Samsung LE40M86BDX/XE LCD Powering Issue Solved/Closed

Question

Hello,

I own a Samsung LCD TV model LE40M86BDX/XEC.

Normally, when turned on, the red LED blinks 4 or 5 times, a small sound occurs, and then it turns on.

For a few days now, when trying to turn it on, the LED blinks at least ten times along with the small sound

which is not normal.

What problem could this be, and what do you suggest doing?

Best regards.

Configuration: Windows Vista Firefox 3.5

lefab · Accepted Answer

Indeed... it was the 4 dead capacitors. I put in 1000 µF 25V (the originals were 10V)... and it's all good. Repaired.

The image of the board with the 4 dead capacitors (as they are bulging on top) is in the top right: http://photomaniak.com/upload/out.php/i1041202_DSC04799.JPG

adil-evil · Answer

Here you go http://www.samsung.com/fr/support/faqs/supportFaqList.do?group=&group_cd=&type=télévisions&type_cd=02010000&subtype=tvlcd&subtype_cd=02010100&model_nm=LE40M86BD&dType=D&mType=&model_cd=&menu=faqs&prd_ia_cd=02010100&disp_nm=LE40M86BD you'd better contact Mr. Samsung in person otherwise I will try to download the user guide and keep you posted -- no more help needed :/ please check Resolved if a question is.

meharifred · Answer

Hello
I have the same screen as you, and exactly the same problem, the LED blinks up to 20 times before the screen turns on, accompanied by a clicking noise, and the screen turns on by itself at night, it's ridiculous... lol
I'm laughing but I'm really frustrated, the screen is only 1 year old
The repairman is coming this Monday, we'll see,
I'll keep you updated.

lulutte91 · Answer

Hello,

I had the same problem with my TV 2.5 years out of warranty, the authorized Samsung repairman told me it would cost 400 € to replace the power supply board and the main board.

So, I disassembled the TV to see what was inside, and surprise, it's just a simple PC. I checked the references of the different boards to see if I could find them cheaper online, because changing them isn't harder than replacing a graphics card.

Then, oh surprise, I typed in the reference and realized that many people have the same problem with this TV, it's crazy. However, I found the solution online, and for 8 euros, it turns out four capacitors had burned out (I suspect a design flaw in the board), and now it’s working again like it did back in the day. Instead of 400 euros for repairs, just 8 euros! Phew, I’m glad I didn’t trust those after-sales service thieves.

Best regards.

meharifred · Answer

Hello the Samsung repairman came this week the verdict: problem with the motherboard, four capacitors have burned out (they have swollen) according to the repairman from Samsung, it's a known issue for this TV model, cool but they won't do anything..... luckily for me still under warranty, because my TNT tuner failed after reassembling everything. Changed under warranty the day before yesterday. For those who have the same problem and whose TV is no longer under warranty, try writing to Samsung for some assistance. greetings to all

lesage · Answer

Simply put, you need to change a few capacitors at the secondary level of the power supply. In general, these capacitors are swollen. You just need to explain to the technician what he needs to change. He won't exaggerate the price (around 50 euros), and the friend who said the TNT malfunctioned is a very rare case. I work in electronics.

rcdl · Answer

Hello Lulutte91,  I have the same problem. The TV keeps turning on, but for how long? Could you give me the reference for the power board as well as the capacitors that you changed?  Thank you.

lulutte91 · Answer

Hello,  I welcome you to the Samsung TV club that won't turn on. If you are under warranty, please contact Samsung; otherwise, read the forum for the answers inside.  Best regards

lulutte91 · Answer

Hello,  the model matters, but the problem is identical to the others. I think it needs to be disassembled to take a look. The power supply board is certainly the same. Carefully check each capacitor to see if one or more are burnt out. Otherwise, note the reference and search online; there may be a specific issue with this reference. Good luck!

megane93 · Answer

Ok, thanks, I'll take a look at it and keep you updated if it worked. Thanks anyway.

moggy13 · Answer

Hello, I have the same ignition problem with my Samsung LCD TV LE40S86BDX. It is no longer under warranty. I have therefore bought the capacitors. But I saw on a forum that they need to be soldered onto the power board. Can someone tell me how to do this soldering and with what tools? I have never opened a television and I'm afraid of making a mistake. Thank you in advance.

jeff · Answer

Good evening,  I have also been a victim for 3 weeks of a defect in my 102cm Samsung LCD, whose warranty has just expired :( I would like to know how to access the power board in order to change the 4 capacitors? Do I need to completely remove the back cover? Does the board unclip through the side hatch? Is there any special procedure for the capacitors?  Thank you in advance for your information.

Puig · Answer

For us, it's sorted out. My husband changed the 4 capacitors and the TV restarted like before. He took off the back cover and removed the power board. At first, there was a little scare because it didn't work on the first try; there was a small leak that caused a poor connection, but after checking, everything was fine. I'm still waiting for a response from Samsung's customer service regarding my letter; they're a bit pathetic this time. But thanks for the advice; we saved quite a bit on repairs as a result.

jeff · Answer

Hello,

I also fixed the problem :) my LCD LE40M86M... is turning on normally again

I went on YouTube and there are some videos floating around... that gave me confidence

I spent 2.80 euros on capacitors (4 capacitors 1000µf 10v 105° as mentioned above)

1) remove the cover
2) disconnect all the cables (small photo beforehand to locate everything)
3) unscrew the power board (it's in the center of the TV, you can't miss it)
4) desolder the 4 components while keeping track of the polarity beforehand; at first, I used my 18-watt soldering iron that I use for modding Wiis, but it didn't get hot enough and the solder wouldn't melt, so I pulled out my soldering station and set the iron to 450°, and it was perfect.
5) re-solder everything and test before putting the cover back on
6) tell yourself that you've saved a lot and that these LCDs are really crap, paid almost 1400 euros 2 years and 1 month ago and broke down 1 week after the warranty expired, with an unreachable customer service by phone :(

good luck to everyone

bérélia · Answer

Hello, a week ago, I had the same problem. I simply changed the batteries in the remote control. In any case, it worked for me. If this can help, that's great.

MARCAZIM · Answer

Hello  like all of you, I have the same problem however, I have in my stock some capacitors at 25V 1000μF 105°C do you think that could work best regards dav

Puig · Answer

At our place, it worked with 16 V in 25, I don't know...

stephone · Answer

Hello,  Three days ago... SAMSUNG LCD screen L40xxxxx The screen seems to want to turn on, then makes a noise (buzzing) and stops, then starts again a few seconds later.  After your messages; I opened the cover and 2 capacitors are bulging, however, mine are 2000 uF 10V 105°...  I am waiting for the delivery of the capacitors ordered online for today... I will keep you updated on the progress as soon as I reassemble it.  For your information, it's out of warranty for 3 months :(  Merry Christmas to everyone, hoping to have a TV for my children tonight :(

Vida13 · Answer

Hello everyone!
I have the same problem as everyone, my Samsung LCD TV model LE40R73BDX/XEF takes too long to turn on (between 2 and 5 minutes) and beeps during that time!
I have removed the back cover, I have visualized the power board but I can't see where the capacitors are in all this mess!

Could someone provide me with the references of these capacitors listed on the power board!

