View original (French)

Installation problem with Trust WB-1400T webcam

philippe -  
 joule85 -
Hello,

I’m trying to install a Trust WB1400T webcam "freshly purchased". I did everything as in the manual, but it doesn’t work. I went to the manufacturer’s site to download a driver "perhaps more recent", same... the installation starts but apparently does not finish. A message appears: error 1628: failed to complete installation based on script 
Configuration: Windows XP Internet Explorer 7.0

7 answers

  1. maumau
     
    I have the same problem as you
    have you found the solution?
    2
    1. varek
       
      Did you find a solution?
      0
    2. vanessa et sabrya Posted messages 4 Registration date   Status Member
       
      still not done
      0
  2. clelia
     
    I also have the same problem; I’d really like to get the solution. I have another big problem because mine is on the Wista version.
    1
  3. emi27
     
    I have the same problem and his link is supposed to download something but I can’t because my antivirus won’t let me in since it’s full of viruses, I don’t recommend it.
    1
  6. varek
     
    Same problem as you... Is there anyone to help us?
    0
    1. promadore
       
      the same problem as you (or: same problem as you)
      0
    2. simo
       
      c’est la même chose avec moi
      0
  7. promadore
     
    I finally found the solution for installing the 1400t webcam. For your webcam to work, you would need to install the CD-ROM version 2.0, LTM no. 14382. It has the DRIVERS/ SOFTWARE. OK, bye bye bye.
    0
    1. marouya
       
      I have the same problem as the other person for wb-1400t, and I have the CD version 1.0 but it still doesn't work so do you have another solution???
      0
      2. k-wet > k-wet
         
        my bad, I just realized this thing is useless and that it won’t lead to anything good to install this darn camera that I’m the one blocked myself!!
        0
      3. Marouya > k-wet
         
        Well, I’m letting it go myself, but if someone really has a solution, well that’s nice! (I think I’m still going to buy a camera)
        0
  8. manu
     
    My webcam installation CD 1400t won’t start; it’s dead. How could I fix it to get my camera working again, please?
    0
    1. Marouya
       
      download the driver for your camera, above it’s k-wet who has the link... Here you go
      0
    2. joule85
       
      Hi everyone, so I might have the solution to your problems if you have installed the drivers for the WB 1400t webcam or others... my girlfriend and I had a similar issue; we had installed the drivers but the webcam didn’t work. We went to Control Panel and Add Hardware (the drivers were installed)... hoping to help you. Have a good day, everyone.
      0