ink cartridge reprogramming Solved

Question

Hello.

I have refilled my black ink cartridge (with the printline refill kit) but I can't reprogram the cartridge. The printer software recognizes it as empty. Therefore, I can't get it to work.

Thank you in advance.
FREDO2

Configuration: Hp printer 3650

john83300 · Accepted Answer

Well, if you have a triangle button, press it for 5 seconds and release it, and normally the printer will reset and show your cartridges as full, but if that doesn't work, go to google.fr and type "recharge cartridge" + mp or ip4200 and there you will find several sites.

Check the right site where you will have the instructions and the diagram of the procedure.

photo24x36 · Answer

Go to www.ssclg.com for a software reset, otherwise you need a "resetter" to reset the memory counter in the cartridge or the machine (less than €25 online or at ink refill retailers: I've tried it!!! Great!!!)

robène · Answer

Hello,

I am using a Lexmark 12A1980 cartridge on a Benq M610 multifunction printer. The problem is that the cartridge is not even empty and the error E53 displays (which means "color cartridge is missing"). There's nothing to do if we don't change the cartridge. This has happened to me 5 times already. The price of this cartridge is quite consistent. Is there any way to avoid this issue apart from buying a new printer? However, the Lexmark 70 black cartridge has never caused any trouble.

Thank you for your attention

Robene

john83300 · Answer

What brand and type of printer are you using so that I can help you?

Castor · Answer

Hello, I filled the cartridges of my Canon Pixma 4200 before they were empty, yet the printer now indicates that two are empty and refuses to work. What should I do to reprogram it? Thank you.

bob · Answer

Hello,  I have the same issue as Castor, how do I reset my cartridge?

bob · Answer

Hello, Canon Pixma MP450

john83300 · Answer

Go to the beaver's problem; I've given him the answer to his problem.

john83300 · Answer

It's a Canon Pixma MP450; the procedure is the same as for the MP500 and MP830. I'll explain: once you've put your refilled Canon ink cartridge into the printer and closed it, wait for it to show the error message U91 or 41 or 48 or something like that. Then, press the triangle button and keep it pressed for 5 seconds, then release it, and the printer will reset and show the cartridge status as transparent. After that, select yes, and the printer will work as if it had a new cartridge.

bob · Answer

Hello, thank you john83300

ludovic1963 · Answer

Hello, I filled a Lexmark number 1 cartridge and it tells me the cartridge is empty how do I get it to recognize that it's full?

hicham · Answer

Hello  I have a Canon Pixma MP160 printer  the problem is that the printer does not recognize the ink cartridge  please help me

spoons · Answer

Hello,
I have an Epson Stylus Photo 895 printer, but it doesn’t recognize the new color cartridge (Epson T008). The dealer provided a new cartridge, but the problem remains the same: the computer does not recognize the full cartridge. Are there any manipulations to perform? Until now, I had never had this problem, and the black ink cartridge is recognized perfectly. How can we reprogram it?
Thank you in advance for your help.

Grig · Answer

How can we reprogram the HP 350 XL and HP 351 XL cartridges?

format · Answer

impossible to get the printer to work, a refilled cartridge, I have a Canon MP 150, pleeease help :)

céline · Answer

Hello,

I just bought a color cartridge from Francetoner, but my printer doesn't recognize it. It's a remanufactured cartridge, they say it's equivalent to Canon MP 160, but it doesn't work,

Can you please help me?

Thank you

Grig · Answer

I received a gift, an HP C4270 printer (price 79 euros) with a black HP 350 cartridge (for 200 pages) and a color HP 351 cartridge (for 165 pages). After two months, I recharged the cartridges, but they didn't work. The cartridges have a control processor that prevents recharging with ink.
I asked in the forum how to reprogram and recharge the HP 350 and HP 351 cartridges, and no one was able to provide a solution.
I bought two cartridges 350 XL and 351 XL (high capacity) for 55 euros.
With this profitability, I am abandoning it (putting it in the attic).
I have been using my old Canon S 520 for 5 years, and I recharge the cartridges without any problem.

valou · Answer

Hello,  I have an HP 1215 printer; the problem is that I wanted to refill my color ink cartridge. Once I finished, I put it in my printer and nothing happened.  So I removed my black cartridge to see if it was the cause of the issue, but no, my color cartridge only prints in black.  So there is no color ink. Do you know why?  Thank you for your help, I'm about to lose it.

valou · Answer

Thank you for your response:  But it doesn't solve my problem, even when the black cartridge is in place, the color doesn't work whether it's for a photocopy or anything else.  So here I am still at the same point.

dubois · Answer

Hello, I need help, I have a Canon MP970 printer, I installed generic cartridges, and apparently the black cartridge isn't working; the printer says: "the following ink level cannot be detected correctly." Also, I've been told there's a trick to make the printer stop recognizing the ink level of the cartridges. Do you know about it or the website where I can find the procedure to do it...? Thank you very much in advance...

Grig · Answer

I don't know the tricks
I have an HP 4200 All-in-One printer
The HP All-in-One device can only detect the ink levels of genuine HP cartridges.
I refilled the empty cartridges and the printing is fine.
The ink level shows zero. Tried doing the nozzle check, 2-3 cleanings, etc.
Good luck.

Marc5568 · Answer

How did you solve your problem? And what type of cartridge is it?

vir7405 · Answer

Hello,I have a Brother DCP-130C printer, I bought compatible cartridges but not Brother brand (too expensive) and it says ink empty, how can I reprogram the cartridges or the printer, thank you in advance...

