A voir également:
- Debian squeeze install radeon 9600
- Play store install - Télécharger - Téléchargement & Transfert
- Install microsoft store - Guide
- Amd radeon graphics jeux ✓ - Forum Carte graphique
- Please install an operating system on your hard disk - Forum Matériel & Système
- Bloatynosy install - Télécharger - Nettoyage
6 réponses
# This is a sample xorg.conf. All sections are commented out, but may
# be uncommented in order to enable them. You'll almost definitely
# need to edit the values given here to suit your own system.
#
# It is not recommended to uncomment any more than is necessary, as
# the server will choose good defaults in most cases. Thus, your
# xorg.conf should only be used to override the server when those
# defaults are incorrect for your system.
#
# For full documentation see xorg.conf(5)
# Section "Files"
# FontPath "/usr/share/fonts/X11/100dpi"
# FontPath "/usr/share/fonts/X11/75dpi"
# FontPath "/usr/share/fonts/X11/cyrillic"
# FontPath "/usr/share/fonts/X11/misc"
# FontPath "/usr/share/fonts/Type1"
# ModulePath "/usr/lib/xorg/modules"
# EndSection
# Section "ServerFlags"
# Option "DontZap" "False"
# Option "DefaultServerLayout" "Layout"
# Option "AllowMouseOpenFail" "False"
# Option "AllowEmptyInput" "True"
# Option "AutoAddDevices" "True"
# EndSection
# Section "Module"
# Load "glx"
# EndSection
# Section "Extensions"
# Option "Composite" "Enable"
# EndSection
# Section "InputDevice"
# Identifier "Keyboard"
# Driver "kbd"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# EndSection
# Section "InputDevice"
# Identifier "Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ExplorerPS/2"
# EndSection
# Section "Device"
# Identifier "Video Card"
# Driver "vesa"
# Option "AccelMethod" "EXA"
# Option "Monitor-LVDS" "Monitor1"
# Option "Monitor-VGA" "Monitor2"
# EndSection
# Section "Device"
# Identifier "Internal Graphics Card We Disable"
# Option "Ignore" "true"
# BusID "PCI:1:0:0"
# EndSection
# Section "Monitor"
# Identifier "Monitor1"
# DisplaySize 304 228
# EndSection
# Section "Monitor"
# Identifier "Monitor2"
# HorizSync 24-82
# VertRefresh 55-77
# Option "RightOf" "Monitor1"
# EndSection
doc /etc/X11/xorg.conf
# Section "Screen"
# Identifier "Screen"
# Device "Video Card"
# Monitor "Monitor"
# DefaultDepth 24
# SubSection "Display"
# Depth 24
# Virtual 3072 1200
# EndSubSection
# EndSection
# Section "ServerLayout"
# Identifier "Layout"
# Screen "Screen"
# InputDevice "Keyboard"
# InputDevice "Mouse"
# EndSection
# be uncommented in order to enable them. You'll almost definitely
# need to edit the values given here to suit your own system.
#
# It is not recommended to uncomment any more than is necessary, as
# the server will choose good defaults in most cases. Thus, your
# xorg.conf should only be used to override the server when those
# defaults are incorrect for your system.
#
# For full documentation see xorg.conf(5)
# Section "Files"
# FontPath "/usr/share/fonts/X11/100dpi"
# FontPath "/usr/share/fonts/X11/75dpi"
# FontPath "/usr/share/fonts/X11/cyrillic"
# FontPath "/usr/share/fonts/X11/misc"
# FontPath "/usr/share/fonts/Type1"
# ModulePath "/usr/lib/xorg/modules"
# EndSection
# Section "ServerFlags"
# Option "DontZap" "False"
# Option "DefaultServerLayout" "Layout"
# Option "AllowMouseOpenFail" "False"
# Option "AllowEmptyInput" "True"
# Option "AutoAddDevices" "True"
# EndSection
# Section "Module"
# Load "glx"
# EndSection
# Section "Extensions"
# Option "Composite" "Enable"
# EndSection
# Section "InputDevice"
# Identifier "Keyboard"
# Driver "kbd"
# Option "CoreKeyboard"
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# EndSection
