probleme formulaire cgi Fermé

Question

Bonjour à tous, je ne sais pas comment vérifier si l'envoi de mon formulaire s'effectue correctement. J'ai ai script formmail.cgi, je rempli mon formulaire a priori l'envoi ce fait normalement car j'ai ma page redirect qui s'affiche, mais lorsque je vais dans ma boite mail aucun message n'apparait. Pouvez vous m'aider merci. voici le code :

kij_82 · Answer

fait voir le code de formail.cgi sinon peut pas dire grand chose..

gatogat · Answer

Voici le script cgi #!/usr/bin/perl ############################################################################## # FormMail Version 1.6 # # Copyright 1995-1997 Matt Wright mattw@worldwidemart.com # # Created 06/09/95 Last Modified 05/02/97 # # Matt's Script Archive, Inc.: http://www.scriptarchive.com/ # ############################################################################## # COPYRIGHT NOTICE # # Copyright 1995-1997 Matthew M. Wright All Rights Reserved. # # # # FormMail may be used and modified free of charge by anyone so long as this # # copyright notice and the comments above remain intact. By using this # # code you agree to indemnify Matthew M. Wright from any liability that # # might arise from its use. # # # # Selling the code for this program without prior written consent is # # expressly forbidden. In other words, please ask first before you try and # # make money off of my program. # # # # Obtain permission before redistributing this software over the Internet or # # in any other medium. In all cases copyright and header must remain intact # ############################################################################## # Define Variables # # Detailed Information Found In README File. # # $mailprog defines the location of your sendmail program on your unix # # system. # #$mailprog = '/usr/lib/sendmail'; $mailprog = '/usr/sbin/sendmail'; # @referers allows forms to be located only on servers which are defined # # in this field. This security fix from the last version which allowed # # anyone on any server to use your FormMail script on their web site. # @referers = ('monsite.com'); # Done # ############################################################################## # Check Referring URL &check_url; # Retrieve Date &get_date; # Parse Form Contents &parse_form; # Check Required Fields &check_required; # Return HTML Page or Redirect User &return_html; # Send E-Mail &send_mail; sub check_url { # Localize the check_referer flag which determines if user is valid. # local($check_referer) = 0; # If a referring URL was specified, for each valid referer, make sure # # that a valid referring URL was passed to FormMail. # if ($ENV{'HTTP_REFERER'}) { foreach $referer (@referers) { if ($ENV{'HTTP_REFERER'} =~ m|https?://([^/]*)$referer|i) { $check_referer = 1; last; } } } else { $check_referer = 1; } # If the HTTP_REFERER was invalid, send back an error. # if ($check_referer != 1) { &error('bad_referer') } } sub get_date { # Define arrays for the day of the week and month of the year. # @days = ('Dimanche','Lundi','Mardi','Mercredi', 'Jeudi','Vendredi','Samedi'); @months = ('Janvier','Fevrier','Mars','Avril','Mai','Juin','Juillet', 'Aout','Septembre','Octobre','Novembre','Decembre'); # Get the current time and format the hour, minutes and seconds. Add # # 1900 to the year to get the full 4 digit year. # ($sec,$min,$hour,$mday,$mon,$year,$wday) = (localtime(time))[0,1,2,3,4,5,6]; $time = sprintf("%02d:%02d:%02d",$hour,$min,$sec); $year += 1900; # Format the date. # $date = "$days[$wday], $months[$mon] $mday, $year at $time"; } sub parse_form { # Define the configuration associative array. # %Config = ('recipient','', 'subject','', 'email','', 'realname','', 'redirect','', 'bgcolor','', 'background','', 'link_color','', 'vlink_color','', 'text_color','', 'alink_color','', 'title','', 'sort','', 'print_config','', 'required','', 'env_report','', 'return_link_title','', 'return_link_url','', 'print_blank_fields','', 'missing_fields_redirect',''); # Determine the form's REQUEST_METHOD (GET or POST) and split the form # # fields up into their name-value pairs. If the REQUEST_METHOD was # # not GET or POST, send an error. # if ($ENV{'REQUEST_METHOD'} eq 'GET') { # Split the name-value pairs @pairs = split(/&/, $ENV{'QUERY_STRING'}); } elsif ($ENV{'REQUEST_METHOD'} eq 