9 réponses
Setting the time on o.d.m mysterious V DD99A:
Press the hour mode (by pressing the button on the right)
then place the watch in a horizontal position.
Press and hold the [set] button for 2 seconds to set the time.
Press [set] to switch between 12/24-hour format, and hold the [set] button for at least two seconds to quickly advance the hours.
The time format automatically changes from 24 hours to 12 hours (AM/PM) when you exceed 24 hours. Turn the watch over to set the minutes; the minute setting is similar to the hour setting.
There you go, it’s not rocket science!!!!!
Press the hour mode (by pressing the button on the right)
then place the watch in a horizontal position.
Press and hold the [set] button for 2 seconds to set the time.
Press [set] to switch between 12/24-hour format, and hold the [set] button for at least two seconds to quickly advance the hours.
The time format automatically changes from 24 hours to 12 hours (AM/PM) when you exceed 24 hours. Turn the watch over to set the minutes; the minute setting is similar to the hour setting.
There you go, it’s not rocket science!!!!!
Ouais, il faut attendre que l'heure s'affiche en noir sur fond blanc et après tu appuies derrière longtemps et quand ça clignote, tu rappuies la montre deux fois tant que ta date et l'heure ne sont pas bonnes. Désolé pour l'écriture, je vais manger.
Hello everyone,
First of all: 1- Display the time in black on a white background.
2- Press the back button for 2 seconds, then the time will blink.
3- Select the hour or minutes to change using the button on the side of the watch or to navigate between the date and the language.
4- Increase or decrease with the back button.
5- Complete everything when you're done by pressing the button on the side.
Hoping to assist you, have a great day everyone!!
First of all: 1- Display the time in black on a white background.
2- Press the back button for 2 seconds, then the time will blink.
3- Select the hour or minutes to change using the button on the side of the watch or to navigate between the date and the language.
4- Increase or decrease with the back button.
5- Complete everything when you're done by pressing the button on the side.
Hoping to assist you, have a great day everyone!!
Hello, I have a Breo watch too, I don't know how to set it, it's a very simple one that can go in the water, etc., thin, and on the back, I have two buttons that I have to press with a paperclip because they are too small, and I have A and M, so I don't understand your rear set, etc.
If someone could help me
Thank you very much
If someone could help me
Thank you very much
what the pdt and the set button are.