# Section "InputDevice"
# Identifier "Mouse"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/input/mice"
# Option "Protocol" "ExplorerPS/2"
# EndSection
# Section "Device"
# Identifier "Video Card"
# Driver "vesa"
# Option "AccelMethod" "EXA"
# Option "Monitor-LVDS" "Monitor1"
# Option "Monitor-VGA" "Monitor2"
# EndSection
# Section "Device"
# Identifier "Internal Graphics Card We Disable"
# Option "Ignore" "true"
# BusID "PCI:1:0:0"
# EndSection
# Section "Monitor"
# Identifier "Monitor1"
# DisplaySize 304 228
# EndSection
# Section "Monitor"
# Identifier "Monitor2"
# HorizSync 24-82
# VertRefresh 55-77
# Option "RightOf" "Monitor1"
# EndSection
doc /etc/X11/xorg.conf
# Section "Screen"
# Identifier "Screen"
# Device "Video Card"
# Monitor "Monitor"
# DefaultDepth 24
# SubSection "Display"
# Depth 24
# Virtual 3072 1200
# EndSubSection
# EndSection
# Section "ServerLayout"
# Identifier "Layout"
# Screen "Screen"
# InputDevice "Keyboard"
# InputDevice "Mouse"
# EndSection
j'ai donc besoin de personnaliser mon xorg.conf
j'essaye un nouveau : #aticonfig --initial mais toujours le même problème
aticonfig: No supported adapters detected
j'esssaye de reconfigurer xorg pour changer ça configuration avec la commande :
#dpkg-reconfigure x-server-xorg
(il me pose meme pas les qustions de configuration)
alors je me demande comment faire
j'essaye un nouveau : #aticonfig --initial mais toujours le même problème
aticonfig: No supported adapters detected
j'esssaye de reconfigurer xorg pour changer ça configuration avec la commande :
#dpkg-reconfigure x-server-xorg
(il me pose meme pas les qustions de configuration)
alors je me demande comment faire
après une recherche j'ai modifier mon xorg.conf par ceci :
(https://forums.commentcamarche.net/forum/affich-14452745-debian-installer-carte-ati-bug
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
(https://forums.commentcamarche.net/forum/affich-14452745-debian-installer-carte-ati-bug
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
après re-démarrage du pc :
xdm ne se lance pas
j'essaye de lancer un startx et il me sort une erreur
alors je supprime /etc/X11/xorg.conf :
#rm /etc/X11/xorg.conf
#startx
(la j'arrive sur l'interface graphique.
je ressaye : #ati-config --initial
et il reconnait toujours pas ma carte graphique
je recgarde erreurs du fichier de log de xorg
#cat /var/log/Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) open /dev/fb0: No such file or directory
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
(EE) GLX error: Can not get required symbols.
je regarde si la version de ma carte graphique est supporté par les drivers
#cat /var/log/Xorg.0.log | grep 9600
(--) PCI:*(0:1:0:0) 1002:4150:174b:0200 ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xd0000000/268435456, 0xfdff0000/65536, I/O @ 0x00009c00/256, BIOS @ 0x????????/131072
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
(--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
/je regarde la détection :
# lspci |grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
actellement je cherche la solution
xdm ne se lance pas
j'essaye de lancer un startx et il me sort une erreur
alors je supprime /etc/X11/xorg.conf :
#rm /etc/X11/xorg.conf
#startx
(la j'arrive sur l'interface graphique.
je ressaye : #ati-config --initial
et il reconnait toujours pas ma carte graphique
je recgarde erreurs du fichier de log de xorg
#cat /var/log/Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) open /dev/fb0: No such file or directory
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
(EE) GLX error: Can not get required symbols.
je regarde si la version de ma carte graphique est supporté par les drivers
#cat /var/log/Xorg.0.log | grep 9600
(--) PCI:*(0:1:0:0) 1002:4150:174b:0200 ATI Technologies Inc RV350 AP [Radeon 9600] rev 0, Mem @ 0xd0000000/268435456, 0xfdff0000/65536, I/O @ 0x00009c00/256, BIOS @ 0x????????/131072
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
(--) RADEON(0): Chipset: "ATI Radeon 9600 AP (AGP)" (ChipID = 0x4150)
/je regarde la détection :
# lspci |grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
actellement je cherche la solution
Vous n’avez pas trouvé la réponse que vous recherchez ?
Posez votre question