'POST') { # Get the input read(STDIN, $buffer, $ENV{'CONTENT_LENGTH'}); # Split the name-value pairs @pairs = split(/&/, $buffer); } else { &error('request_method'); } # For each name-value pair: # foreach $pair (@pairs) { # Split the pair up into individual variables. # local($name, $value) = split(/=/, $pair); # Decode the form encoding on the name and value variables. # $name =~ tr/+/ /; $name =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C", hex($1))/eg; $value =~ tr/+/ /; $value =~ s/%([a-fA-F0-9][a-fA-F0-9])/pack("C", hex($1))/eg; # If they try to include server side includes, erase them, so they # aren't a security risk if the html gets returned. Another # security hole plugged up. $value =~ s///g; # If the field name has been specified in the %Config array, it will # # return a 1 for defined($Config{$name}}) and we should associate # # this value with the appropriate configuration variable. If this # # is not a configuration form field, put it into the associative # # array %Form, appending the value with a ', ' if there is already a # # value present. We also save the order of the form fields in the # # @Field_Order array so we can use this order for the generic sort. # if (defined($Config{$name})) { $Config{$name} = $value; } else { if ($Form{$name} && $value) { $Form{$name} = "$Form{$name}, $value"; } elsif ($value) { push(@Field_Order,$name); $Form{$name} = $value; } } } # The next six lines remove any extra spaces or new lines from the # # configuration variables, which may have been caused if your editor # # wraps lines after a certain length or if you used spaces between field # # names or environment variables. # $Config{'required'} =~ s/(\s+|\n)?,(\s+|\n)?/,/g; $Config{'required'} =~ s/(\s+)?\n+(\s+)?//g; $Config{'env_report'} =~ s/(\s+|\n)?,(\s+|\n)?/,/g; $Config{'env_report'} =~ s/(\s+)?\n+(\s+)?//g; $Config{'print_config'} =~ s/(\s+|\n)?,(\s+|\n)?/,/g; $Config{'print_config'} =~ s/(\s+)?\n+(\s+)?//g; # Split the configuration variables into individual field names. # @Required = split(/,/,$Config{'required'}); @Env_Report = split(/,/,$Config{'env_report'}); @Print_Config = split(/,/,$Config{'print_config'}); } sub check_required { # Localize the variables used in this subroutine. # local($require, @error); if (!$Config{'recipient'}) { if (!defined(%Form)) { &error('bad_referer') } else { &error('no_recipient') } } # For each require field defined in the form: # foreach $require (@Required) { # If the required field is the email field, the syntax of the email # # address if checked to make sure it passes a valid syntax. # if ($require eq 'email' && !&check_email($Config{$require})) { push(@error,$require); } # Otherwise, if the required field is a configuration field and it # # has no value or has been filled in with a space, send an error. # elsif (defined($Config{$require})) { if (!$Config{$require}) { push(@error,$require); } } # If it is a regular form field which has not been filled in or # # filled in with a space, flag it as an error field. # elsif (!$Form{$require}) { push(@error,$require); } } # If any error fields have been found, send error message to the user. # if (@error) { &error('missing_fields', @error) } } sub return_html { # Local variables used in this subroutine initialized. # local($key,$sort_order,$sorted_field); # If redirect option is used, print the redirectional location header. # if ($Config{'redirect'}) { print "Location: $Config{'redirect'}\n\n"; } # Otherwise, begin printing the response page. # else { # Print HTTP header and opening HTML tags. # print "Content-type: text/html\n\n"; print "\n \n"; # Print out title of page # if ($Config{'title'}) { print " $Config{'title'}\n" } else { print " Thank You\n" } print " \n \n \n"; # Print custom or generic title. # if ($Config{'title'}) { print "

$Config{'title'}

\n" } else { print "

Thank You For Filling Out This Form

\n" } print "\n"; print "Below is what you submitted to $Config{'recipient'} on "; print "$date

\n"; # Sort alphabetically if specified: # if ($Config{'sort'} eq 'alphabetic') { foreach $field (sort keys %Form) { # If the field has a value or the print blank fields option # # is turned on, print out the form field and value. # if ($Config{'print_blank_fields'} || $Form{$field}) { print "$field: $Form{$field}

