View original (French)

MY MP4 WON'T TURN ON.

Solved
Fierpa Posted messages 15 Status Member -  
 love -
Hello,
my touchscreen mp4 > KLIVER R902 won't turn on no matter what I do. It only starts when I connect it via USB! If you have a solution, please let me know.
Thank you in advance

Configuration: Windows Vista / Internet Explorer 7.0

8 answers

  1.
    Dikeus Posted messages 1166 Status Member 126
     
    Or a problem with the power button opens it and checks the soldering of the connections
    --
    Let's complicate our lives, it's easier.
    6
  2. sam74
     
    You have a hard time disconnecting it one day, and there's a short circuit in your reader.
    It's trash!
    3
  3. Fierpa Posted messages 15 Status Member
     
    Thank you, but what is a hard reset?
    =)
    1
    1. gouby Posted messages 386 Registration date   Status Contributor Last intervention   6 491
       
      press the menu button + middle button for 10 seconds, do it while connected to the PC
      or alternatively, press the button at the top (it should be power) + middle button for 10 seconds also while connected
      4
    2. love
       
      Thank you, Goubi. I had the same problem. I did a hard reset and it worked!!!
      0
  4. Dikeus Posted messages 1166 Status Member 126
     
    The solution is the guarantee.
    It's clichéd but the safest!
    0
  6. Fierpa Posted messages 15 Status Member
     
    Yeah, but I'm not guaranteed. Thanks anyway.
    0
  7. Fierpa Posted messages 15 Status Member
     
    Thank you, I will check the welds, but I'm afraid it might not be that.
    0
    1. Dikeus Posted messages 1166 Status Member 126
       
      me too but otherwise it's dead
      0
  8. gouby Posted messages 386 Registration date   Status Contributor Last intervention   6 491
     
    Hello

    try a hard reset when it's plugged in via USB
    --
    O.o°* ♪♪♫ SHEBAM ! POW ! BLOP ! WIZZ ! ♫♪♪ *°o.O 
    °º¤ø,¸¸,ø¤º°'°º¤ø,¸Everything will be fine.............or not!¸,°º¤ø,¸¸,ø¤º°'°º¤ø,¸
    0
  9. Fierpa Posted messages 15 Status Member
     
    thank you so much to both of you, gouby was right, thank you very much! =))
    0
    1. Dikeus Posted messages 1166 Status Member 126
       
      validate his answer and mark as resolved
      -1
    2. Fierpa Posted messages 15 Status Member
       
      I validate how?
      -1
    3. Dikeus Posted messages 1166 Status Member 126
       
      It's done.
      -1
    4. Fierpa Posted messages 15 Status Member
       
      ok
      -1
    5. gouby Posted messages 386 Registration date   Status Contributor Last intervention   6 491
       
      You're welcome :)
      0