Thanks in advance!

Happy holidays to all

And long live 2010 with Samsung!

LANLAUDE · Answer

Thank you, the super professionals of the net. Thanks to you, I fixed my LCD by changing the 4 capacitors. So strong!

Maxazimut · Answer

Like all of you, I have the same problem with my Samsung LCD TV LE40RBDX bought in September 2007 from Cdiscount. I opened my TV and found 3 bulged and burnt capacitors (it even burned a mat). I found the 10V 1000mF 105° capacitors in a shop in the 11th district of Paris called ECE. Here is their site as well: http://ibcfrance.fr/ it's €0.35 each. I'm going to solder that tomorrow and I will keep you updated if it works and I will make a little tutorial for those who are in the same trouble as us. Cheers and Happy New Year 2010.

Maxazimut · Answer

Well, I'm back, but without a tutorial, because I resoldered the 4 capacitors of 10V 1000µF 105°C (of the same brand), and it doesn't work. I will try to change the others with different specifications or I will try to switch from 10V to 16V. See you next year.

jbr60 · Answer

Hello and happy new year 2010 to everyone.  I have the same power-on issue and swollen capacitors that I just ordered. I also have an image problem; in cinema mode, the image is completely solarized, see example.  1° image in standard http://www.zimagez.com/miniature/dscn14207.jpg 2° image in cinema mode http://www.zimagez.com/miniature/dscn142111.jpg  What do you think?  jbr60

jbr60 · Answer

Re,
I've started tinkering:

here on the left of the photo is a swollen capacitor
http://www.zimagez.com/zimage/dscn14285.php

here is the location of the capacitors on the board
http://www.zimagez.com/zimage/dscn14264.php

be careful with the polarization when remounting the capacitors!

Maxazimut · Answer

I had the same problem as you regarding the image before the breakdown, I thought it was due to the TNT so I "reset" the TV, it worked for a week and then it wouldn't turn on anymore, I still haven't found the issue even after changing the capacitors. A+

jbr60 · Answer

Hello Maxazimut,  For me, the TV still turned on (but with difficulty) and was working somewhat. I decided to open it because of this image problem, and that's when I found three swollen capacitors. I should have them in 1 or 2 days. I will update you.  Regarding the image, I carefully observed everything and found on a connector (which connects at the top center of the screen) two wires that were almost disconnected from the connector. The wires were very tight; in fact, there is glue holding them, and I think that it heats up in the area and thus softens the plastic connector.  http://www.zimagez.com/zimage/dscn14308.php  In the image, there are two wires completely on the right, one white and one blue, and you could really see the terminals that were disconnected. I pushed them back in securely. To be continued. I will keep you updated as soon as I turn it back on.  jbr60

Fredo13200 · Answer

Good evening and Happy New Year to everyone  I want to thank all the people who contributed on the forum because it helped me fix my LCD TV.  For my part, only 3 capacitors were out.  Just so you know, I bought a set of 10 capacitors for 5€ on eBay.  However, if the failure occurs again, I think I will use 16v ones instead of the original 10v.  Bye.

jbr60 · Answer

Hello,  I just changed my capacitors and the power-up went well.  As for my image problem, it remains unchanged. So we'll continue to look for a solution.  TV set to standard mode (the picture is blurry, but the image is fine) http://www.zimagez.com/zimage/dscn14208.php  TV set to cinema mode (here you can't see anything, so no worries) http://www.zimagez.com/zimage/dscn142112.php  For your information, it's the same image paused.  @+ jbr60  For eBay, I think we have the same supplier: https://www.ebay.fr/itm/200411250944?ViewItem=&item=200411250944&ssPageName=STRK:MEWNX:IT

chris · Answer

Honestly, thank you guys!!! We're not DIYers at all, but thanks to your explanations we managed to repair our TV for only 3 euros.... Many bought this TV at the same time and the same problem keeps happening.... They must have put together a batch of defective capacitors.... and it’s seriously easy to fix!!!! Don't hesitate!!!! And the higher the voltage, the better it is!!!! Amazing, thanks again to those who took the time!!!!

Maxazimut · Answer

Hello, JBR60, as I was saying, I've had the same image problem and I'm afraid it might be another component that has burnt out which is why my TV won't turn on. But I believe that only the LE40R86BD/BDX models have this image issue, I'm not sure if it's due to the power supply or something else. Try this method to fix your image problem. Turn off the TV and then quickly press info, menu, mute, and power in sequence on the remote. The configuration screen should appear and you reset the TV, it will reinstall the channels and the problem should disappear, it worked for me. But a week later, no TV again. Let me know if this method has changed your image. Catch you later!

Ballow21 · Answer

Hello everyone and THANK YOU for these tips.  I changed the 4 capacitors (I put in 16V ones) and despite that, my TV still has the same problem. It turns on, and after 5 minutes, the screen goes black (but I still have sound). Have you found a solution? Thank you.

boubou83190 · Answer

Thank you !!  I also had my 4 capacitors replaced, the guy told me that I needed to use some heavier ones because the originals are a bit light. However, my PS3 console no longer works with HDMI, so is this problem related.......

bidouill33 · Answer

I have the same problem but with an UE46B6000 LED. It's really frustrating because it’s only been 1.5 months.  I’m going to call Samsung right away because this is really not normal for a brand new TV. I hope we can remove the power supply from behind the TV since the cable goes through the wall insulation.  See you!

Luculus · Answer

Same ignition problem with my LE40M86BD TV from October 2007. Read the forum, called Samsung (email and phone), but they don’t want to hear anything about a TV that's been out of warranty for 3 months. I have a Blu-ray player, an audio-video receiver, 2 printers, and even a Samsung microwave, but nothing to do with those idiots! Big thanks, thanks to you I repaired the TV myself, the 4 famous 1000 µf capacitors were indeed defective. For me, Samsung is done.

arrakis · Answer

I have a Samsung LE40R74BD bought 3 years ago with the same symptom. After turning it on, the relay clicks every second and there's no picture. click... click click... click  I changed the 4 faulty capacitors and it worked again.  Thank you very much.  For those in Paris, there’s a shop called Saint Quentin Radio, 6 r St Quentin, 75010 PARIS.  I'm not trying to advertise, but even these kinds of shops were common about ten years ago, and now there are very few left.

bibouille · Answer

A very big thank you to all of you, I repaired my screen for only 10 euros (capacitor + assembly) instead of much more at Samsung, thank youuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuu!

delphdaux · Answer

Same as the previous message. Following your advice, my husband went to Malakoff to buy the components. A quick soldering job, and after being without a TV for 3 days, it's working again! Thank you for the savings made!

abde · Answer

Hi, I also have the same problem with the power supply and the picture on my TV LE40R86BDX. Yesterday I changed the 4 capacitors, I tried but at first it didn't work, but this morning it's perfect, it turns on the first time. However, the picture is still bad and I have the issue with the TNT, and I no longer have access to DTV or DMENU. I don't know if it's the same for you? Thank you all, you really helped me with the first repair.

