Help for programming CAME remote control
Solved
nono
-
Flo -
Flo -
Hello,
I can't manage to program my second gate remote control of the brand CAME TAM 432SA. Does anyone have a detailed manual or a descriptive diagram? The manual is too simplistic to understand.
I can't manage to program my second gate remote control of the brand CAME TAM 432SA. Does anyone have a detailed manual or a descriptive diagram? The manual is too simplistic to understand.
Configuration: Windows Me! Firefox 2.0.0.16
22 réponses
- 1
- 2
Suivant
Here is the methodology for programming a Came TOP 432 NA or 432 SA remote control:
To make your new remote control work, you need to code it as follows:
1- Press both buttons on the new remote control simultaneously until the
LED blinks faster. Release the buttons.
2- Press the first button: the LED lights up continuously.
3- Within 10 seconds, place your old remote control against your new
remote control (as shown in the diagram below: the nose of the old one against the bottom of the
new one) and press the first button on your old remote control. The new
remote control will blink 3 times: the operation is successful.
4- Release all buttons.
5- With the first button coded, repeat the same operation for the second button on the
remote control.
6- Check the proper functioning of your remote control.
If it does not work, contact Telecommande Express at 01 44 70 04 06.
To make your new remote control work, you need to code it as follows:
1- Press both buttons on the new remote control simultaneously until the
LED blinks faster. Release the buttons.
2- Press the first button: the LED lights up continuously.
3- Within 10 seconds, place your old remote control against your new
remote control (as shown in the diagram below: the nose of the old one against the bottom of the
new one) and press the first button on your old remote control. The new
remote control will blink 3 times: the operation is successful.
4- Release all buttons.
5- With the first button coded, repeat the same operation for the second button on the
remote control.
6- Check the proper functioning of your remote control.
If it does not work, contact Telecommande Express at 01 44 70 04 06.
Pendragon
Thank you, I was struggling, it was poorly explained in the manual, especially the arrangement of the remote controls in relation to each other.
Blackcoke
On my remote control, there are 4 buttons, and I didn't need to press the first 2 buttons for x seconds. I simply pressed the button I wanted to program until it stayed on, then I pressed the button on the second remote that I wanted to program on the first one, holding them against each other, with the already programmed one at the back of the one I wanted to program, until the first one blinked 3 times, and that was it.
- 1
- 2
Suivant