The exchange period has expired
Solved
Jérem_35
-
Naruto Uzumaki -
Naruto Uzumaki -
Hello,
I'm going to the internet connection settings, I reply to the message that appears, then I set it to easy, then to wireless, I scan and it doesn't recognize my Livebox (the new one, I don't know if the problem comes from it) intensity 100%, the security is WPA2-PSK(AES) I can't change it to WEP or WAP it still doesn't work it finds the SSID I have WPA-.. in the WLAN settings I write I'm going to press the button on the Livebox and there's more than one so I type my key that I noted and it checks the configuration and then it says "The key exchange timeout has expired. The entered WPA key may be incorrect and I can't go any further the MAC filtering is not enabled... if anyone knows how to do this it would be nice, thanks in advance (PS3 Slim)
I'm going to the internet connection settings, I reply to the message that appears, then I set it to easy, then to wireless, I scan and it doesn't recognize my Livebox (the new one, I don't know if the problem comes from it) intensity 100%, the security is WPA2-PSK(AES) I can't change it to WEP or WAP it still doesn't work it finds the SSID I have WPA-.. in the WLAN settings I write I'm going to press the button on the Livebox and there's more than one so I type my key that I noted and it checks the configuration and then it says "The key exchange timeout has expired. The entered WPA key may be incorrect and I can't go any further the MAC filtering is not enabled... if anyone knows how to do this it would be nice, thanks in advance (PS3 Slim)
Configuration: Windows XP Firefox 3.5.6
5 answers
-
First, in your Livebox, go to the following address:
http://192.168.1.1 (Livebox configuration address).
Username: admin
Password: admin this is common for all Sagem or Inventel Liveboxes.
Then go to:
- Configuration
then to Advanced
and finally to Wireless
There, you need to check: WEP Security only if WPA Security is checked. WEP is said to work wonderfully well. Then click on SUBMIT.
The Livebox will then restart; you will lose your internet connection while the Livebox is restarting, the connection will come back in 2 small minutes (wait for the @ symbol to be fixed).
Once the Livebox is back, go to your PS3, click on Network Settings.
Easy, then on Scan, then click on your Livebox or router.
Three choices are available to you: No WEP and WPA ..... something.
Click on WEP, then enter your WEP key (normally found under your Livebox). Lowercase letters work on the PS3.
Once the key is entered, do not click Enter on the keyboard, go to your Livebox and put it in WIFI association: Press button 1. Normally a red LED should blink. For SAGEM, it is a small black stick underneath. Once your Livebox is in association mode, go back to your PS3.
Click Enter to enter the key. Wait and see what the PS3 tells you.
Then click on automatic. It’s done. If Automatic doesn’t work, try Manual by entering the following.
IP Address: 192.168.1.5 (Choose your number between 2 and 10).
Subnet Mask: 255.255.255.0
Gateway Address: 192.168.1.1
Primary DNS: 80.10.246.2
Secondary DNS: 80.10.246.149 If these DNS prove to be incorrect, check which ones are on your Livebox, so return to the address http://192.168.1.1
then go to System Information and note down on a piece of paper the primary DNS server and the secondary DNS server, then enter them into your PS3.
--
-
Hello everyone, I have the same problem: the deadline for the key exchange has expired, the entered WPA key may be incorrect, but this has been happening since I got the Livebox 2 from Orange because with this crap I can no longer set the WEP option, so it's a mess. If anyone has a SOLUTION, it is welcome. Thank you in advance.
-
-
-
-
-
-
-
-
I'm in the same situation as you, I have a PS3 Slim, I enter the WPA code but it says that the time for key exchange has elapsed, etc... I recommend contacting the store where you bought it and they will let you know, I think.
-