At startup, blinks red in sleep mode.

Question

Hello,
Thomson brand model Zéo 36MKL15 LED SERIES 10380 by Spark
On the power button, when turning on, the green light automatically goes into standby with a rapidly flashing red light... Is this a serious malfunction or just a component that needs to be replaced (type and location)? Thank you for your cooperation. Best regards

Configuration: Windows XP Internet Explorer 6.0

champignon69360 · Accepted Answer

Honestly, you are so good. The child safety trick works, and it's clear that before reading your message, I was really panicking. I thought my TV was dead. THANK YOU.

baich · Answer

I have the same problem and I would like to have some advice.

la buse · Answer

Hi, same damn thing for me my seeing light is on at the bottom right with error 74 help me please

lionel · Answer

you need to be in child safety mode, simply press the sleep button for several seconds

0821gerald · Answer

Hello,it seems rather that it's a power supply issue that has likely failed.If anyone has more info, I will keep searching; apparently, we find more information on Spanish websites.

sussi · Answer

Good evening everyone, a quick note:  it's difficult for me to help you, I don't even know if it's a printer or a modem or a TGV  it would be easier with more information  sincerely, SUSSI

Mahaks · Answer

Hello, I had the same problem.
I couldn't turn on my TV from the power source.
The TV light was blinking constantly.

I read this forum and one message caught my attention.
The message talking about the child lock.
I agree with him.
I held the button for 1 minute and then I tried to turn on the TV with the remote control.
Perfect, it turned on.
I turned it off with the remote and the standby light is no longer blinking.
Try it, it costs less than a repair.

I hope I helped you.
See you soon.

max17 · Answer

Hello everyone, I had the same problem with my Xbox 360 where the ring around the power button starts flashing and turns red when I turn it on, and I managed to get it working again like before. To do this, just wrap your Xbox 360 in a blanket and turn it on for at least 1 hour so it heats up a lot. After an hour, take it out, turn off your console, let it cool down for about ten minutes, and then turn it back on. Normally, the console should work again. I did this a month ago, and so far, there haven't been any bugs with the console. I hope I've helped you enough, and let me know if it only worked for my console. Happy gaming everyone! ;-)

paupaul · Answer

Hello everyone, I hope I can help you but when the light starts flashing red, your console's CD drive is dead. My console showed "disc unreadable" even though the game is only from yesterday. I called customer service and they told me it was my drive that was damaged. They even asked me if it was flashing red, I said no, and they asked why because otherwise the drive is dead, that's what they told me. So if you have this problem, call customer service, they will come and pick it up. It took them 1 week and 3 days for me, it doesn't take long. See you later :)

tetton49 · Answer

Hi people, this is a R.O.D! That means your rods are poorly fixed and this causes a malfunctioning power supply!!!

kader13 · Answer

"Well, that's my ass, it's chicken..."

denisbateau · Answer

You need to press the button where there's a drawing or it's a straight line to the right of the remote control, and it works great.

At startup, blinks red in sleep mode.

12 réponses

Samsung j5 unable to answer

Scam of the suvedene highway

Minecraft restore the cursor and the bar.

My ps3 keeps shutting down on its own...

Samsung series 4 led tv logo display...

How to enable bluetooth on a samsung tv?

Ctrl key issue

[metin2] sura ...

Freebox tv locked step 2 or network

Error 46 (brother dcp-150c) cleaning impossible