View original (French)

LowID on emule with numericable wifi router

Solved
marc_havok -  
nikko627 Posted messages 5 Status Member -
Hello,
I am with Numericable. I changed from a modem to the Netgear router in order to connect my laptop, my PS3, etc...
Everything works well but on eMule, I have a low ID.

After checking various forums, it's explained that I need to change the IP addresses.

When I do that, eMule goes back to high ID but neither my laptop nor my PS3 can connect to the internet.

After resetting everything, I regained internet access on my devices but I ended up with a low ID on eMule again.

Can someone guide me on how to make everything work? Apparently, it is possible, but the information I am getting is all over the place.
Since I am not a computer expert, I don't want to risk getting completely lost in messing things up and not being able to find my way back.

Thanks in advance to those who know the answer.
Configuration: Windows XP Internet Explorer 7.0

9 answers

  2. Anonymous user
     
    IT IS NECESSARY TO OPEN A HIGHWAY BETWEEN YOUR PC AND THE FARTHEST HOSTS: highid
    therefore ports listed in tcp udp preferably/connection
    a few boxes to check

    emules allowed in the firewall
    ports open in the router
    a restart of the mule

    only one firewall
    only one antivirus
    --
    never sneeze in front of a wall.
    believe me!
    1
  3. nikko627 Posted messages 5 Status Member 1
     
    I just opened ports 4661 and 4671 UDP and TCP on my router
    and configured eMule accordingly!
    It's working perfectly
    See you+
    1
  4. marc_havok
     
    Thank you for your responses and your help. It didn't work. I followed Marco Fortiche's tutorial for dummies, but nothing changed in the end; my two PCs can connect as well as my PS3, but my desktop has eMule showing Low ID.

    I don't quite understand why.
    I also created a rule on my firewall (Kaspersky), but that didn't change anything either.
    0
  6. marc_havok
     
    To provide more info about my setup, I have a Netgear CVG834 G modem router.
    A desktop PC and another laptop running Windows XP Pack 2. I also use a PS3 and an iTouch via Wi-Fi.

    And here is the setup for my desktop PC, the one using eMule.

    Windows IP Configuration

    Host Name . . . . . . . . . . : Havok_One
    Primary DNS Suffix . . . . . . :
    Node Type . . . . . . . . . . : Unknown
    IP Routing Enabled . . . . . . : Yes
    WINS Proxy Enabled . . . . . . : No

    Ethernet Card Local Area Connection:

    DNS Suffix specific to the connection :
    Description . . . . . . . . . . . : Marvell Yukon 88E8053 PCI-E Gigabit
    Ethernet Controller
    Physical Address . . . . . . . . : 00-18-F3-E0-3C-2F
    DHCP Enabled . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.0.11
    Subnet Mask . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.0.1
    DHCP Server. . . . . . . . . . . : 192.168.0.1
    DNS Servers . . . . . . . . . . : 82.216.111.123
    82.216.111.122
    82.216.111.124
    82.216.111.125
    Lease Obtained . . . . . . . . . . : Saturday, May 24, 2008 7:19:20 PM
    Lease Expires . . . . . . . . . . : Saturday, May 24, 2008 8:19:20 PM

    Ethernet Card Local Area Connection 2:

    Media Status . . . . . . . . . . : Media disconnected
    Description . . . . . . . . . . . : Marvell Yukon 88E8053 PCI-E Gigabit
    Ethernet Controller #2
    Physical Address . . . . . . . . : 00-18-F3-E0-63-13

    C:\Documents and Settings\Havok>

    Thank you in advance to those who can give me a hand.
    At worst, if it's really too complex, I admit that I prefer to be able to use the internet on all my machines rather than having a high ID mule with internet only on my desktop. But there you go.

    Thanks again to balulolo and marcofortiche for their help.
    0
  7. marc_havok
     
    Thank you balulolo.
    Well, something quite improbable is happening to me. My mule no longer has its eyes blindfolded (cool) but when I go to the Servers tab, in my info, I still have a Low ID. I thought that was impossible.

    I had already noted the correct TCP and UDP ports but it didn't change anything. For the rest, I admit I didn't fully understand your message.
    0
    1. Anonymous user
       
      look at Marco's post: proposal four
      once the mule is set up, restart it

      did you not understand what??

      --
      never sneeze in front of a wall.
      believe me!
      0
  8. marc_havok
     
    When you say a few checkboxes, all of a sudden I feel fragile.
    When you talk about proposal 4, is it to update the list of servers?
    0
  9. Anonymous user
     
    preference
    connection
    check all the boxes except:
    disabled
    connection at startup
    enter the speeds provided by the connection test
    and the port numbers given later by the test////////my link in post one

    yes for marcofortiche
    on emule you can also go to irc
    you connect at the bottom left and follow the discussions and you can ask questions
    --
    never sneeze in front of a wall.
    believe me!
    0
  10. marc_havok
     
    ok, thank you, I really feel like a big fool. I think I hadn't restarted my mule.
    Thank you very much for your help and also to marcofortiche. You guys have been really cool.

    Thanks again
    0