manu2612 · Answer

Hello everyone,My TV (LE40M87BDX) has also been experiencing the same startup issue for a few days.It’s 3 years old, so it’s out of warranty. I’ve decided to try to repair it myself.However, I have a few questions to ask before I start soldering:_ My 4 capacitors are all bulging, I’m thinking of replacing them with 16v ones, but aren’t the 16v ones bigger than the 10v? Do you recommend a special brand? They need to have the same specifications as the original ones except for the voltage (1000 µf, etc...)_ Does increasing the voltage damage the HDMI ports (like with boubou83190 and his play3)?_ I assume the difference in length between the two legs indicates the polarity of the capacitor. Which way should I install it? Which leg represents the +? And which one the -?_ I’m not very skilled at soldering. So, I need a soldering iron and solder? Also, if I let a bit of solder flow onto the board and the printed circuits, could it cause damage?Thanks in advance for your help. Thanks also to everyone who has already shared their experience; it has been really helpful! ;)

Electribe · Answer

If you want to turn on your screen despite this problem, heat your TV with a hairdryer through the back vents!! In 1 minute it will turn on!! I've had the same problem twice; I need to replace my capacitors, but in the meantime, this trick works well!! I found it out myself because I leave my screen on since it wouldn't turn on anymore, and after a power outage, here I am without a TV!! And since it always turns on when warm, I thought I'd heat it up, and there you go!! I hope this helps some people!!

manu2612 · Answer

Thank you electribe for your tip. I hadn't thought of that, but it's true that the TV turns back on immediately when it's still warm. But it can't be anything but temporary because I can't imagine heating it with a hairdryer for too long!! :) I will buy capacitors from www.conrad.fr but I'm waiting for some opinions and answers to my questions before doing so.  edit: do you have any online component sales addresses please? On www.conrad.fr it's impossible to pay by credit card and the shipping costs are €12 for less than €15 of purchase. Thank you

ludu2 · Answer

Thank you!!!!! For me, it was three condos on my Samsung le40f86bd, so a repair for €0.90, isn’t life beautiful!!! For those who might hesitate, there is nothing simpler to do.

freeva · Answer

Hello and thanks to everyone,  I also own a Samsung LCD LE40M86BDX purchased on 02/23/08, so it's been out of warranty for 2 months!!!  I have the same symptoms as you since yesterday, blinking red LED, click click click noises, and very long start-up when cold.  Your experience helped me save on a costly service call since our dear technicians apparently prefer to replace the entire power supply board.  After reading your posts, I took off the back cover and saw: 2 capacitors on the power supply board are bulging.  Not wanting to be without TV while waiting for the parts to arrive, I called an electronics component store in Nice to ask if they had the caps in stock (2200 Uf 10V 105°) and, yes they do but in 16V, that's fine, still good. I also asked if they do soldering? "Bring the board and we'll see!"  I went to the store with the board under my arm, in 5 minutes my 2 new capacitors were soldered onto the board for a total of €8.  Back home and reassembling.... Miracle, it works!!!  Info for Nice residents, the store is COMPOSANTS DIFFUSIONS, quick and efficient, professional indeed!  Thanks again.

manu2612 · Answer

I finally started soldering the 4 capacitors yesterday. I had never soldered before, and it went very well. For the polarity, it's marked on the side of the capacitor, and I just had to put them in the same direction as the others or it's marked on the board. It cost me less than 3€!! Thanks everyone for your experiences!!!

guyclaude · Answer

Hello everyone, On a LE 40M86 LCD TV. For a few days now I have the same power-on issue and taking advantage of your various advice I want to get started My concern is in removing the back cover, fearing to remove a screw that secures an internal component!!!! Any advice from someone who has already done the operation  I have spotted and removed 1 screw in the middle at the top 3 screws on the right side 3 screws on the left side 6 screws at the bottom 1 screw approximately in the middle of the panel Apparently that doesn't seem enough There are still 4 screws marked S around the base of the stand and 1 screw on the left side of the connection panel marked with a white arrow above.  Should I remove everything? Thank you

manu2612 · Answer

Hello guyclaude, Yes, you need to remove all of them to take off the back panel. The ones around the base are used to hold the television's base in place. As for the other screw you're talking about, I'm not sure which one it is. However, I reassembled my TV the day before yesterday. You can remove them all without worry. Good luck ;)

guyclaude · Answer

Hi Manu,Thank you very much first of all, the unidentified screw is on the left in the area at the bottom right where the peritel, antenna, etc. are located... Just a supplement, if the other 4 screws hold the base, does that mean I have to lay the TV down and can't just leave it on its stand and remove the cover?

manu2612 · Answer

Oh yes, it's the screw next to the SCART connectors. I removed it without thinking that it could cause problems (and there weren't any ^^). Before unscrewing everything, I laid my TV flat, screen against my table for more stability and safety (that's what I recommend you do, just in case). I realized after unscrewing them that the 4 screws held the stand. After that, you'll need to unscrew the plate with the components (4 or 6 screws, I don't remember). Here's a site with explicit photos of the plate and the capacitors in question; I can't remember if I posted the link here or on another forum https://techreport.com/forums/viewtopic.php?f=37&t=62360&st=0&sk=t&sd=a&sid=92e27d27231bf864ba34c6ca6eda6f7d#p923843  If you need any more advice, feel free to ask ;)

guyclaude · Answer

OK everything is disassembled and labeled, I just have to wait for tomorrow for the electronics store to open. For your information, the screw next to the Peritel sockets also needs to be removed. Thanks again.

guyclaude · Answer

Cynthia, You are in the right place. If you look into this topic, you will understand where it comes from and have the solution to fix it, if you can, just like I just did successfully. Otherwise, if your TV is no longer under warranty, you'll need to find a good repairman knowing that there are capacitors to change for less than 5 euros, and let's say about an hour of work in total.

choco69 · Answer

Hello, I changed the capacitors but the same problem persists:   - the TV takes time to turn on  - vertical color lines appear. What should I do?????  a solution please, quickly.

Sams · Answer

Same problem with my Samsung LCD LE40M86BDX/XE and indeed, upon opening my TV, I found that 4 electrolytic capacitors (radial) of 1000 mf 10V on the power board were defective (swollen). I headed to a small electronics store in Paris 12th, 4 capacitors for 2.40 euros. I replaced them and my TV works perfectly. So thank you for the solution posted on this forum. Best regards.

arez92 · Answer

Hello,    I would also like to change my capacitors, but what type of soldering iron should I use? What solder should I choose? Thank you for your responses.

johndu17 · Answer

Hello everyone I’m just here to share my experience and thank the contributors of this forum. Indeed, I was able to fix my TV that had a long startup time by replacing two 2200 uf 10 volt 105 degrees capacitors. It cost me 1.90 euros and 10 minutes of soldering. For the method, you need to unscrew all the screws on the back of the TV then locate the board where the TV's power supply is connected disconnect the connectors and remove the 6 screws that secure the board. Identify the bulging connectors, even slightly, and replace them.   NB: Make sure to note the polarities and solder them back in the same direction. Generally, the polarities are marked on the power supply board on the back. On the capacitor, the - terminal is marked by a stripe.

rolland · Answer

Hello everyone  Thank you for your valuable advice. I have a Samsung LE46F86BDS (1890 € after all) that has been out of warranty since March 2010, and thanks to all your tips, I resolved the power-on and clicking issue by replacing the two capacitors. It's great that forums like this exist. I also received help from the BH Electronique store in Bagneux (92) on the RN20, who showed me the procedure. I am still waiting for a response from Samsung...