\n"; } } } # If a sort order is specified, sort the form fields based on that. # elsif ($Config{'sort'} =~ /^order:.*,.*/) { # Set the temporary $sort_order variable to the sorting order, # # remove extraneous line breaks and spaces, remove the order: # # directive and split the sort fields into an array. # $sort_order = $Config{'sort'}; $sort_order =~ s/(\s+|\n)?,(\s+|\n)?/,/g; $sort_order =~ s/(\s+)?\n+(\s+)?//g; $sort_order =~ s/order://; @sorted_fields = split(/,/, $sort_order); # For each sorted field, if it has a value or the print blank # # fields option is turned on print the form field and value. # foreach $sorted_field (@sorted_fields) { if ($Config{'print_blank_fields'} || $Form{$sorted_field}) { print "$sorted_field: $Form{$sorted_field}

\n"; } } } # Otherwise, default to the order in which the fields were sent. # else { # For each form field, if it has a value or the print blank # # fields option is turned on print the form field and value. # foreach $field (@Field_Order) { if ($Config{'print_blank_fields'} || $Form{$field}) { print "$field: $Form{$field}

\n"; } } } print "

\n"; # Check for a Return Link and print one if found. # if ($Config{'return_link_url'} && $Config{'return_link_title'}) { print "

$Config{'return_link_title'}\n"; print "

\n"; } # Print the page footer. # print <<"(END HTML FOOTER)";

FormMail V1.6 © 1995 -1997 Matt Wright
A Free Product of Matt's Script Archive, Inc. (END HTML FOOTER) } } sub send_mail { # Localize variables used in this subroutine. # local($print_config,$key,$sort_order,$sorted_field,$env_report); # Open The Mail Program open(MAIL,"|$mailprog -t"); print MAIL "To: $Config{'recipient'}\n"; print MAIL "From: $Config{'email'} ($Config{'realname'})\n"; # Check for Message Subject if ($Config{'subject'}) { print MAIL "Subject: $Config{'subject'}\n\n" } else { print MAIL "Subject: WWW Form Submission\n\n" } print MAIL "Below is the result of your feedback form. It was submitted by\n"; print MAIL "$Config{'realname'} ($Config{'email'}) on $date\n"; print MAIL "-" x 75 . "\n\n"; if (@Print_Config) { foreach $print_config (@Print_Config) { if ($Config{$print_config}) { print MAIL "$print_config: $Config{$print_config}\n\n"; } } } # Sort alphabetically if specified: # if ($Config{'sort'} eq 'alphabetic') { foreach $field (sort keys %Form) { # If the field has a value or the print blank fields option # # is turned on, print out the form field and value. # if ($Config{'print_blank_fields'} || $Form{$field} || $Form{$field} eq '0') { print MAIL "$field: $Form{$field}\n\n"; } } } # If a sort order is specified, sort the form fields based on that. # elsif ($Config{'sort'} =~ /^order:.*,.*/) { # Remove extraneous line breaks and spaces, remove the order: # # directive and split the sort fields into an array. # $Config{'sort'} =~ s/(\s+|\n)?,(\s+|\n)?/,/g; $Config{'sort'} =~ s/(\s+)?\n+(\s+)?//g; $Config{'sort'} =~ s/order://; @sorted_fields = split(/,/, $Config{'sort'}); # For each sorted field, if it has a value or the print blank # # fields option is turned on print the form field and value. # foreach $sorted_field (@sorted_fields) { if ($Config{'print_blank_fields'} || $Form{$sorted_field} || $Form{$sorted_field} eq '0') { print MAIL "$sorted_field: $Form{$sorted_field}\n\n"; } } } # Otherwise, default to the order in which the fields were sent. # else { # For each form field, if it has a value or the print blank # # fields option is turned on print the form field and value. # foreach $field (@Field_Order) { if ($Config{'print_blank_fields'} || $Form{$field} || $Form{$field} eq '0') { print MAIL "$field: $Form{$field}\n\n"; } } } print MAIL "-" x 75 . "\n\n"; # Send any specified Environment Variables to recipient. # foreach $env_report (@Env_Report) { if ($ENV{$env_report}) { print MAIL "$env_report: $ENV{$env_report}\n"; } } close (MAIL); } sub check_email { # Initialize local email variable with input to subroutine. # $email = $_[0]; # If the e-mail address contains: # if ($email =~ /(@.*@)|(\.\.)|(@\.)|(\.@)|(^\.)/ || # the e-mail address contains an invalid syntax. Or, if the # # syntax does not match the following regular expression pattern # # it fails basic syntax verification. # $email !~ /^.+\@($$?)[a-zA-Z0-9\-\.]+\.([a-zA-Z]{2,3}|[0-9]{1,3})($$?)$/) { # Basic syntax requires: one or more characters before the @ sign, # # followed by an optional '[', then any number of letters, numbers, # # dashes or periods (valid domain/IP characters) ending in a period # # and then 2 or 3 letters (for domain suffixes) or 1 to 3 numbers # # (for IP addresses). An ending bracket is also allowed as it is # # valid syntax to have an email address like: user@[255.255.255.0] # # Return a false value, since the e-mail address did not pass valid # # syntax. # return 0; } else { # Return a true value, e-mail verification passed. # return 1; } } sub body_attributes { # Check for Background Color if ($Config{'bgcolor'}) { print " bgcolor=\"$Config{'bgcolor'}\"" } # Check for Background Image if ($Config{'background'}) { print " background=\"$Config{'background'}\"" } # Check for Link Color if ($Config{'link_color'}) { print " link=\"$Config{'link_color'}\"" } # Check for Visited Link Color if ($Config{'vlink_color'}) { print " vlink=\"$Config{'vlink_color'}\"" } # Check for Active Link Color if ($Config{'alink_color'}) { print " alink=\"$Config{'alink_color'}\"" } # Check for Body Text Color if ($Config{'text_color'}) { print " text=\"$Config{'text_color'}\"" } } sub error { # Localize variables and assign subroutine input. # local($error,@error_fields) = @_; local($host,$missing_field,$missing_field_list); if ($error eq 'bad_referer') { if ($ENV{'HTTP_REFERER'} =~ m|^https?://([\w\.]+)|i) { $host = $1; print <<"(END ERROR HTML)"; Content-type: text/html Bad Referrer - Access Denied

