View original (French)

AIO pump connection to motherboard

Dwkil -  
Redbart Posted messages 20952 Registration date   Status Member Last intervention   -
Hello,

I purchased a Cooler Master MasterLiquid ML240L V2 and on my motherboard, I only have CPU_Fan and Sys_fan. I would like to know where to connect the pump which has a 3-pin connector and the fans of the pump which have 4 pins. I want to connect the pump to Sys_fan and change the settings in the BIOS to set the pump to full speed.

Can you please help me?

My motherboard: https://www.amazon.fr/gp/product/B07GYRW53K/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

My AIO: https://www.amazon.fr/gp/product/B084LLD3PH/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

3 answers

  1.
    Redbart Posted messages 20952 Registration date   Status Member Last intervention   3 382
     
    Hello
    the speed of the fans must be controlled and managed, so cpu_fan 4 pins

    the pump at max speed, powered by a 2/3 pins adapter onto a molex

    see the videos on YT

    --
    Take the time to comment!
    A thank you is appreciated.
    Mark as resolved if your issue has been solved. I use the informal 'tu' with everyone.
    Vaccinate, vaccinate, vaccinated.
    0
    1. Dwkil
       
      Good evening, it is powered directly from the sys_fan, it does not have a molex connector..

      Thank you for your quick response :)
      0
  2. Redbart Posted messages 20952 Registration date   Status Member Last intervention   3 382
     
    The power supply has molex connectors where you can tap into 12V

    --
    Take the time to comment!
    A thank you is appreciated.
    Mark as resolved if your issue has been solved. I address everyone informally.
    Vaccinate, vaccinate, vaccinated.
    0
    1. Dwkil
       
      Hi, yes I know but the problem is that my pump doesn’t have a molex cable.
      0