View original (French)

"node" detected during kad connection

Solved/Closed
claire912 Posted messages 5 Status Membre -  
 Anonymous user -
Hello,

I installed the latest version of eMule (v0.49a) and the Kadu connection is stuck on "connecting". When I click on "recheck the firewall", I get the following message:

Key: a number that is never the same
Type: "node discovery"
State: "stopped"

If anyone has a solution

Claire
Configuration: Windows XP Internet Explorer 6.0

6 réponses

Réponse 1 / 6
scorpix
 
Hello, I have emule 0.49c and I also had a bootstrap problem with Kad. I put the following address: "http://download.emule-french.org/nodes.dat" in nodes.dat then clicked on bootstrap and everything is back to normal.

I now have my Kad connected, and my downloads are resuming.

As for the discovery of a node, that is completely normal.
88
la cloche
 
Thank you for your tip, the internet server got blocked yesterday and this morning there was no connection, I did what you said and it works again.
0
cewamale
 
Thank you very much
It worked on the first try with your solution ;-D
0
Immalie
 
Super !!! Thank you very much.
0
laso57
 
Thank you, it works perfectly!!!! I've been looking for solutions to fix this problem for 3 days, PHEW!!! Thanks again for the tip.
0
Scorpion
 
It's not working here :-(
0
Réponse 2 / 6
mimosa
 
Good evening
I have the mention "discovery of a node" on KAD. If someone can tell me what to do.

Thank you in advance for your help.
Best regards
13
Réponse 3 / 6
rian
 
Hello everyone!!
I've been following several discussions and I've made a note of all my issues with emul, especially with Kad:
- I connect to Kad and it signals a node more, but I still have red arrows on the planet at the bottom :'(
What should I do?
I have little experience with emul, I unfortunately have Vista and I can't connect to the other servers either!!
Thanks in advance
11
Réponse 4 / 6
Anonymous user
 
Hi, check if your firewall is blocking the connection, that's probably it. The detected node is normal, it's good that you're connecting.
--
A problem without a solution is not a problem.
6
claire912 Posted messages 5 Status Membre
 
I'm not very good with computers and I've allowed eMule in the exceptions, but the KAD connection is still pending.

What do I need to do for KAD to work? With the old version, it was working fine.

Claire
0
Anonymous user > claire912 Posted messages 5 Status Membre
 
It comes from your C+ box, it's complicated, you need to open the ports on your box (this is going to be too complicated for you). To make it simpler, download eMule Morph Xt, then click on preferences, go to connection, check random ports, then check
configure ports using upnp, then go to mode options (still in this menu), click on it, go to "emulespania", check enable support... check open/close ports... check add a rule... check activate upnp. Check remove port mapping... confirm by applying. Then everything is done automatically for opening and closing the ports on your box and your firewall, a must.
--
A problem without a solution is not a problem.
0
Anonymous user > claire912 Posted messages 5 Status Membre
 
I forgot to tell you that if you install Emule Morph, you don't have to uninstall your Emule, so you won't lose your credits or ongoing downloads; it should pass over normally.
--
A problem without a solution is not a problem.
0
claire912 > Anonymous user
 
Hi, it's me again

I did everything you said, and the problem remains the same except now I have two emules, both with the node.

Do you have another solution?


Claire
0
Anonymous user > claire912
 
Hi, normally it installs on it, the node means that a connection is being created or is trying to be created, so everything is fine, the node detection is normal. Once connected to the node, you also become a node for others (check on the Emule website what a node means, you seem to be doubting). Then disconnect eD2k, leave only Kad, run about fifteen different searches and wait 5 minutes, stay on transfer. I hope you are not on Wi-Fi; otherwise, Emule won't work or will work very poorly.
--
A problem without a solution is not a problem.
0
Réponse 5 / 6
xavatelo Posted messages 84 Status Membre 5
 
Hello, I would like to download eMule MorphXT 11.1, but I'm having trouble. Thank you for your help. Which one should I choose?
And how do I do it?
0
Réponse 6 / 6
yaya
 
Thank you Scorpax for your advice. It works well.
0