Karls2 · Answer

+1 for the repair of 3 capacitors 1000 micro 10v 105° changed following your advice and my LCD LE40M86BD which kept clicking on startup is back up and running!  Thank you very much!

inconnu · Answer

I have the same problem; could you please help me?

selim · Answer

Thank you very much guys, it cost me €18 because I don’t have a soldering iron! I retrieved the power card, I went to a repairman/component seller, and he changed the swollen capacitors! It’s great, long live this forum and to cçm!

BEN · Answer

Hello, I have exactly the same problem.

Ublicus · Answer

Hello,

A big thank you to this forum that helped me fix my Samsung television. Now it works really, really well.

My television: Samsung LE46M86BDX/XEC

As for me, I had to change 3 capacitors. Here is the reference of the capacitors I bought:
Brand KSC, 1000 µF, 105°C, 25 V (25 Volt works great)

Thanks again,
Bye

CONI02100 · Answer

Hello, I also have the same issue recently, except that the screen doesn’t turn on at all!!

leon68 · Answer

Same problem as you all and ... the same solution: 4 swollen capacitors, so they were replaced and there, the miracle, it works!!! Easy to do. My novice advice: use a sufficiently powerful soldering iron (mine was a bit underpowered, I struggled); it's best to have two people: one holding the board while the other desolders and solders. Thank you and well done for this site. Red card to SAMSUNG!!! They could gain so much in terms of image by intervening rather than playing the aloof. I hesitated (or rather I was hesitating) between a SONY NX 800 and a SAMSUNG UE C8700...

christ · Answer

Big problem for you, this is the second time I've had this breakdown, luckily I took the warranty extension because the board needs to be replaced, which is expensive if you don't have warranty.

marie63 · Answer

Hello, I have the same issue, my TV won't turn on when I ask it, however, the sound comes on and the red light flashes. It turns on hours later during the night often, and of course, we get up to turn it off, and when the kids want to turn it on in the morning, it starts again, it won't turn on.Can you help me too, please?Thank you in advance.

mamar · Answer

Same problem with my LE40M..... warranty expired three months ago. Dismantling the power supply board, finding a nice electronics technician in the directory who sells the capacitors. For me, 2 capacitors 2200µf 105° 10V and he replaces them for me. 0.20€ each plus a nice tip for the technician. Thanks Samsung and some TV repairers who ask for 400€ for the repair, we're not cash cows!! Next TV will be something other than Samsung.

smamar90 · Answer

It works! Same breakdown, and on top of that the seller changed them for me, he didn't want me to pay him, big tip for him.

djebel · Answer

The problem is the primary power supply and the noise is the relay.

alexka57 · Answer

Hello everyone!

I am new to this forum, and I am also facing a problem with turning on my SAMSUNG LCD screen, model LE40R87BD (yes, that's one more!). I bought this TV in April 2008, and therefore it has been out of warranty for 4 months (since I didn't take an extended warranty!). By browsing this discussion forum, I realized that my problem is not an isolated case. Indeed, my TV also makes that famous "click-click" sound, as if it is continuously turning on and off, so my TV doesn't even have time to display an image or have sound! I am actually forced to unplug my TV from the wall socket for it to stop making that "click-click". I opened the device's cover and inspected the power board; and indeed I found that 2 capacitors of type 2200µF 10V 105°C were dead (bulging). I then removed the power board and replaced my 2 faulty capacitors with 2200µF 16V 105°C (not the 10V ones as originally, as the 16V would be more robust according to many users who have intervened on this forum). However, my concern now is that despite replacing these defective capacitors, my TV unfortunately still doesn't work!!!! This "click-click" problem persists (but at slightly more spaced intervals), and I obviously still have no sound or image!! Could anyone please help me???? Should I have also replaced other capacitors even if they appeared intact, or could the problem lie elsewhere??
In any case, it's very frustrating when a LCD TV worth about 1000 euros fails after just 2 years and 4 months, and on top of that, it's no longer under warranty!! Like all of you, I would like to be able to repair my TV myself without breaking the bank!!!!
Thank you in advance for your suggestions and help!!!!

alexka57 · Answer

Hello everyone,  Just to let you know, I ended up replacing all the starting capacitors on the power board of my Samsung LCD TV model LE40R87BDX, even though only 2 were bulging. However, to this day, my TV still doesn't work, as the infamous "click-click" problem persists; in fact, my TV keeps turning on and then going into standby continuously as soon as it is plugged into the mains... Consequently, I still have no sound or picture (obviously!) Furthermore, I would like to remind you that my TV is no longer under warranty, as I purchased it about 2 years and 4 months ago (April 2008).  Thank you in advance for your help, as I really need it...  Best regards.

roro · Answer

Hello, does anyone have photos to help me change the famous capacitors!! I'm a little afraid to mess up.. Thanks in advance

jcb93 · Answer

Hello everyone and thank you to "how it works".

My SAMSUNG LE40M87BD television didn't turn on anymore: "blinking standby". At first, it started after 5 minutes, then after a week it took a good 15 minutes. And last Sunday nothing at all = just the "blinking standby" with the characteristic incessant "tictic" sound.

I quickly found this discussion. I disassembled my television and found three slightly swollen capacitors on top. All of the same type = radial electrolytic capacitor 10V 1000µ 105°C.

I replaced them with 25V 1000µ 105°C capacitors and since then = my television works like new.

I know absolutely nothing about electronics. I didn't know how to solder. The repair took me 30 to 40 minutes and cost 11.09 euros = 9.20 euros for the soldering kit (a soldering iron, a stand, solder, and a desoldering pump) and 3 capacitors at 0.63 euros each... All that at ECE, 66 rue de Montreuil in Paris in the 12th (metro line 9 station rue des boulets).

dream10 · Answer

Good evening, my power supply board for my Samsung LE46F86BD screen has burned out where can I find one? Would it be possible to see a picture of the power supply board from the LE40M86BD to know if I can buy this screen for its board thank you

hyppo · Answer

Hello everyone  As for me, I have a Samsung LE32R73BD bought in January 2007. And I have the same problem that occurred tonight: the TV won't turn on and the LED keeps blinking continuously. While researching online, I came across this topic and decided to open it up. The power board is somewhat different but the same components can be found... but what makes me skeptical is that my capacitors don’t seem to be blown (they're not bulging or anything...) and also the TV makes no clicking sound when I try to turn it on. Until today, I had never had any issues with the TV when turning it on.  Would any of you have an idea about the problem?  Thank you in advance.

sarra · Answer

Hello, I too have the ignition problem; it seems to be coming from the power supply board, and the warranty has indeed expired since June 2010. Invoice amount:  224.00 euros  what a scam, the price of the TV was 849 euros! ! !

