JVC camcorder troubleshooting

Hello, I have a JVC GR-D20E camcorder
After changing the cassette, I received the error message E06 remove battery, which I did, and now I have the error message E03 unit in safeguard .....
And as soon as I insert a cassette, it makes noise and the tape gets eaten
What should I do???
Thank you very much in advance

Hello Michel,

My JVC GR-DF540 (mini DV) camcorder is giving me the following error message: "01 - unit safeguard mode, remove and reattach battery."
I tried plugging it into the mains, putting in a new battery, the sellers (Planet Saturn) also tried, but nothing works; it's like it's locked, and I can't even eject the cassette!
Yet it's barely 2 years old, and I really take care of it.
Thanks for your help, Michel!!

Elodie V

Hello Michel, I don't see a response but I'm trying. Is JVC and Panasonic the same since I have a Panasonic? The MiniDV door does not close at the bottom, resulting in the mechanism dropping with the door open, estimate 320€. Thank you for your contact.

I have a JVC digital camera with a built-in hard drive, I plugged it into the train's outlet and it won't turn back on, I'm afraid it got fried. Can anyone tell me if someone has experienced this before? Thank you. If yes, can it be repaired?

Hello;
On my JVC GR-D23E camcorder, purchased 3 years ago, the image is becoming increasingly unstable (distortion on the viewfinder and on the image, slipping downwards, like a beginning of scanning)
Can you diagnose the issue, let me know if it is possible to repair it at a low cost, and whether it is due to the playback heads or the impact of the cold? Thank you for your response.

Hello to you

I have a JVC GR-D23E camcorder and the problem is that the image is far from clear.
When there's too much light, all you see are very bright silhouettes, and when it's a bit dark, we have to turn on the light and everything is blurry, and the speed is slowed down. When it's dark, like at a party with ambient lighting, you can't see anything.
I suppose it's a setting issue, but I don't know which one.
Thank you in advance for your response
Maud

Hello, I live in Toulon and I have a JVC camcorder. Suddenly, without any shock, when I film, there is no image; everything is blurry! But when I watch a tape, the image is perfectly clear. It's no longer under warranty, and the estimates are not free!

Hello,

"lens cap" message on GRD 20 out of warranty! I opened it and apparently it would be the SMD transistor at the back of the CCD that is dead, unless I'm mistaken! I don't have the schematic, what is the reference of the transistor or which one can I replace it with?
Thanks in advance!

Hello, I have had a JVC GR-D21E camcorder for some time, and I can't turn it on as it displays E03; we have tried ejecting and retrying without success. What should we do? Thank you for your help.

Hello Michel
I have a JVC GR-DX97/77/67 camcorder that is now starting to bother me. Every time I open it to film or to play a cassette, it always displays "PLEASE WAIT, CONDENSATION, OPERATION PAUSED"
What should I do?
Thank you

Michel, can you please help me? I have a JVC GR-AX240S camcorder and I have a problem: every time I want to record, it says end of tape even if the cassette is new. If I take a previously recorded cassette and I watch it, then when I want to record to finish it, it says the same thing. Thank you for your help if you can, thank you.

I have a problem with my JVC GR-AX240S camcorder; every time I try to record, it says end of tape, even though the cassettes are new, and I can't record. What should I do, please? Thank you.

Salut Michel, je suis dans une impasse avec mon caméscope JVC Mini DV car voici la panne : j’enregistre des images mais je n’arrive pas à les voir, l’écran reste bleu. Je ne comprends pas pourquoi. Merci. Je me nomme Pierre et je suis en Île-de-France, dans le 91.

Hello,

I have a problem with my camcorder screen when I want to film or review films; the images on the screen are flickering and not clear. I can only see small rectangles or bands. Also, I have to use the viewfinder to film or watch, and I cannot access the different functions such as Menu, Select set, etc. Without reason, and regardless of the type of tape, sometimes the image becomes correct on the screen. It's random but increasingly frequent.
Can you tell me what causes this problem and how to solve it? (considering that my device is no longer under warranty)
Thank you in advance.

Hello,

I have a JVC GR-DVP9 camcorder, and I have a problem with the TFT screen. There is no display when it is fully unfolded. Could it be an issue with the ribbon cable? Do you have the exploded views to help me disassemble the camcorder and check the connections?

Thank you,

Frédéric

Le code d'erreur "lens cap" est un défaut de fabricant pris en charge par JVC à condition d'avoir la facture et ce, avant le mois de juin 2008. Pour plus d'infos, consultez le site JVC.

I can no longer record the voices, but nothing else.

Hello,
I have an analog camcorder JVC, and when I insert a tape or when I record, the image is full of interference. Is the problem due to the playback heads??
This camcorder is about 5 years old; can we still find parts for it, and if so, where?

Thank you

Best regards

Hello

I have a JVC GR-DF 540 E camera

when I open the cassette compartment, it doesn't eject:
the door opens but the holder remains closed

help!

thank you for your assistance

bv3w