Hello, my JVC GR DX55 E camcorder refuses to eject the cassette, the error E01 is displayed. Nothing works anymore. The screen shows "unit in safeguard mode." I have unplugged the power several times, but nothing helps. Is it an internal memory issue or a mechanical problem? Thank you in advance;
philous
Hello
Having a JVC GRDX 300 E digital camcorder that’s three years old, I had to clean the heads in August with a tape, but the result was disappointing, so I used alcohol and a cotton swab since then, it’s been a blue screen with nothing else. I suppose I moved the heads without knowing exactly where they are!!! A quote is 100 euros, a new one is 200 €. Is there a way to get it working again?
Thank you, and have a good weekend.
gentil
Thank you for your response. In fact, I live in Toulon and I am going to Marseille to the only JVC service in the region.
gentil
Hello friend. My JVC GR D23E camcorder has a problem; when I switch to recording mode, I don't have any image on the LCD screen or in the viewfinder, everything else works normally, including settings and tape playback. Thank you for your response. I wish you a great day. MARC.
philous
Hello In response to Gentil, regarding your camcorder, I suggest you check with the JVC after-sales service in Paris if you live in the area because I went there for the above problem and within an hour I left with it in brand new condition. I thank them, by the way (at no cost). Good after-sales service. The store is in Montmartre. Have a good weekend.
TRODAT
Hello,
I have an issue with my JVC camcorder that no longer accepts tapes (error message). Would you be kind enough to provide me with the exact address of the JVC after-sales service? Thank you again.
kassim45
Hello, I have a JVC GR-DX55E camcorder, which says "lens cap" when I turn it on. Playback is normal. Unfortunately, the device is no longer under warranty. What do you suggest? Thank you for your response.
thomas
Hello, I have a Sony TRV 900 camcorder, Sony's customer service is asking for 400 euros, which is too much for me, could you help me repair it? I live in Marseille. Thank you.
nadette83
Hello Michel 725,
I am in the vicinity of Toulon
I have a JVC GRC2 movie autofocus camera
the power switch does not trigger anymore when I press it, recording is no longer possible
what should I do??
thank you for your help
Régis du 83
Hello, I have a JVC GR-D93E camcorder, and after a fall, I got the following error: E03. Can you give me the solution to unlock it? The tape is out, but I can't put it back in or access the menus. Thank you Régis
hyacinte77
Hello,
I have a problem with my JVC GR-DX27E camcorder, the image it displays is completely blurry and I can't seem to fix it, so to speak, it is unusable!!!
What’s strange is that the films that were recorded with a clear image, before this problem, are still played very clearly on the camcorder.
Do you have any idea what the problem could be and how much the repair might cost??
Thank you for your reply
P.S: I won't hide the fact that this is really bothering me because the baby is going to arrive soon and I would like to be able to film those first moments..... Sniff.
guillaume
Hello,
I have a JVC GRDX25E camcorder and when I try to record, I get a black screen with lines and a message saying "lens cap." Can you please advise me?
mohammed
The LENS CAP error code indicates a sensor defect that is covered by the manufacturer. Therefore, you can have it repaired for free, but the last deadline, I believe, is July 2008. For more information, check the JVC website.
GED
Hello, I just bought a JVC digital camcorder with a 30 GB hard drive. Everything works, but I want to edit videos using MOVIE MAKER, and I'm having trouble. The file extension isn't compatible. The software included is not great for editing. How should I proceed? Thank you for your response, as it's a hassle.
graffx
Contributor
Thank you for stopping polluting other people's posts; I don't see what Movie Maker has to do with this.
nadou
Hello, I have a Sony camcorder, but since my last vacation this summer, it doesn't work anymore. It turns on but makes a repetitive sound, and then the screen shows: C:32:20. I was told that this could be due to the hot weather or exposure to water. I was advised to leave it open for a few days, which I did, but it didn't do anything. Moreover, when I open the part where the cassette goes, it gets stuck. So please, I am asking for your help so that I can repair my camcorder. Thank you in advance!!
gp30dr
Hello, I own a JVC GR DF 540 and when I play the video with the camcorder, there are very annoying audio dropouts. Thank you in advance.
gp30dr
Hello, I have a JVC GR DF 540 E mini DV camcorder, when I replay what I just filmed (with the camcorder), there are very disturbing sound interruptions. Moreover, I feel like this stops the transfer to the PC via IEEE1394, and this happens with several acquisition software. Is there a way to repair it? The issue persists despite using a cleaning tape. Thank you for your help.
Gérard.
j.LUC
Hello, I have a JVC GR-DLV767EG camcorder and I would like to transfer my videos to my Vista PC but
1. I don't have the accompanying software, and it's impossible to find it online. I've been to telecharger.com, but nothing is available. I would like to know if I should use the DV IEEE 1394 cable or USB. I just installed Pinnacle 11, but I don't think it will help me at all.
kaan
impossible to film with my camera: JVC 700X the screen displays "please wait" and "condensation, operation paused" what should I do?
bernard
Good evening Michel my problem is that I have a camcorder GR-DF540E, and I can no longer remove the cassette, the message displayed on the screen is (unit in safeguard mode 01) followed by (remove and reattach battery), I have tried removing and reattaching the battery but the problem remains the same, I can't film anymore....... can I repair it myself thank you
theo
Hello Michel, I'm writing to ask for your opinion on the issue with my JVC MiniDV Camcorder GR-DF540EX: it came back from the service center of the site where I bought it, it works only when plugged into the mains (when the battery is charging) but when I disconnect it, the camera turns off, and when I try to turn it back on, it lights up for a moment (5 seconds) then turns off again. I bought a new battery and tried it with the new one, but I get the same result... Thank you.
glamafra
For no particular reason, my camcorder GR-D240E indicated "eject and reinsert tape" then "unit in safeguard mode 04."
Now it does not accept any tapes.
Any help would be appreciated, thank you.
heimana
Are you sure your tape isn't write-protected? The little slider on one of the edges (rec/save), just in case. Sometimes it just takes a tiny shift... you never know. It's happened to me once (the dumb thing). Good luck!