View original (French)

Help for programming CAME remote control

Solved
nono -  
 Flo -
Hello,
I can't manage to program my second gate remote control of the brand CAME TAM 432SA. Does anyone have a detailed manual or a descriptive diagram? The manual is too simplistic to understand.
Configuration: Windows Me! Firefox 2.0.0.16

22 answers

  • 1
  • 2
  1. Geoffroy
     
    Here is the methodology for programming a Came TOP 432 NA or 432 SA remote control:

    To make your new remote control work, you need to code it as follows:
    1- Press both buttons on the new remote control simultaneously until the
    LED blinks faster. Release the buttons.
    2- Press the first button: the LED lights up continuously.
    3- Within 10 seconds, place your old remote control against your new
    remote control (as shown in the diagram below: the nose of the old one against the bottom of the
    new one) and press the first button on your old remote control. The new
    remote control will blink 3 times: the operation is successful.
    4- Release all buttons.
    5- With the first button coded, repeat the same operation for the second button on the
    remote control.
    6- Check the proper functioning of your remote control.

    If it does not work, contact Telecommande Express at 01 44 70 04 06.
    202
    1. Pendragon
       
      Thank you, I was struggling, it was poorly explained in the manual, especially the arrangement of the remote controls in relation to each other.
      1
    2. Blackcoke
       
      On my remote control, there are 4 buttons, and I didn't need to press the first 2 buttons for x seconds. I simply pressed the button I wanted to program until it stayed on, then I pressed the button on the second remote that I wanted to program on the first one, holding them against each other, with the already programmed one at the back of the one I wanted to program, until the first one blinked 3 times, and that was it.
      1
  • 1
  • 2