Thomson Roc 3205 Remote Control, Auto Search
Solved
Lod
Posted messages
2
Registration date
Status
Membre
-
reg -
reg -
Hello everyone!
I have a Thomson Roc 3205 universal remote control, but I've lost the user manual.
I would like to know if anyone could tell me what steps to take for an automatic search for the television.
Thank you in advance.
I have a Thomson Roc 3205 universal remote control, but I've lost the user manual.
I would like to know if anyone could tell me what steps to take for an automatic search for the television.
Thank you in advance.
7 réponses
You press "set up" (at the bottom left of the numeric keypad) until the red light stabilizes, then press the "TV" button and immediately after press the "PROG+" button. From there, the device searches for the correct code (this may take some time). As soon as the TV changes channel, you immediately press the "MUTE" button and in principle, it's memorized.
I. Check that your equipment is on. If not, turn it on.
II. Press and hold the SETUP button until the red light stays on.
III. Release the button.
IV. Press the button of the desired equipment once.
V. Press the PROG+ button once. After a few seconds, the remote control will start scrolling through the entire list of codes. As soon as it changes the channel, quickly press MUTE.
II. Press and hold the SETUP button until the red light stays on.
III. Release the button.
IV. Press the button of the desired equipment once.
V. Press the PROG+ button once. After a few seconds, the remote control will start scrolling through the entire list of codes. As soon as it changes the channel, quickly press MUTE.
... if you haven't found it yet:
Thomson ROC remote control the solution is here
(also applicable for 3205)
Thomson ROC remote control the solution is here
(also applicable for 3205)
One of the research methods explained in the notice must be used http://www.service-downloads.com//data/files/Thomson/RCU/ROC3205/ROC3205_EN.pdf
--
To err is human, to persist (in error) is diabolical.
--
To err is human, to persist (in error) is diabolical.
New link to download the manual https://mesnotices.20minutes.fr/manuel-notice-mode-emploi/THOMSON/ROC%203205-_F
--
To err is human, to persist is diabolical.
--
To err is human, to persist is diabolical.
But I'm not sure you'll be able to find
- The Grandin brand is a private label brand (particularly from Conforama). If the device is actually from a little-known or unknown manufacturer, it may not be preprogrammed in the remote control.
- There are quite a few issues with DVB-T televisions for the same reason: no preprogramming, but this is because they are too recent.
--
To err is human, to persist is diabolic.
Could you tell me what to do after completing the necessary steps up to MUTE to use the remote control? I reached MUTE, but after that, I don't know how to use the remote.