Error code e 2 7 Canon MP 150 printer
joce
-
mariehel974 Posted messages 3 Status Member -
mariehel974 Posted messages 3 Status Member -
Hello,
I'm going crazy !!!!! I need to print and I keep getting an error code on my printer E 2 then 7 and it just loops over and over E 2 7. Can someone shed some light on this for me, I can't take it anymore .......
Thanks in advance.
Joce
Configuration: Windows Vista / Internet Explorer 7.0
I'm going crazy !!!!! I need to print and I keep getting an error code on my printer E 2 then 7 and it just loops over and over E 2 7. Can someone shed some light on this for me, I can't take it anymore .......
Thanks in advance.
Joce
Configuration: Windows Vista / Internet Explorer 7.0
3 answers
Hello;
Before going "Crazy", check this link (towards the middle of the page MP150 with error codes and solutions)
Please let me know the result
http://imprimante-en-question.blogspot.com/search/label/Canon%20pixma
To unlock error E27:
Error E27, the ink absorber is full. To reset the counters:
1- Turn off the printer.
2- Press "Power" and at the same time "Stop/Reset".
3- Release "Stop/Reset" and press it twice again.
4- Release both buttons.
5- When the "on/off" lights are green, press "Stop/Reset" 4 times.
6- Turn off the printer and turn it back on.
Next:
- Open the printer.
2- Locate the absorber, it is the spongy tab located under the axis where the cartridges move. If you touch it with your fingers, the ink will stain you. So there is no possibility of error.
The ink deposits on this absorber and solidifies. It can no longer pass through this sponge.
3- Take cotton swabs, dip them in distilled water and clean the absorber.
Best regards
Before going "Crazy", check this link (towards the middle of the page MP150 with error codes and solutions)
Please let me know the result
http://imprimante-en-question.blogspot.com/search/label/Canon%20pixma
To unlock error E27:
Error E27, the ink absorber is full. To reset the counters:
1- Turn off the printer.
2- Press "Power" and at the same time "Stop/Reset".
3- Release "Stop/Reset" and press it twice again.
4- Release both buttons.
5- When the "on/off" lights are green, press "Stop/Reset" 4 times.
6- Turn off the printer and turn it back on.
Next:
- Open the printer.
2- Locate the absorber, it is the spongy tab located under the axis where the cartridges move. If you touch it with your fingers, the ink will stain you. So there is no possibility of error.
The ink deposits on this absorber and solidifies. It can no longer pass through this sponge.
3- Take cotton swabs, dip them in distilled water and clean the absorber.
Best regards
If the link above doesn't work, here's another one to resolve the E27 error:
http://imprimante-en-question-2.blogspot.com/2013/05/imprimante-canon-jet-dencre-pixma-mp150.html