FerAsouder · Answer

Hello, Same ignition problem with this television model. After replacing the 2 capacitors of 2200µF/10V (the top face bulged) with 2200µF/16V, everything is back to normal. These 2 new capacitors are a bit larger than the original ones, but the spacing of the legs is the same and the space to fit them is sufficient. Thank you for all your information.

fred · Answer

Hello I have the same problem with the same TV. I found on other forums that I need to replace 4 capacitors that are bulging. I just opened it up and indeed I found the CS806, CM817, CM811, and CM812 bulging. I will order them from Radiospares and I will share the results.

jer13 · Answer

For my part, I changed the capacitors; however, the service program was probably out of order, certainly the EPROM. After some changes in menu 2 and 8, the TV is working perfectly again.

speyzz · Answer

Hello,  I had the same problem with my SAMSUNG LCD screen not turning on. After several attempts with TV repairmen who were asking for at least 400 euros!!! what a rip-off!!! I decided to disassemble my screen following everyone's recommendations and there it was, bingo!! the 4 faulty capacitors (bulging) I didn't know how to solder or unsolder so I reached out to TV repairmen again and despite a relatively reliable diagnosis and the board being disassembled, the price still ranged from 200 to 400 euros (between 30 and 40 repairmen)!!! Luckily, the last one I spoke to over the phone asked for the modest sum of 15 euros!!!! Miracle finally, an honest technician!!! Thanks to him and to you!!!! Best regards!!!!!!!!!!

timar146 · Answer

Hello,

I had the same problem with my TV, so I changed the capacitors. There were 3 out of 4 that were bulging, but I replaced all 4 with 25 Volt capacitors instead of 10 Volts.

The problem seems to be solved, we'll see if it lasts over time.
For 4 euros and a few dozen minutes of disassembly, soldering, and reassembly, I'm pretty happy that it works.

Anyway, if the problem is the same, don't hesitate to give it a try.
++

corleone69 · Answer

Thank you very much for your advice! I had the same issue with my Samsung LE40M86BD screen, and thanks to 2 capacitors found in an old PC power supply :) and a soldering iron for 15 euros, my TV is working perfectly again! ;)

lechaletdenhaut · Answer

Hello, We had the same issue with our TV, we opened it once and found the two bulging capacitors. Without a second thought, I ordered the suitable capacitors through my work (10 V 1000 UI 150° FM) and the next evening we operated on the "beast" and did as you explained so well: we laid the TV flat on a table, disconnected the small connectors, identified the defective capacitors and their polarity (the less golden side indicates the negative), desoldered the old capacitors with a simple soldering iron, soldered the new ones with "small" tin wire, reassembled, and verdict: Yippee, it works and our TV is functioning as before!!! Cost: €2 instead of the €400 estimated by the repair technician, phew thank you the internet and the kind informants and goodbye Samsung, I doubt we will buy this brand again, too bad for them...

vince · Answer

Hello,  Thank you for your testimonials and your photos.  Same problem as everyone, the red LED on the front is flashing but the TV won't turn on. Opened the back cover, 2 bulging capacitors. Replaced them with 2 new ones with a higher voltage (25V instead of 10V) To desolder, you will need a soldering iron with a high power rating. Result for €1.80 and 30 minutes of work, a working TV. For those of you who are watching your LED flicker instead of your screen, don't hesitate, get your soldering irons ready.

tarascon2 · Answer

Which component is located behind the two solders, as indicated by the pink arrow? The copper trace does not extend to the solder joint.
[url=http://www.zimagez.com/zimage/5fd5d83db7c8653c4c641f9872967faa4.php][img]http://www.zimagez.com/miniature/5fd5d83db7c8653c4c641f9872967faa4.jpg[/img][/url]
I have never seen capacitors explode like that in my life; these are just simple, ordinary capacitors not suited for a power supply board, which cost 18 euros each.

zicos · Answer

Hello I have a Samsung LE40R86BDX/XEC and I have the same problem, meaning clicks without sound or image. I followed the forum's advice and changed 4 capacitors. 2 of 2200 microfarads that were bulging and 2 of 1000 microfarads that were normal. The problem persists, nothing has changed for me. I noticed that I have the same model of TV as ALEXKA, for whom it didn't work either. I therefore suspect that for this model of TV it is not just a matter of capacitors. Unfortunately for us!! There is surely another issue, what could it be?? I rely on your advice  Thank you   Zicos

zicos · Answer

Thank you very much for your message of support, as you are providing significant help to me and the victims of Samsung. However, could you tell us a bit more about the location of this part? Is it placed on the surface, or do we need to disassemble things to find it? Thanks again for your valuable assistance. As for my case, I had two blown capacitors, but I changed four and saw no changes. First of all, I hope I didn't do too much damage with my amateur soldering, but I also need to disassemble and look for this part, so if you could help me, that would be very nice.  See you soon Zicos

Anonymous user · Answer

0_o I have the same TV!!! It seems that this problem affects more than one of us!! Luckily, mine works, but I will be extra cautious!! Thank you

piktyy · Answer

Hello everyone,  So I have 2 capacitors that are swollen, and guess what, they are not the ones you have been listing since the beginning!!!  On the 'capacitors' it says: V9A PET!!! For your information, it is indeed the Samsung LE40M86BDX!!! Could someone help me? Which capacitors should I replace them with??? For your information, it's impossible to find the info on the net...  Thank you in advance for your help.

gilmecded1 · Answer

I have the Samsung model LE46F86BDX, which is the same range of television, and I have exactly the same problem. However, now the television won't turn on at all; it blinks red and makes a constant noise. I found a solution (temporary fix) by taking a hairdryer and placing it behind the television at the ventilation openings. I leave it for 5 minutes, and then the TV turns on normally. However, when I turn off the television, it turns back on by itself 2 hours later (in my case, only the red button and the noise light up), which is annoying, so I unplug it. Indeed, Samsung has an authorized repair service, but the price is quite high; you should expect to pay around €230.

tarascon2 · Answer

Hello  change the capacitors or install a small interior car radiator.

kefoo · Answer

I have thoroughly searched this forum and ordered the capacitors. Apparently, the handling seems easy and the savings substantial. Thank you to everyone who took the time to give their valuable advice I will post a message to provide the final result in a few days  MY TV is obviously a Samsung: LE40BD74BD purchased 4 years ago

sissou13700 · Answer

Hello, I have changed all the capacitors as well as the 4 opto-isolators and the problem persists. Does anyone have a solution to give me? Thank you.

franciscow · Answer

Hello, Together with a work colleague who also received the same non-working Samsung TV, we attempted to repair the board. The symptoms are as follows: The TV tries to turn on and then shuts off. Upon disassembly and inspection, we do not see any bulging capacitors. He replaced the capacitors (top right corner of the board) but the TV still won't work. Now, the TV shuts off and attempts to restart in a loop without success. I've read through all the posts, and some others have the same issue. Apparently, there are no burned capacitors. What do you recommend?? Is there a reliable method to test a capacitor with a multimeter (resistance test?)? Because some capacitors that are apparently "good" show resistances in the mega ohm range, but that seems strange to me. I expected to saturate the tester... which happens with other capacitors... Thank you in advance!!

Baptiste Pernety · Answer

Hello everyone,

I hope my comment will be useful to others who come across it and read it, as this discussion topic was very helpful to me.

My Samsung LE40M86BDX television was taking a while to turn on. During the startup phase, a "click" sound was noticeable with a fairly pronounced frequency... At least one "click" per second... After about a minute or two, the television managed to turn on, display an image, and produce sound. So far, so good, I guess. Once turned off after about twenty minutes, while the television was supposed to enter "extended standby" mode, it would turn itself back on. I had to unplug it from the wall to avoid this annoyance.

