Unlocking 6000 CD RDS EON/FORD
Solved/Closed
akabaabaabarback
-
AK -
AK -
Hello,
I have locked my cd 6000 cd rds eon, I just found the code, does anyone have the procedure to unlock it?
Thank you for your help
I have locked my cd 6000 cd rds eon, I just found the code, does anyone have the procedure to unlock it?
Thank you for your help
Configuration: Windows Vista Internet Explorer 7.0
2 réponses
Hello
mine was blocked and I managed to unlock it by doing the following steps
after unplugging and replugging the car radio
-press the button 6 and hold it down.
-turn on the car radio while still holding the button 6
-after turning on the device (the display), hold the button 6 down for 10 seconds.
Logically, the car radio displays "code 11" or there will be information scrolling for a few seconds
and then... hold down the button 1 for about ten seconds
normally "CODE" will be displayed ((the code was written on the car radio))
All you have to do is re-enter the original code.
-button 1 for the first digit
-button 2 for the second digit
-button 3 for the third
-button 4 for the last
-and finally button 5 to validate your code.
It worked for me, I hope it will be the same for you.
Have a nice day
mine was blocked and I managed to unlock it by doing the following steps
after unplugging and replugging the car radio
-press the button 6 and hold it down.
-turn on the car radio while still holding the button 6
-after turning on the device (the display), hold the button 6 down for 10 seconds.
Logically, the car radio displays "code 11" or there will be information scrolling for a few seconds
and then... hold down the button 1 for about ten seconds
normally "CODE" will be displayed ((the code was written on the car radio))
All you have to do is re-enter the original code.
-button 1 for the first digit
-button 2 for the second digit
-button 3 for the third
-button 4 for the last
-and finally button 5 to validate your code.
It worked for me, I hope it will be the same for you.
Have a nice day
Is there a procedure to follow? The three connectors are connected and powering the unit.
Complicated, isn't it?
Thanks in advance.
AB.