[fedora] SMART

 --------------------- Smartd Begin ------------------------ 

 
 /dev/sda :
    Prefailure: Raw_Read_Error_Rate (1) changed to 
      56, 57, 
    Usage: Hardware_ECC_Recovered (195) changed to 
      56, 57, 
    Usage: Temperature_Celsius (194) changed to 
      36, 39, 40, 
 
 **Unmatched Entries**
 Drive: DEVICESCAN, implied '-a' Directive on line 28 of file /etc/smartd.conf
 Problem creating device name scan list
 Device /dev/sda: ATA disk detected behind SAT layer
   Try adding '-d sat' to the device line in the smartd.conf file.
   For example: '/dev/sda -a -d sat'
 Device /dev/sdb: ATA disk detected behind SAT layer
   Try adding '-d sat' to the device line in the smartd.conf file.
   For example: '/dev/sdb -a -d sat'
 Device: /dev/sdc, NO MEDIUM present; skip device
 Device: /dev/sdd, NO MEDIUM present; skip device
 Device: /dev/sde, NO MEDIUM present; skip device
 Device: /dev/sdf, NO MEDIUM present; skip device
 Device: /dev/sdg, NO MEDIUM present; skip device
 Device: /dev/sdc, not ATA, no IDENTIFY DEVICE Structure
 Device: /dev/sdd, not ATA, no IDENTIFY DEVICE Structure
 Device: /dev/sde, not ATA, no IDENTIFY DEVICE Structure
 Device: /dev/sdf, not ATA, no IDENTIFY DEVICE Structure
 Device: /dev/sdg, not ATA, no IDENTIFY DEVICE Structure
 File /etc/smartd.conf line 28 (drive DEVICESCAN): Missing argument to -d Directive
 Valid arguments to -d Directive are: 
 ata, scsi, marvell, removable, sat, 3ware,N, hpt,L/M/N
 
 ---------------------- Smartd End -------------------------