After consulting this discussion thread, I decided to take a closer look at what might be causing the issue. I removed the back panel of the television. The power supply board is the one visible in the center of the unit once the back is removed...

Upon closer inspection of this board, two capacitors were slightly bulged, just before bursting... I desoldered the faulty components, noted the specifications, 2200µf /10V /105°C.

A quick internet search helped me find some addresses of electronic parts retailers in Paris; I want to share these addresses as the people at these two shops are very professional and helpful... Both shops are located in the 11th arrondissement of Paris (Metro/RER A Nation).

http://www.selectronic.fr/
https://web1.ibcfrance.fr/index.htm

I went to Selectronic, and as soon as I presented the part to the seller, he smiled and told me I was the 4th person that day... I asked him why, and he asked me: is it for a Samsung TV?... And yes, my friend, you guessed it right, that's why....

So I bought some capacitors 2200µf /25V / 105°C. Note that I changed to 25 Volts in voltage (they are just a bit larger in size, don't be surprised, but the spacing of the leads remains the same), a soldering kit with a 40 W soldering iron because I admit I had a bit of trouble removing the faulty capacitors with my old 30 W iron... All for €13.90....

Back home, soldering iron plugged in, action... I placed the new capacitors in the slots of the old ones, respecting the polarity (when removing the faulty capacitors during disassembly, be careful of their mounting direction, although the prints on the board remind you...)... Soldering with tin... A quick cut with wire cutters to remove the excess leads of unnecessary capacitors, and that’s it...

I reassembled the board, reconnected all the connectors I had removed previously to take out the board... Then I tested it by plugging it back in... And there, surprise.... Just a click at startup like before, then the image and sound followed... I turned it off, tested again... And the same thing, an instant start... I turned it off and after about twenty minutes, the unit entered "extended standby" without turning itself back on. I reattached the back panel of the television. It is functional again...

In conclusion, although I contacted the service provider responsible for repairing Samsung brand televisions, I have only one thing to say, they will not see either the shade of my television or my money... Because I can well imagine they charge a fortune for this type of repair...

Thanks to everyone who shared their experiences here.

If you would like advice regarding the procedure to follow or even the equipment to use, feel free... I will try to provide you with information as best as I can, as others have done here before me...

Sincere greetings to all.

CélineB · Answer

Fearing a class action lawsuit, Samsung Canada is paying for all capacitor changes, whether the TV is under warranty or not. I called Samsung on Saturday, March 12, sent the invoice on the 15th, and the technician called me on the 18th to say he would come on the 21st. It took him less than 30 minutes (he repairs a lot!). Two capacitors were bulging and cracked. One must never forget the legal warranty, which is much longer than that of the manufacturer (a product must have a reasonable lifespan; French law is very similar to Quebec law, so I would look into that). However, we have the right to initiate class actions. Americans are currently exploring the possibility of filing a class action lawsuit. See this link: http://www.associatedcontent.com/. Title: Samsung LCD Televisions Now the Focus of a Class Action Investigation... My TV was purchased in March 2008. However, if you are a better handyman than lawyer and want to do it yourself, there are several videos on YouTube. Consumers of all countries, unite!

annaloucia · Answer

Hello,

Same problem with my model LE46F86: very long to start, constant "click click" noise....

While searching on Google for this issue, I came across this site. I followed to the letter the advice from various others affected by their SAMSUNG screens by changing 2 bulging capacitors out of 4.

Result: perfect! My TV is working normally again for:
- 2 euros
- 30 minutes of repair (unscrewing the TV cover, finding the capacitors, soldering, reassembling the cover)
- and a pride in having solved this issue at a low cost

Thanks to everyone who shared their experience and to this site which deserves to exist! It allowed me not to waste money on a shady repairman and to stay calm!

Best regards

loxx · Answer

Hello everyone.  Similar problem, my TV won't turn on, it makes a ticking sound at startup but nothing happens. A technician came and replaced two capacitors with larger ones, but the TV still won't turn on. According to him, the entire power supply board needs to be replaced, price: €180 including tax.  Do you have any cheaper solutions than the technician's, and how to proceed?  Thank you.

causier · Answer

Hello and thank you all for your valuable advice!  I just repaired my Samsung LE46F86BDX/XEC with 2 capacitors for €1.5! The hardest part was desoldering the old ones (you need a 40W soldering iron to manage that). I found 2200uF, 16V capacitors with a lifespan of 10,000 hours (on the website). It's important to check the lifespan, as it usually varies from 1,000 hours to 10,000 hours. For 10V capacitors, I found a maximum of 5,000 hours. So I went with the 16V ones. Contrary to what some say, it’s not necessary to match the voltage of the capacitors on the board.  They are a bit bigger (12.5 mm in diameter) but they fit.  Like others, my TV was 2 years and a few months old...

galilée428 · Answer

Hello and thank you, how does it work? I have a Samsung TV LE40A676, and for the past two days, it wouldn't turn on, the red light was blinking and then would turn off, etc... I took it apart and noticed two bulging capacitors on top, thanks to some photos I've seen. I replaced the two capacitors (1.80 euros at some electronic store) and it’s working again... My "issue" is that in all the responses I've read, the defective capacitors were 10V, which were then replaced with 25V (the TV model reference is different), while my two dead capacitors were already 25V (1000 µF), and there are two others next to them, 10V, which were intact. The seller told me that we couldn't put in a capacitor higher than 25V, it would be way too big. So for now, everything is working normally. Thanks again, and hats off to this site for effective help between internet users.

singour1 · Answer

Good evening I have the model UE40B7000WWXXC, which is a Samsung LED that I have had for over 2 years, but for the past few days a white line of about 10 cm has appeared in the middle of the screen, attached are the photos. What could it be, please? Can we fix it ourselves? Is it a capacitor problem? Thank you for your help. https://imageshack.com/photo/my-images...082011130.jpg/ https://imageshack.com/photo/my-images...082011126.jpg/ https://imageshack.com/photo/my-images...082011127.jpg/ https://imageshack.com/photo/my-images...082011128.jpg/

libertyman74 · Answer

Hello everyone, and thanks to this site and all the people who helped me fix my Samsung TV.   I want to share with you a LITTLE TRICK THAT I DISCOVERED that can help you! !   First, I started by changing all the capacitors on the power supply board, as previously mentioned in the forum (little info, prefer to use 25v ones, no issues, better and more common)   But dang, still the click, click of the relay! !   So after seeing on the forum THE ISSUE WITH THE IC with 8 pins on the electronic board, the second one, where there are all the external connectors, but on the other side of the connectors on the board side of the TV, you have to disassemble it, the IC is located near the word EEPROM written on the board. . .   I ordered it BUT PREPROGRAMMED FOR SAMSUNG from this site, BUYLAND.FR, (found a bit higher up on the forum), very good, delivered 24 hours later, a bit more expensive, but nothing compared to a new TV. . .   http://www.buyland.fr/store/product_info.php?products_id=1767   Then I installed it (easy for me, soldering is my job) and ! ! ! Damn still the click, click, so frustrating! !   Then it came back to me A MANIPULATION that I had seen, I don't remember where, but it said to hold down the power button for 2 minutes, with the TV plugged in, and it would do a RESET . . .   So I tried it, and THERE WAS A MIRACLE, a long beep and the TV started up perfectly! !   So I think you can try this manipulation BEFORE changing the IC, because I didn't try the manipulation after changing the capacitors! ! ! So give it a try, it might work??   I hope I was able to help you just like you helped me, happy fixing! ! !

