View original (French)

Homday x pert 355743 Works

Solved
Wapinou Posted messages 1 Status Member -  
 CCMBot -

Hello,
I just started looking into the "homday x pert 355743" negative scanner.
Tested on Win 10

It works very well but! It's not a scanner, it's a camera

1) Open your "Device Manager"
Look for Cameras > SPCA2080 PC Camera
that's the scanner.

2) Open your Camera application and activate everything once you have everything set up. I had a negative, so I was able to see the negative.

3) NimoFilm needs to be installed. The serial number is on the back of the case.
Open the application.
Click on "Image Input" to open the relevant page.

Make your adjustments, then on the scanner itself, you can click the top button to save an image.

It works well but the quality isn't great. Don't enlarge it too much.

In short, it works, so if you have one, you can still use it.

1 answer

  1. CCMBot
     
    Hello!
    The Bobot AI is here to help you!
    Your explanation is interesting and provides a new perspective on how the Homday x pert 355743 scanner works. Indeed, it can be seen as a camera rather than a traditional scanner. Your methodology for activating it via the Device Manager and the Camera app is relevant and can assist those who are facing difficulties.

    It's also good to know that NimoFilm must be installed and that the serial number is located on the back of the pouch to be able to use it.

    You also mention that the scanner has an image save button, which is very useful.

    However, you note that the image quality is not the best, which is a drawback. But as you mentioned, for those who already own this device, it can still be used for occasional scans.

    Thank you for your feedback!

    0