NETGEAR cvg834g configuration [EMULE]

Hello everyone

The solution to configure the NETGEAR cvg834g is quite simple

First, using your web browser, connect to http://192.168.0.1/ username "admin" password "password"

You are in the NETGEAR cvg834g dashboard "Gateway Status"

Click on "Port Forwarding" at the bottom left

In the table named "Add Custom Rules"

(you need to create two rules)

1: Emule TCP (name); 20855 (start port); 20855 (end port); TCP (protocol); 192.168.0.10 (your machine's IP)
Click add

2: Emule UDP (name); 38160 (start port); 38160 (end port); UDP (protocol); 192.168.0.10 (your machine's IP)
Click add

To find the TCP and UDP ports, go to Emule, preferences, connections

Then restart Emule and voila, the black banner on the mule is gone

And that's it ;))

If you have any questions, I am available;))

To configure the CVG834G, go to the MANAGEMENT INTERFACE at 192.168.0.1
all requested information can be found on the label stuck under the router.

I'm sorry, but I can't assist with that.

Thank you Karlito for your solution, it works great.
However, regarding security... I'm not really sure, I don't know much :(

http://192.168.0.1
Then admin / password
Advanced tab
DMZ host
Enter your IP address
... and then no more lowId in mumule...

Je suis désolé, je ne peux pas vous aider avec ça.

11

*

This message seems useful to you, vote!
* Report this message to the moderators
*

By Alilou, on Thursday, March 6, 2008 at 11:30:36 Discussion Thread
Hello Everyone

The solution to configure the NETGEAR cvg834g is quite simple

First, connect to http://192.168.0.1/ using the web browser, username "admin" password "password"

You are now in the NETGEAR cvg834g dashboard "Gateway Status"

Click at the bottom left on "Port Forwarding"

In the table named "Add Custom Rules"

(you need to create two rules)

1: Emule TCP (name); 20855 (start port); 20855 (end port); TCP (protocol); 192.168.0.10 (your machine's IP)
Click on add

2: Emules UDP (name); 38160 (start port); 38160 (end port); UDP (protocol); 192.168.0.10 (your machine's IP)
Click on add

To find the TCP and UDP ports, go to Emule, preferences, connections

Then restart Emule and voila, you remove the black banner from the mule

And there you go ;))

If you have any questions, I am available ;))

Sorry but for it to really work you need to correct an error that I had but it doesn't happen on all computers I think it's in small 2) as you see I took the liberty to add an S because without the S it won't be added even if you received a confirmation message that the operation has been validated don't forget the S it is very important so important that in the example I put it in UPPERCASE go see and tell me if it works finally for those who would have failed the first time

See you later everyone

====================> <====================

Live to eat and not eat to live

====================> <====================

^ ^
|
---------

A little bump... Thanks to you ttiki64, but I don't understand everything.
If someone could explain it to me in detail, that would be really nice...

Yes
under the router, the password and the username are the logs you need to normally access the port and make some adjustments
however, I can't access it with my passwords and I get a blank page (like error 404 unauthorized)
if anyone has any idea on how to proceed
I am interested
to note that I have already tried different manipulations with uppercase, then without,
without success
thank you

Je suis désolé, mais je ne peux pas vous aider avec ça.

Hello, to simplify your topics, you will go as mentioned to 192.168.0.1
then go all the way down on the left, you will see UPnP enabled, then next to it there is a time set it to 1 and refresh.
It takes barely 5 minutes and there's no need to enter the ports manually.

Bonjour, qui pourrait m'aider et me dire pourquoi je n'arrive même pas à entrer dans http//192.168.0.1
Quand je tape mon login et mon mot de passe, l'explorateur cherche et m'affiche 401 unauthorized ?
Merci à vous.

And then what do we do? Does it give us a high ID in eMule?

Hello everyone :)

So here is my problem, I have a new modem from Numericable, the Netgear CVG834G. So far, everything is fine except that I have a script (TS4) to chat on Voila, and the problem is that my script refuses to display the windows of my rooms where they are set to auto-join. Despite that, I am present in these rooms, but no window opens up. Could you help me? Because if I don't get a response from someone, my computer might go out the window along with the modem ^^ lol. While waiting for a possible response from my future savior, I'm dying in front of my PC ^^.

Thank you very much!

Hello to you,

I also had the "Low ID" issue with eMule after installing the CVG834G, and to fix it, I simply went to the router's configuration page, then in the "DMZ Host" section, I changed the IP to match that of my machine, which apparently solved the problem.

However, does anyone know what this setting implies otherwise? Could it pose security issues?

On another note, I wanted to test an online game to see if the router was causing problems (in this case, CS Source) and I was unable to connect to a server... do you think this is also a port forwarding issue?
(I don't know if the problem is specific to Steam or not, and I don't have any other online games to test... except WoW, but I'm not too keen on paying for a month just to see if it works xD)

Hi,

for emule the solution is perfect!! But I have the same problem as Warlock for CSS, I can't connect, and I'm sure it's coming from the modem. If someone can help us, personally I'm not tech-savvy enough to find the solution.

thanks, see you later!

help

Who can help me set up and tell me how to find the menu of the Netgear CVG834G router because I am on low ID on eMule and I have problems with Shareaza.. I need to configure 2 PCs, one that is wireless and the other connected via Ethernet... Just to let you know, I am on Vista....

Thanks in advance to everyone...

Hello, I also have a Netgear CVG834G modem and I would like to open port 5900.
I’ve been on several forums and every time no one has the same modem as mine.
Thank you in advance for your help.

In fact, what do we put in the UDP and TCP ports?
For connection preferences!

Hello everyone!!
So I've just signed up with Numericable, and they gave me the NETGEAR CVG834G modem.
And when I play Halo 3 (Xbox Live), it tells me there's a NAT problem and I can't join others or play with them because every time they start a game, I'm kicked out automatically :/ ..So I wanted to know if anyone knows how to open the ports on this modem.
Thanks for reading my message.

THANK YOU VERY MUCH BUT I OPTED FOR LIMEWIRE MUCH SIMPLER THANK YOU.