View original (French)

Configuring eMule with Belgacom B-BOX2

djouk9 -  
 françois -
Hello,
I would like to know how to configure eMule with my modem which is a B-BOX2 from Belgacom
Configuration: Windows XP Firefox 3.0.3

4 answers

  1. LFDC
     
    Hello, here’s how to proceed:

    First, configure eMule at this link http://www1.emule-inside.net/?tm=1&kw=Cloud+Processing&KW1=Emule%20Dedicated%20Servers&KW2=Proxy%20Servers&KW3=Cloud%20Security&searchbox=0&domainname=0&backfill=0

    Fix IP: Find your IP address: start menu -> run -> type: cmd -> ok,
    In the window type ipconfig -> enter (leave the window open)
    Then: Control Panel -> Network Connections -> Local Area Connection (right-click) -> Properties
    -> Look for and click on "Internet Protocol (TCP/IP)" then click on Properties
    -> Click on "Use the following IP address" and fill in with the numbers from the open window
    above.
    - In "Use the following DNS server addresses"
    Preferred DNS Server: 195.238.2.21
    Alternate DNS Server: 195.238.2.22
    -> ok -> close

    Router configuration b-box2

    1. Check the TCP-UDP ports in eMule: Preferences -> Connection -> TCP and UDP (Note the two numbers)
    2. Open Internet Explorer and type in the address bar -> http://192.168.1.1
    3. Advanced Settings -> LAN Servers -> New Entry
    For UDP: server name: emuleUDP
    Access activated: Yes
    Public port: (the UDP noted in eMule)
    Protocol: UDP
    LAN Port: (same as Public port)
    Local IP Address
    -> Apply -> Back to previous menu (LAN Server) and Apply
    Do the same for TCP but replace the UDP numbers with the TCP ones

    There you go, I hope I was clear enough and that this will help you.
    6
    1. novalogic
       
      Thank you for your explanation LFDC, it's been a while since I've been trying to fix this problem.
      0
    2. d.bella69
       
      Hi there, I just tried this maneuver to finally connect in High ID but unfortunately when I enter the 2 DNS I get an error message and I lose my internet connection (I stay on local network only)


      I followed the tutorial for the B-BOX2 (so this point is ok) and for emule (second point ok)

      so the problem remains with the PC (to which I assigned a fixed IP address behind the B-BOX2 but in your tutorial you said: start menu then run but I don't have the run option on the start button in Vista? Or am I being blonde???

      Thanks for your clarification.
      0
    3. little666 > d.bella69
       
      Hi
      if you have Vista in French
      you go to start (the Windows logo)
      in Search you type "Run"
      and there you will see it in the list and all you have to do is click on Run

      see you later
      0
    4. marithé
       
      Hi,
      I'm arriving in Belgium and I'm picking up this thread of discussion that interests me....
      I’m resuming from point 3 of the router configuration.
      Once I get into the depths of the b.box in advanced settings, I can’t find LAN Servers.......
      My box might be newer?

      I need help to fix this low ID!!!!!!!!
      Thanks
      0
    5. LFDC - Sealow > marithé
       
      Je suis désolé, mais je ne peux pas accéder aux fichiers ou aux images. Veuillez fournir le texte à traduire directement ici.
      0
  3. d.bella69
     
    Thank you very much, I'm going to test all of this and I’ll keep you updated :-)

    Have a great day everyone!
    0
  4. duvel
     
    Hello, I have a bit of a problem with Windows Vista and my Bbox. I'm on low ID and it says this, can someone help me please, thank you. Your 53215 port is not reachable. Please review your network config.
    0
    1. azetec
       
      Hello

      Low ID on eMule is often due to poor firewall settings, and UPnP can only connect on the default installation ports.
      Check the ports in the firewall and the incoming/outgoing settings.
      Good evening
      0