Qu'est ce que la commande prompt ?

Résolu/Fermé
jcjuston Messages postés 74 Date d'inscription mercredi 18 avril 2007 Statut Membre Dernière intervention 15 octobre 2010 - 7 juin 2008 à 20:02
 sparks - 31 déc. 2010 à 14:20
Bonjour,

Je ne peux plus mettre mon pc portable sur veille (il fonctionne sous vista edition familiale basique) et j'ai eu la solution sur le site de microsoft. cela proviendrai du fait d'avoir fait un nettoyage du disque. Il me propose une solution mais en anglais et j'avoue que j'arrive pas à trouver le cheminement demandé par manque de notion approfondie en anglais. Je vous joind la copie de la page du site, si quelqu'un peux m'aider merci par avance
France International | Tous les sites Microsoft

Aide et Support Accueil|Choisir un produit|Recherche avancée les articles en français les articles en anglais


The hybrid sleep feature and the hibernation feature in Windows Vista may become unavailable after you use the Disk Cleanup Tool
View products that this article applies to.
Article ID : 928897
Last Review : March 15, 2007
Revision : 1.4
SYMPTOMS
After you use the Disk Cleanup Tool in Windows Vista, you may experience the following symptoms:• You cannot see the Hibernate option in Power Options.
• When you use the sleep feature, the computer does not recover its settings if power is lost.

Back to the top

CAUSE
This problem occurs when the Disk Cleanup Tool disables the hibernation file. The hibernation file must be enabled to access the hybrid sleep feature and the hibernation feature in Windows Vista.

When the hibernation file is disabled, and the hybrid sleep feature is enabled, a backup of open programs and open files will not be saved to the disk when you use the sleep feature in Windows Vista. Additionally, if the computer loses power while the Windows is in sleep mode, open programs and open files will not be recovered, and any unsaved work will be lost.
Back to the top

RESOLUTION
To resolve this problem in Windows Vista, run the powercfg -h on command at a command prompt to enable the hibernate feature and the hybrid sleep feature. To run this command, follow these steps:1. Click Start, click All Programs, and then click Accessories.
2. Right-click Command Prompt, and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type the password, or click Continue.
3. Type powercfg -h on, and then press ENTER.

Back to the top


--------------------------------------------------------------------------------

APPLIES TO
• Windows Vista Enterprise 64-bit Edition
• Windows Vista Home Basic 64-bit Edition
• Windows Vista Home Premium 64-bit Edition
• Windows Vista Ultimate 64-bit Edition
• Windows Vista Business
• Windows Vista Business 64-bit Edition
• Windows Vista Enterprise
• Windows Vista Home Basic
• Windows Vista Home Basic Beta
• Windows Vista Home Premium
• Windows Vista Starter
• Windows Vista Ultimate

Back to the top

Keywords: kbexpertisebeginner kbtshoot kbprb KB928897

Back to the top



Provide feedback on this article
Did this article help you solve your problem?
Yes

No

Partially

I do not know yet


Strongly Agree Strongly Disagree

9 8 7 6 5 4 3 2 1
The article is easy to understand
The article is accurate

Additional Comments:
To protect your privacy, do not include contact information in your feedback.


Thank you! Your feedback is used to help us improve our support content. For more assistance options, please visit the Help and Support Home Page.

Article TranslationsArabicBulgarianCroatianCzechDutchEstonianFrenchGermanGreekHebrewHindiHungarianItalianJapaneseKoreanPolishPortuguese (Brazil)Portuguese (Portugal)RomanianRussianSerbianSimplified ChineseSlovakSlovenianSpanishSwedishThaiTraditional ChineseTurkishUkraineVietnam
Centres de solutions associésWindows Vista

Autres options de supportContactez-nous

Newsgroups


Options de pageImprimer
Envoyer


Aide et Support Contrat de prestations
Contactez-nous | Conditions d'utilisation | Marques | Déclaration de confidentialité

©2008 Microsoft

4 réponses

MEPHISTO69 Messages postés 24842 Date d'inscription mercredi 14 mai 2008 Statut Contributeur Dernière intervention 31 mars 2022 1 004
7 juin 2008 à 20:16
command prompt veut dire ligne de commande, je ne connais pas vista mais je suppose que tu dois être dans une application qui te demande d'introduire des commandes telles que powercfg -h????

Sinon regarde ce topic pour voir si cela règle ton problème Veille Vista
2