View original (French)

Tnt Sat Issues

Val -  
Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   -

Hello,

I am only receiving 5 channels on TNT Sat since last night; everything was working perfectly yesterday morning. I unplugged everything, still nothing changed with the television and HDMI cable, I reset and started a channel scan and still nothing. Where does the problem come from?


1 answer

Answer 1 / 1
Andy31200 Posted messages 26918 Registration date   Status Moderator Last intervention   12 199
 

Good evening,

Check precisely the alignment of the satellite dish

For the orientation of the dish, use this site:
https://www.dishpointer.com/
-Enter your full address on the left
-Select 19.2° East (Astra) from the list on the right
-Click on “Search!” next to your address,
-Zoom in on the map using the + button to clearly locate your house
-Place the target at the location of your dish by clicking and dragging, and use a landmark for orientation (tree, house), first in direction and then in elevation.
At the bottom right of the map, you have the elevation, azimuth, and the direction of rotation in degrees of the head in its bracket (cross-polarization adjustment) with the last line "LNB Skew," which is very important.
Also use the bar graphs on the decoder while communicating with someone in front of the screen by phone to fine-tune the adjustment, which should ideally be done with a satellite pointer.

I call a spade a spade *
     *in French in the text
0