Bad Referrer - Access Denied

The form attempting to use FormMail resides at $ENV{'HTTP_REFERER'}, which is not allowed to access this cgi script.

If you are attempting to configure FormMail to run with this form, you need to add the following to \@referers, explained in detail in the README file.

Add '$host' to your \@referers array.

FormMail V1.6 © 1995 - 1997 Matt Wright
A Free Product of Matt's Script Archive, Inc.

(END ERROR HTML) } else { print <<"(END ERROR HTML)"; Content-type: text/html FormMail v1.6

FormMail

`Copyright 1995 - 1997 Matt Wright Version 1.6 - Released May 02, 1997 A Free Product of Matt's Script Archive, Inc.`

(END ERROR HTML) } } elsif ($error eq 'request_method') { print <<"(END ERROR HTML)"; Content-type: text/html Error: Request Method

Error: Request Method

The Request Method of the Form you submitted did not match either GET or POST. Please check the form and make sure the method= statement is in upper case and matches GET or POST.

(END ERROR HTML) } elsif ($error eq 'no_recipient') { print <<"(END ERROR HTML)"; Content-type: text/html Error: No Recipient

Error: No Recipient

No Recipient was specified in the data sent to FormMail. Please make sure you have filled in the 'recipient' form field with an e-mail address. More information on filling in recipient form fields can be found in the README file.

(END ERROR HTML) } elsif ($error eq 'missing_fields') { if ($Config{'missing_fields_redirect'}) { print "Location: $Config{'missing_fields_redirect'}\n\n"; } else { foreach $missing_field (@error_fields) { $missing_field_list .= "

$missing_field\n"; } print <<"(END ERROR HTML)"; Content-type: text/html Error: Blank Fields

Error: Blank Fields

The following fields were left blank in your submission form:

$missing_field_list
These fields must be filled in before you can successfully submit the form.

Please use your browser's back button to return to the form and try again.

(END ERROR HTML) } } exit; }

Probleme formulaire cgi

2 réponses

Discussions similaires