Testeur de debit de donnees
sauveurbueno1
Messages postés
68
Statut
Membre
-
sauveurbueno1 Messages postés 68 Statut Membre -
sauveurbueno1 Messages postés 68 Statut Membre -
testeur de debit de donnees
Erreur dans le logiciel Studio 8, il me marque "Capture impossible. Le taux de transfert du disque C: est inférieur au taux minimum de 4000 Koctet/seconde.", lorsque je clique sur le bouton Capture.comment faire pour tranferer mes video et les mettre sur dvd et les lire sur mon lecteur de salon?
j ai un pentium 4 3.2 ghertz annee 2005
2 fois 100 GO de disque durs 7200 tours
1024 de DDram
je suis aller sur la config de mes disques durs ils sont en DMA les deux le C et le D mais il n y a rien a faire impossible de capturer
avez vous d autres idees j ai reussi a trouver ce message mais il est en anglais quelqu un pourrai til me le traduire ? svp
merci
This error message occurs only with users capture from a 1394 host controller with Studio.
The first time you enter the Capture module in Studio, a test runs to determine the read and write speed of your hard drive. This test takes about a minute to complete and it tests the drive you installed the Studio software on, which typically will be drive C. If you have other drive(s) for capturing video, the test will be run on them when you select these drives to capture to.
Studio DV/DV 7 requires that the hard drive, where video will be captured, be able to sustain a data transfer rate of at least 4000 Kbytes/second. This data rate is necessary in order to transfer the video from the DV tape to the hard drive without any loss of data. Any lost data will show up as dropped frames and video with dropped frames plays back with visible stutter, making the captured footage unusable. Captured video that is "jerky" or "stutters" and can only be corrected by recapturing the video until no frames are dropped.
To run the hard drive test on other drives (for the first time):
Click on the "Capture" tab.
On the diskometer, click on the file cabinet icon. Use the "Save in" box to change the drive letter to your other hard drive. Click OK.
The hard drive test will run.
To run the hard drive test on any drive (after the initial test):
Click on the "Capture" tab.
On the diskometer, click on the file cabinet icon. Use the "Save in" box to change the drive letter to your other hard drive. Click OK.
Click on the "Settings" button
Click on the "Test Data Rate" button to run the test.
Note: The test may take up to a minute to complete.
If your / read and write rates are both above 4000 Kbytes/second then you can begin to capture. If they are not, see the steps below.
If some or none of your hard drives give read and write rates over 4000 Kbytes/second, then you may not have DMA enabled. Click here to access the document on how to turn on DMA on your hard drive.
Erreur dans le logiciel Studio 8, il me marque "Capture impossible. Le taux de transfert du disque C: est inférieur au taux minimum de 4000 Koctet/seconde.", lorsque je clique sur le bouton Capture.comment faire pour tranferer mes video et les mettre sur dvd et les lire sur mon lecteur de salon?
j ai un pentium 4 3.2 ghertz annee 2005
2 fois 100 GO de disque durs 7200 tours
1024 de DDram
je suis aller sur la config de mes disques durs ils sont en DMA les deux le C et le D mais il n y a rien a faire impossible de capturer
avez vous d autres idees j ai reussi a trouver ce message mais il est en anglais quelqu un pourrai til me le traduire ? svp
merci
This error message occurs only with users capture from a 1394 host controller with Studio.
The first time you enter the Capture module in Studio, a test runs to determine the read and write speed of your hard drive. This test takes about a minute to complete and it tests the drive you installed the Studio software on, which typically will be drive C. If you have other drive(s) for capturing video, the test will be run on them when you select these drives to capture to.
Studio DV/DV 7 requires that the hard drive, where video will be captured, be able to sustain a data transfer rate of at least 4000 Kbytes/second. This data rate is necessary in order to transfer the video from the DV tape to the hard drive without any loss of data. Any lost data will show up as dropped frames and video with dropped frames plays back with visible stutter, making the captured footage unusable. Captured video that is "jerky" or "stutters" and can only be corrected by recapturing the video until no frames are dropped.
To run the hard drive test on other drives (for the first time):
Click on the "Capture" tab.
On the diskometer, click on the file cabinet icon. Use the "Save in" box to change the drive letter to your other hard drive. Click OK.
The hard drive test will run.
To run the hard drive test on any drive (after the initial test):
Click on the "Capture" tab.
On the diskometer, click on the file cabinet icon. Use the "Save in" box to change the drive letter to your other hard drive. Click OK.
Click on the "Settings" button
Click on the "Test Data Rate" button to run the test.
Note: The test may take up to a minute to complete.
If your / read and write rates are both above 4000 Kbytes/second then you can begin to capture. If they are not, see the steps below.
If some or none of your hard drives give read and write rates over 4000 Kbytes/second, then you may not have DMA enabled. Click here to access the document on how to turn on DMA on your hard drive.
A voir également:
- Testeur de debit de donnees
- Fuite données maif - Guide
- Testeur de performance pc - Guide
- Supprimer les données de navigation - Guide
- Trier des données excel - Guide
- Debit pro - Télécharger - Outils professionnels