libertyman74 · Answer

Hello everyone, and thanks to this site and all the people who helped me fix my Samsung TV...   I want to share with you a LITTLE TRICK THAT I DISCOVERED and that can help you! !   First, I started by changing all the capacitors on the power supply board, as mentioned earlier in the forum (a little info, it's better to use 25v ones, no worries, they are common)   But darn, still the click, click of the relay! !   So after seeing on the forum THE ISSUE WITH THE 8-PIN IC on the electronic board, the second one, where all the external connectors are, but on the other side of the connectors on the TV side, you need to disassemble it, the IC is located near the word EEPROM written on the board...   I ordered it BUT ALREADY PROGRAMMED FOR SAMSUNG on this site, BUYLAND.FR, (found a bit higher up on the forum), very good, delivered 24 hours later, a bit more expensive, but nothing compared to a new TV...   http://www.buyland.fr/store/product_info.php?products_id=1767   Then I installed it (easy for me, soldering is my job) and ! ! ! Damn, still the click, click, so frustrating! !   Then I remembered A MANIPULATION that I had seen, I don’t remember where, but it said to hold the power button down for 2 minutes, TV plugged in, and that it would do a RESET...   So I tried, and THERE'S A MIRACLE, a long beep and the TV started up perfectly! !   So I think you might want to try this manipulation BEFORE changing the IC because I didn't try the manipulation after changing the capacitors! ! So give it a shot, it might work? ?   I hope my trick can help you ? ? Happy tinkering, thanks to everyone...

flatrez · Answer

Hello, same problem as you and I changed the 2 capacitors and it started again all for 7.5 euros including soldering..... thank you.

superthevip · Answer

Hello,  For my part, I changed two 25v 2500µf 105° capacitors for the same ones and it's working perfectly again. Weirdly, since then I can't pick up as many channels on the DTT. ?.oO°Oo?oO°*GUSPAS*°Oo?oO°Oo.? __?.oO°Oo?oO°*2036*°Oo?oO°Oo.?__

wowidnico · Answer

Good evening  I have a Samsung UE32C4000 LCD screen and the problem is that my TV won't turn on at all.  No red standby LED, no image, nothing.  I have already tried unplugging it, leaving it for 10-15 minutes without touching anything, and then plugging it back in, but nothing works. Help me, the TV is barely 6 months old, I'm really upset ;-{)

boucoul · Answer

I just repaired a Samsung plasma TV PS-50P96FD from January 2008. The problem was that the red LED on the front was flashing with a tiny ticking sound and nothing else. The TV had not shown any symptoms before this. It was when I tried to turn it on that this happened. I found 2 slightly bulging capacitors, 10V 2200uF 105° from the brand Samwa (strangely, it looks like a sub-brand of Samsung). It should be noted that Samwa makes the worst capacitors, and also, 10V is not enough; 25V or 35V are needed. I put in 35V. However, I noticed that there were other capacitors from this brand; it would be best to change them all for higher quality capacitors (like Panasonic or Rubycon) in order to have the most stable power supply possible, as a good power supply will help avoid damaging the rest of the TV. I think Samsung has its subsidiary manufacture low-quality components to cut costs and especially so that you will buy a new TV fairly quickly. The locations of the faulty components are CB 813 and CB 814.

Thank you for the topic, hoping it helps as many people as possible.

Total cost of the repair on my part: 4 euros!

robocopfp68 · Answer

I followed the information provided on this forum; indeed, there are two capacitors located under the fan. I called a repair technician and told him what it was about. He asked me to disassemble the board and bring it to him, which cost me €10.20. This shows that before getting a TV repaired, you should check online. Thanks to the specialists.

haakoe · Answer

Here it is! For 20 euros, I replaced 3 capacitors that were swollen and therefore out of order, I reassembled the motherboard and my TV is as good as new! Thank you for your advice and long live help forums!!!!!

buzz2012 · Answer

I have the SAMSUNG LCD LE32R86BDX/XEC (11/2007) Model no: BP32EO S/N: 68333HJPA04637A Same symptom for a few days: intermittent clicks on startup (actually trying to wake it from sleep) I unscrewed the back panel but didn't see any bulging capacitors. I managed to turn it on only once by heating the backlight lamps with a hairdryer! (it works) Does anyone have a lead? Which capacitors need to be replaced?  Thank you.

stef · Answer

Hello everyone,

be careful, it doesn’t work, if it was just a matter of charging 4 capacitors for it to work...
I spent the afternoon between ECE, 66 rue de Montreuil and my home, as a result, I am 30 euros lighter, I have 5 new capacitors and a new chip but the TV still doesn't turn on.
So if you have some time and a few extra euros, give it a try.

Best regards

Lord · Answer

Same problem as everyone else: Samsung TV that won't turn on + a "click-clack" sound that's getting longer. I changed the 2 swollen capacitors: 2.8 euros for both and 20 euros for the installation by a professional (that's the basic fee).  Now it works perfectly and I thank everyone for the information provided.

jcv · Answer

Thank you all for the explanations; by changing the 6 capacitors for 30 euros, labor included at AG Electronique Lyon, my TV, which the Boulanger technicians wanted to send for recycling (or to the dump?), is working perfectly again.

Fax Emilie · Answer

Thank you for your advice. I had a clicking symptom (about 1 click per second and the screen of my HV-224TBW monitor (brand: Haier) remained black. I noticed that I had bulging capacitors in the switch-mode power supply section. There was one that wasn't bulging, but I replaced it anyway with the others. I found my 6 capacitors at SELECTRONIC: https://www.selectronic.fr/ 4 capacitors 1000 µF 25V 105° (Selectronic reference: 1930-6) be careful: they are tall; I had to make an opening in the shielding cover because they would have been in contact with that cover (not good) and 2 capacitors 470 µF 25V 105° (Selectronic reference: 1930-5) And it works!

highendsound · Answer

Hello,  I have a Samsung LE52M86 that is 4 years old. Like most people, I've experienced the clicking sound and no picture... I searched online and ended up on this forum. As expected, after disassembly, I saw 5 capacitors of 1000µF that had leaked... I looked for a store (hard to find...), bought the capacitors and a soldering pump. After a bit of patience and sweat, my TV started up again like a charm. I was the superhero of the day for my teens who were depressed about not being able to use their PS3. In summary, thanks to the forum for the help I found and shame on Samsung for the poor quality of their components and/or design of their TVs.

