View original (French)

Engraving issue

Anonymous user -  
 Anonymous user -
Hello,

I recently installed CDBurnerXP (on Vista) and when I burn an ISO file to my CD, an error message occurs:

22:09:50 ISO file ToutouLinux_4.1.2Retro.iso loaded
22:10:08 Burning process started.
22:10:15 Burning process started at 40x (7,057 KB/s)
22:10:21 Error occurred: Internal SDK error:
CStarBurn_ScsiTransportSPTI::ExecuteCDB(): Command failed

Valid = yes, CDB Size = 10, Sense Size = 32
CDB: 2A 00 00 03 FD 27 00 00 1E 00 00 00 00 00 00 00
Sense 00: 70 00 25 00 00 00 00 0A 2A 02 03 80 64 00 00 00
Sense 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Transport status = 0, Target Status = 2, HostAdapter Status = 0

If anyone has a solution..

Thank you in advance.
Configuration: Windows Vista Firefox 3.0.15

13 answers

  1.
    Psycho08 Posted messages 30 Status Member 2
     
    Why use a DVD? Unless this image is that of a DVD, it can burn the ISO onto a CD-R; 98.5 MB on a DVD is wasteful. Unless CdBurnerXP only burns DVD images, but in that case, the software is useless.
    1
  2. Psycho08 Posted messages 30 Status Member 2
     
    Are you trying to engrave in overcapacity?
    0
  3. Anonymous user
     
    La surcapacité désigne une situation où une installation, un service ou un système fonctionne au-delà de sa capacité maximale prédéfinie. Cela peut se produire dans différents contextes, comme les transports, la production industrielle ou même les infrastructures d'accueil, entraînant ainsi une surcharge qui peut affecter le fonctionnement et l'efficacité.
    0
  4. Psycho08 Posted messages 30 Status Member 2
     
    It seems that Cd burner Xp has this problem recurrently: you may want to consider another software
    : InfraRecorder, burnatonce, IMGBurn, etc...
    0
  6. Psycho08 Posted messages 30 Status Member 2
     
    There is no offense in asking: overcapacity is when you try to burn more than what the CD can hold, for example, you put 710 MB on a standard 700 MB CD.
    0
  7. Anonymous user
     
    ahhhh ok !

    Well no no...

    I formatted my CD, and now there are 186 MB left (the file I want to burn is 98.5 MB)
    0
  8. aloes Posted messages 6338 Status Member 790
     
    This software must work on Vista. Have you checked your ISO image?
    You set everything up correctly, but use a DVD, not a CD.

    Here’s how to do it (in English):
    - choose "Burn ISO image"
    - import ISO file under "Select ISO image to burn", set the speed to the lowest (after inserting DVD) on the right
    - under "Target device" check if the correct drive is indicated
    - further down check "finalize disc" and "Verification after burning"
    - finally click at the bottom on "Burn Disc"

    That’s all.

    aloes
    0
  9. Psycho08 Posted messages 30 Status Member 2
     
    Alright, so the CD you want to burn is a CD-RW. I need to know what you want to do: normally, an ISO file is the image of a CD that we want to burn onto a blank CD so that we can read the CD later. Unless you want to make a copy of this .iso file, it will not be readable unless you open it with a virtual drive...
    0
  10. Anonymous user
     
    I want to burn an operating system (Toutou Linux) so that I can run it on an old PC.
    0
  11. aloes Posted messages 6338 Status Member 790
     
    I don't think it works.
    aloe vera
    0
  12. Psycho08 Posted messages 30 Status Member 2
     
    The original support for Toutou Linux is likely a CD, considering it was only 98.5 MB. I would burn the image onto a new CD-R blank using the procedure mentioned by Aloes.

    Good luck.
    0
  13. Psycho08 Posted messages 30 Status Member 2
     
    Don't forget to post your solved issue if it works!
    0
  14. Anonymous user
     
    Uh...

    I don't understand everything, sorry ^^'

    Can you recap a bit from the beginning, please?

    Thank you and sorry ^^
    0