Probléme graveur externe

george -  
 Utilisateur anonyme -
Bonjour tous le monde

voici mon problème; j'ai un graveur externe de marque NEC DVD_RW ND-4550A qui me pose des problèmes de gravures sur DVD-R ( pas de problème pour graver des CD en revanche )

je c/c le log d'erreur aussi pour eviter les postes inutile ma mémoire vive est purger avant chaque gravage et mon Hdd a été défragmenter il y'a de cela a peine une semaine


Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 20:18:06
Version de Nero : 6.3.1.18 (Nero Express)
Graveur : <_NEC DVD_RW ND-4550A> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
Pilote d'adaptateur :<> HA 2
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM : <QSI DVDRW SDW-041 >Version: DX35 - HA 1 TA 0 - 6.3.1.18
Pilote d'adaptateur :<atapi> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI DVDRW SDW-041 atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
QSI DVDRW SDW-041 D: CDRom0
_NEC DVD_RW ND-4550A E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 70254592 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 479MB (490992kB)
Free physical memory: 136MB (140008kB)
Memory in use : 71 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

25.8.2009
Compilation ISO
13:36:49 #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

13:36:49 #2 Text 0 File Reader.cpp, Line 118
Reader running

13:36:49 #3 Text 0 File Writer.cpp, Line 124
Writer _NEC DVD_RW ND-4550A running

13:36:49 #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

13:36:49 #5 Text 0 File Burncd.cpp, Line 3172
Turn on Disque entier, using DVD media

13:36:50 #6 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2059535 (457:40.35, 4022MB)

13:36:50 #7 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD)

13:36:50 #8 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: _NEC DVD_RW ND-4550A, Media type: DVD-R
Disc Manufacturer: PRINCO - RGM1
Disc Application Code: 64, Disc Physical Code: 193

13:36:50 #9 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:36:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2059536 (2059536) = #2059536/457:40.36
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2059536 blocks [_NEC DVD_RW ND-4550A ]
--------------------------------------------------------------

13:36:50 #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [_NEC DVD_RW ND-4550A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4217929728, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2059536 | lead-out | 1 | 0x00 | 0x41

13:36:50 #12 Phase 24 File dlgbrnst.cpp, Line 1845
Début de mise en cache des fichiers

13:36:50 #13 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.

13:36:50 #14 Phase 25 File dlgbrnst.cpp, Line 1845
Cache des fichiers terminé

13:36:50 #15 Phase 36 File dlgbrnst.cpp, Line 1845
Début de gravure à 4x (5 540 Ko/s)

13:36:50 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:36:50 #17 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 12:48,477 (768477ms) -> OK

13:36:50 #18 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode for Multisession

13:36:50 #19 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON

13:36:50 #20 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: No

13:36:50 #21 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:39:20 #22 SCSI -1093 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0A8E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x55 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

13:39:20 #23 CDR -1093 File Writer.cpp, Line 304
Recherche incomplète

13:39:20 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

13:39:20 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

13:39:20 #26 Text 0 File DVDR.cpp, Line 2304
EndDAO: Last written address was 21951

13:39:20 #27 Phase 133 File dlgbrnst.cpp, Line 1845
Écriture de clôture rapide

13:39:54 #28 SCSI -1176 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x00

13:40:43 #29 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

13:40:43 #30 CDR -1176 File WriterStatus.cpp, Line 164
Erreur fixation session
_NEC DVD_RW ND-4550A\H2 T0

13:40:43 #31 TRANSFER -24 File WriterStatus.cpp, Line 164
Impossible d'effectuer la fonction Disc At Once

13:40:43 #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK

13:40:43 #33 Phase 38 File dlgbrnst.cpp, Line 1845
La gravure a échoué à 4x (5 540 Ko/s)


Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 22:07:32
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 08/03/2007 01:51:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 26/06/2007 17:59:52 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 0, size=91136 bytes, created 04/06/2004 13:36:50 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 0, size=28544 bytes, created 04/06/2004 13:37:30 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 0, size=5760 bytes, created 04/06/2004 13:40:42 (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.1133 (xpsp2.020921-0842), size=87040 bytes, created 16/10/2002 17:31:10 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
A voir également:

1 réponse

Utilisateur anonyme
 
Bonjour.
Je suis étonné que quelqu'un sachant nous donner autant d'informations n'ait pas résolu son problème.
Je ne peux hélas être utile bon courage.
0