Grig · Answer

I don't know how to reprogram.
I have an HP C 4200. The cartridges have print heads.
I refill the original cartridges. The printer indicates empty cartridges.
The printing is done correctly with "empty cartridges" (refill).
Try.
Grig

carhaix · Answer

The printer is not working Lexmark, we filled the cartridges with the ink cartridge refill kit we put them in the printer and it doesn't work.

billebokey · Answer

Hello

I have the same problem here. I have a Lexmark X4450 printer. Last night, I filled my cartridges with a refill kit, but the printer refuses to print in color because it detects the cartridge as empty.
Is there something I need to do... I'm a teacher and print every day, but not for myself... for my job which doesn't cover the cost of cartridge purchases... My budget will explode if I have to buy new cartridges every time.

Thank you for your help.

Valérie

billebokey · Answer

Error with my printer reference. It's a 4550...  Thank you for your help  Valérie

buca · Answer

Hello!  Do you know about this?  http://www.supersite.fr//index.htm  This might interest everyone, especially those who do a lot of printing... I haven't tried it personally (no personal printer and constantly moving lol), but I've read some very positive reviews...  To those who understand... greetings!  buca

bernou 14 · Answer

for ADELIO: the button you mentioned does not exist on the Lexmark X 4550. There is no indicator light either. Thank you for your response.

john83300 · Answer

Hello, I would like to inform you that there is a resetter for Canon cartridges series 5 and 8, which allows you to reprogram the refilled Canon cartridges, but be careful, it only works with original cartridges. I’m giving you the website address where you can buy a resetter for Canon printers https://www.encre.com/®-serie-5---8.html There are other Canon printers on this site; you will just need to search a little bit, and it works. I bought one last week and reprogrammed the ink of my refilled printer with this little device.

clement · Answer

Here is my Epson printer, I bought a black cartridge and I still can’t print. However, my blue and yellow cartridges are empty even though I only use black, so it should work, but it doesn’t.

evlyse · Answer

Hello, I have a Canon Pixma 140 printer and I'm having a problem with the ink cartridges I purchased from Incklub; my printer doesn't want to recognize them. Previously, I bought them from a supermarket and had no issues. Additionally, I'm a novice in computer matters, and many technical terms confuse me. What is a generic cartridge, and this site mentions cartridges with chips; what should I do??? Thank you for your responses.

ami69 · Answer

Hello everyone, I have an Epson CX3650. I put in a compatible cartridge which worked once or twice, and now the printer tells me the cartridge is empty. I removed the upgrade and it still doesn't work. Which printer do you recommend that doesn't cause too many problems for refilling??

gargamel · Answer

POUR LES CARTOUCHES CANON SÉRIE PG 37 38 40 41 50 51, C’EST TOUT SIMPLE : VOUS APPUYEZ 5 SECONDES SUR LE BOUTON QUI CLIGNOTE JAUNE.

timbmeyer · Answer

To reprogram the cartridges, you can go to http://aldora.fr/. There are also refill kits, ink cartridges, and even laser toners and photo paper!

sofi · Answer

Pour la CP 1215, il faut appuyer sur les deux touches, éteindre puis rallumer et c'est tout.

Françoise Barbier · Answer

Françoise Barbier-Nvelle using the HP Photosmart+ series-B209 printer  After using my new printer for about 60 prints, including several color photo enlargements, the cartridges are already empty and show the alert sign (!), except for the orange cartridge which has a question mark. It's disappointing, but manageable. I will go to Société Bachler in Villards/sur/Glâne (Fribourg, Switzerland) to buy the 4 cartridges as I cannot unplug and transport the device (too heavy). But what I can't do is move and update the carriage to be able to carry out this maneuver to replace the empty cartridges with the 4 new ones. Please tell me how to do it: which buttons to press to release this carriage. Thank you in advance. FRANCOISE BARBIER

annblanc · Answer

HP C4580 PRINTER DISPLAYS BLACK CARTRIDGE MISSING OR NOT DETECTED BUT BOTH CARTRIDGES ARE IN PLACE AND IT WORKED BEFORE.

helene30 · Answer

comment changer une cartouche d'encre ?

andry 91 · Answer

nothing concrete the proposed reset is a joke ugh!!!!

life363 · Answer

We are dealers in Italy of refill cartridges that we import through our company in China. We sell to almost all of Italy, and now we are trying to establish ourselves abroad, for example in France. Our brand is synonymous with reliability and expertise. Visit our website www.life365.eu and request information, our prices are unbeatable.

ferd3 · Answer

Hello, I just bought an HP Photosmart B010 printer, original HP ink cartridges were provided with it, but the printer keeps telling me that these cartridges are not compatible... can you help me?

pouchounne · Answer

Hello everyone, I've had the same problem. And after searching all the forums, I found a workaround so that the Lexmark center doesn't block your cartridges. You put the new one in, and when it blocks you put the old one back in, try again, and then put the new one back in and voilà, it works, it confuses the chip!!! Enjoy!

Ink cartridge reprogramming

43 answers

Wrong email address twice

Display the import window when opening a .csv

Police site...

Rakuten and the -20%/month rate

Rayman cheat codes don’t work on psp

Code pin invalide

Ad-free music

Cannot use my ctp18 tablet with meetingbar

Unchecked checkbox

Tiktok limits suggestive content to 18+ users