masst967 · Answer

Samsung LCD TV LE40A676 Hello everyone. This TV is 2.5 years old, and for the past week, it has been experiencing all the symptoms mentioned in this thread regarding its refusal to start. In fact: it takes longer and longer to get to the image, ultimately not starting at all. I followed the recommendations of various people on this forum to the letter and decided to attempt the repair. After opening the back cover, I noticed that there were two capacitors with bulging tops on the "power supply" board located in the center. You can find a photo of this board at the following link: http://www.heberger-image.fr/images/86380_2_POWER_SUPPLY_LCD_SAMSUNG_LE40A676.jpg.html  - Capacitors #1 and #2 were bulging, their original value was: 1000µF/25V/105°C. I replaced them with identical capacitors. - Capacitors #3 and #4 were not bulging (so perhaps not faulty??), their original value was: 1000µF/10V/105°C. I replaced them with capacitors of 1000µF/25V/105°C. Once everything was reassembled, the TV restarted normally. Cost of the repair: about €4 for the 4 capacitors compared to at least €200 from a service center, which I won't name. So I would like to thank everyone who posted on this topic: a big hat tip.

nounours78 · Answer

Hello, It is probably the 4 capacitors located on the power board that are faulty, meaning they are bulging on the top. If you are in the Paris region, all you need to do is dismantle your power board and take it to an electronics store that will replace those capacitors for you. You should be able to manage for a maximum of 25 euros, and your TV will work like new again. I recommend ECE, 66 rue de Montreuil, 75012 Paris. Quick and friendly, Best regards,

Lexxxar · Answer

Thank you all for your advice!  Thanks to you, this ignition problem was resolved in a day! I took the motherboard to 66 rue de Montreuil; this is the 5000th time he has fixed this error on Samsung TVs!!!  While discussing, he sent me this video where reporters discuss the topic and came to his store:  The planned obsolescence of our devices https://www.youtube.com/watch?v=f3a42dMgvkU  Cost is €25 or €5 for those who have a soldering iron!  Thanks again!

Lexxxar · Answer

Thank you all for your advice!  Thanks to you, this ignition problem was resolved in one day! I took the motherboard to 66 rue de Montreuil; it's the 5000th time he has fixed this error on Samsung TVs!!!  While talking, he sent me this video where reporters cover the topic and came to his shop:  The planned obsolescence of our devices https://www.youtube.com/watch?v=f3a42dMgvkU  Cost €25 or €5 for those who have a soldering iron!  Thanks again!  If the TV continues to malfunction, you'll need to change a chip on the HDMI port board; it records a failure, so we remove it!  Cost €11, including installation please!

REGAN · Answer

Hello, I have a Samsung TV LE46A676 that suddenly turned off and restarted 15 days ago with clicking sounds. The screen lights up but is blurry with green lines, there is 4 seconds of sound and then it restarts. Based on forum messages, I opened it and checked the power supply -> no bulging capacitors, but as a precaution, I replaced the capacitors: 2 of 1000, 2 of 820, 2 of 470, and 2 of 47 to cover all bases, and the problem is still present. Do you have any ideas? Maybe the TNT tuner?

ancheshare · Answer

Hello same problem as everyone, but no swollen capacitors, I changed them but the TV won't turn on. What can I do?

clad 85 · Answer

For those who are not handy at all except for removing 6 screws, carefully look at the model of your power board, note the serial number, and check eBay. I found mine for an older LCD TV (LE40M86BDXIXEC) from 2007, valued at 1790 euros, which had a power-on issue and click-clack noise. I found a new board for the ridiculously low sum of 48 euros, shipping included, delivered to my home in a week. In any case, thanks to the forum that helped me identify the problem.

yakmandji · Answer

For my part, I put 1000uf/25V capacitors instead of the 2200uf/10V ones that were bulging because I didn't have any others, and it worked. I wasn't sure if using a lower microfarad value would work, but apparently it seems to be fine. The TV starts up like new. Thanks for the tip.

esmeralda6424 · Answer

Hello,  I came to your forum for issues with my plasma screen that would turn on and off immediately. Thanks to your forum, I was able to repair my TV, which is now working very well. I removed the back cover of my TV since the warranty has expired. I found the faulty capacitors on the power supply board. I changed 4 capacitors and now it's up and running again. This story cost me about 20 euros instead of throwing 800 euros in the bin if I had listened to the repairman.  Thank you very much for your help.

Zouzou · Answer

Good evening, I have a Samsung TV 127cm and for a few days now it won’t turn on. When I turn it on, the picture comes and goes immediately, but the sound remains. I tried bringing a flashlight closer to see if the image was there, and yes, the image is there but I can’t see it. Can someone help me? Thank you in advance.

hassissi · Answer

I would like to make my modest contribution to inform you that in recent days, I had the same problem with a Samsung TV LE40R73BDX/XEF (the TV would not turn on while making a clicking noise). I replaced the 4 capacitors at a friend's place and it's working again. My TV is functioning normally once more. I want to confirm that changing these capacitors is very easy. You just need to remove the 21 screws from the back cover, disassemble the motherboard (6 screws and a few connectors), and then find the 4 capacitors: 1000 µF 25V (the originals were 10V), a soldering device and that's it. I think I've saved about a hundred euros if I had taken it to a repair shop. Good luck to everyone. Hassissi.

nawfel192 · Answer

Hello,  after reading all these comments, I finally decided to dismantle my Samsung LCD. Then I noticed that my capacitors are in good condition and the TV still doesn’t work; it won’t turn on and continues to emit clicks every 5 seconds... what could be the problem?  Here’s a photo of my capacitors https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10342896_10204085221680318_7322306721396675932_n.jpg  Reply

Dapinou · Answer

Hello everyone,  I had the same issue with my LE40F86BD. A ticking sound on startup with a TV that was struggling to turn on and then wouldn’t turn on at all. By the way, I even had a problem where the TV would turn on by itself (I frequently found it on in the early morning)  I took apart the power supply board and found 5 capacitors that needed to be replaced. I went to Espace Composant Électronique at 66 Rue de Montreuil in Paris to get them replaced.  The person there is experienced with this procedure (I actually found their address on the forum). 10 minutes and €36 later, I left with my board under my arm with its new capacitors.  Once I reassembled the board, everything worked perfectly, and I saved myself a big expense!

cachousam · Answer

Hello, Another successful repair on a Samsung LE46F.... Slow to power on and turning on during the daytime without any action on the remote control. The same capacitors are at fault. 1 hour of work. The longest part is taking the TV off the wall and protecting it. Thank you for your guidance. Here are the photos of the operation:  Disassembled TV http://img4.hostingpics.net/pics/773173tldmonte.jpg  Power board disassembled http://img4.hostingpics.net/pics/495117cartealimdmonte.jpg  2 bulging capacitors http://img4.hostingpics.net/pics/3973672condos2200bombs.jpg  Capacitor polarity identification http://img4.hostingpics.net/pics/262924repragesenscondoavant.jpg  The 4 capacitors unsoldered http://img4.hostingpics.net/pics/363454condosdssouds.jpg  New capacitors in place http://img4.hostingpics.net/pics/379862Nouveauxcondosenplace.jpg  See you later

Samsung LE40M86BDX/XE LCD Powering Issue

127 answers

Very small left scrollbar

Electronic invoicing

Anomalies in my laptop usage: virus?

Help: assign a number to a word in another cell

Aol password loss and change of pc

Training of the receiving coil

Doctolib plans to use your health data for its ai research

Missing lock icon

Caching / buffering issue on m3u stream with emby

Unable to open xsl and xslx files