\SYSTEM32\HAL.DLL. Solved

Question

Hello
<WINDOWS ROOT>\SYSTEM32\HAL.DLL is missing or corrupt. Please reinstall this file.
At startup, this is what it shows me in black and white. Safe mode doesn't work either.
This all happened after a change in Startup and Recovery: partition.......(2) to (1). And then, boom, disaster.
I don't have an XP CD to reinstall. I've used a boot disk and I have A:>. I don't know what to do to go into System Startup and Recovery to restore the original data?
HELP ME PLEASE!!!!!!
I have a second PC with XP Pro but no burner, just a CD-ROM and floppy drive.
No warranty left.

yopcity2004 · Accepted Answer

I finally solved the problem  I reinstalled with F10 and it's ok  thank you

garmyan · Answer

Hello, I have the same problem that you had.

prophil · Answer

Hello

same problem <windows root>\system32\hal.dll.
black screen
it asks me to reinstall a copy of the file above
but how ????
I pressed F10 but it didn’t help me, I went back
to the same place
who can help me
thank you

fredo45 · Answer

Hello
I have the same problem, the trouble is that I only have access to the back, I tried the recovery console but I can only get to the Windows XP logo and not to the welcome screen, which means that even pressing R, the PC just starts its cycle again. Help me or I will throw the PC out the window.

bidulle · Answer

I resolved this problem by restoring the boot.ini file, a system file that can be made visible in Tools, Folder Options, then View. The file is usually located on C:\.

yopcity2004 · Answer

Thank you!! to everyone!!!

wissal · Answer

same problem "windows root"/system32/hal.dll. missing or corrupted file reinstall this file I don't have an xp cd to reinstall. what should I do

aleks17 · Answer

Hello
<WINDOWS ROOT>\SYSTEM32\HAL.DLL is missing or corrupt. Please reinstall this file.
At startup, this is what it shows me in black and white. Safe mode doesn't work either.
This all happened after a change in Startup and Recovery: partition.......(2) to (1). And then, boom, disaster.
I don't have an XP CD to reinstall. I've used a boot disk and I have A:>. I don't know what to do to go into System Startup and Recovery to restore the original data?
HELP ME PLEASE!!!!!!
I have a second PC with XP Pro but no burner, just a CD-ROM and floppy drive.
No warranty left.

MANUELA · Answer

My PC crashed, and I found myself in front of a black screen indicating Windows root system32 hall.dll
when I manipulate some commands, it replies access denied
why
what should I do
thank you in advance

madyana · Answer

same issue <windows root>\system32\hall.dll

yakhousam · Answer

HALL.DLL missing or corrupted
If you receive an error indicating that the hall.dll file is missing or corrupted, it may be due to a misconfiguration of BOOT.INI located on C:\

-Insert the Windows XP CD into your CD-ROM drive and then start your computer
-When you encounter the first option R=Repair, press the R key
-Enter the number corresponding to the installation you want to repair
-Type bootcfg /list to list the current entries in BOOT.INI
-Type bootcfg /rebuild to repair it
-Remove the CD-ROM and then type EXIT

http://www.astucewindows.com/WinXp/Reparation/Reparation_05.htm

cris · Answer

much simpler, go to your setup and set the C: drive as master!

Le hasard · Answer

Hello,
my antivirus has detected a dangerous file C:\WINDOW\SYSTEM32\USER32.DLL
would it be possible to repair it without using an installation CD?
Are there any online solutions to repair or replace this damaged file?
Thank you again;
Best regards,
Chance

<racine windows>\system\hal.dll · Answer

And what if we don't have a CD player???? :blink:

B.L · Answer

You need to go buy the license, about 70, and if it happens again in a year, you'll have to pay for the license again.

Mikami-Teru · Answer

Well, hello everyone... For those who have issues with DLL, just insert the Windows XP installation disk and restart the computer... Then keep holding R. The CD will start, just follow the on-screen steps, select R = Repair, then type 1 and hit enter, then if all goes well it will ask for a password, just type "enter", haha, hit enter and there you go, type "bootcfg /rebuild"
You wait and then hit enter, then Exit
you remove the CD and restart, AND THAT'S IT!! =D

SAD/40 · Answer

Good evening, everyone: I'm having the same problem with hal.dll, as I have 2 operating systems: XP Pro and XP. I carefully reviewed the various proposed solutions, but unfortunately, there were no results. Since by pressing F8 I could access XP on my C: drive, where I have both systems, I went into XP Pro: WINDOWS. SYSTEM32, and indeed I was missing this file. I downloaded the file to a USB stick, and I copied/pasted it into SYSTEM32 from XP Pro; after rebooting, it worked perfectly. I admit that it wasn't very complicated for me since I have both systems on the same drive. That said, if this can help someone, my skills stop there; I also struggle like everyone else.
Good luck to all

kiffnom1 · Answer

Thanks yakhousam for the solution  It worked perfectly^^ I just had to do /chkdsk (it advised me to do so after the command /bootcfg /list) Then, as you said: bootcfg /rebuild  I typed exit, and there you go, that was it.  P.S: This was my first message on this forum that I haven't checked in a long time. So I want to thank everyone for the wonderful advice and opinions circulating on CommentCaMarche.net

cedric_06 · Answer

Quelqu'un pourrait me donner le fichier hall.ddl à télécharger pour pouvoir l'insérer dans mon disque en esclave ?

rsk · Answer

you need to press alt and f10 it worked for me

clo · Answer

bonjour à tous. My laptop is asking for the Windows root cd \system32\hal.dll. I don't have it. How can I recover it??? I can't open any folders. Thank you in advance.

lilik17 · Answer

I don’t know what to do anymore, could someone help me please?

nirka50500 · Answer

I ran bootcfg /rebuild, but after a while, a message appears: Add the installation to the boot options list? Yes, No, All What should I choose?

l0l@0l0 · Answer

Hello, if F10 is not working, try to check if the hard drive is plugged in correctly!!!

adriensup · Answer

Hello, excuse me, I have the same problem since I defragmented my PC (Windows XP Home Edition). When I turn on my computer, it asks me which operating system to use and I select Windows...... then it shows me \system32/hal.dll is missing or corrupt. Please help me, I really need assistance. Oh, I almost forgot, the recovery disks start up but don't open the folder. Thank you for your help. Adriensup  -- 1 it's okay 2 it's good 3 it's fine 4 AND WHAT ELSE!!!

elec-trom · Answer

Hello everyone,

I am currently in front of my screen and the message: Windows could not start because the following file is missing or corrupt:
<Windows Root>\system32\hal.dll.
Please reinstall a copy of the above file.
So I started a system recovery, but nothing works...
I have the system: Windows XP Media Center Edition 2005 HP.
I press "F8 safe mode" but no operations change anything. I do not have a system recovery CD... :(
To be honest, I am lost! And I need help.
If anyone has found the solution please.

<WINDOWS ROOT >\SYSTEM32\HAL.DLL.

26 answers

Ssd in an acer predator helios neo 18 ai pnh 18-72

Too much space in footnotes

Javascript round to 2 decimal places

Dissociate 2 ipados devices with the same password

Ipad air battery status

After installing linux mint on an hp elitebook 8570

Regular wi-fi dropouts and severe wi-fi slowdowns

Whatsapp with parental controls

Excel file bug

Remove bing