How to enter codes on TNB remote
Solved
slydji
-
vidoc -
vidoc -
Hello,
I have a TNB Trio Super universal remote
I have the codes for my HISAWA television --> 253 310
but I don't know how to enter them
if someone can help me
thank you in advance
I have a TNB Trio Super universal remote
I have the codes for my HISAWA television --> 253 310
but I don't know how to enter them
if someone can help me
thank you in advance
6 answers
-
automatic scanning procedure (taken from the tnb zapper3 manual) my scanner is broken so unfortunately I cannot provide a pdf for example.
1- turn on the device
2- press the corresponding device button (tv/vcr/sat)
3- press set for 2 seconds the led should remain on
4 type 5000 for a TV, 6000 for a VCR, 7000 for a cable/satellite receiver
the led should turn off
5 press set for 2 seconds the led should remain on
6 point the remote at the device and press and hold the prog+ button for two seconds release this button the remote will then start sending all the codes it contains one by one.
7 as soon as your device turns off (ignore any other reactions) immediately press a button on the remote to stop the scanning then press set to exit scanning mode
the led should turn off
then try the remote
if some functions do not work repeat the procedure from point 5