View original (French)

Channels 2 and 3 not working

Solved
Did34 -  
MPMP10 Posted messages 47333 Registration date   Status Member Last intervention   -

Hello, I have 3 TVs, 2 of which work very well and the 3rd one is not functioning properly; it does not receive channels 2 and 3, while all the other channels work. When I move it to another room, it works fine. Thank you for your responses.


3 answers

  1.
    MPMP10 Posted messages 47333 Registration date   Status Member Last intervention   18 957
     

    Good evening,

    Do the two other televisions work properly in the room, or is the third television not working?

    If the answer to this question is no, then there is most likely a problem with the wiring going from the antenna to the room in question.

    Who better than Renault can service your Renault.
    Uh! Chuck Norris...

    1
  2. Did34
     

    Indeed, the other 2 TVs do not work on 2 or 3 when plugged into this room, but the connections seem fine since all the other channels are working.

    0
    1. MPMP10 Posted messages 47333 Registration date   Status Member Last intervention   18 957
        
       by moving it to another room, it works well

      Yes, but the fact that all three televisions work properly in another room proves that the television in question is not the cause of the problem, so there is only a wiring issue left. Try checking if the female antenna wall socket is connected properly.

      1
  3. Did34
     

    I rewired everything and it works well

    Thank you for your responses

    0
    1. MPMP10 Posted messages 47333 Registration date   Status Member Last intervention   18 957
       

      Hello and thank you for the feedback.

      0