View original (French)

Magnetoscope : audio sans image

sab1971_0272 Posted messages 1 Status Membre -  
MPMP10 Posted messages 46991 Registration date   Status Membre Last intervention   -
Hello everyone,
I'm desperately trying to connect my Bluesky VCR to a Schaublorenz TV... I'm using a SCART cable: I have sound but no picture.
I've tried 3 SCARTs so the problem isn't there.
The VCR was tested at the store where I bought it... I've also tried several original VHS tapes.... I've attempted to clean the playback heads... to no avail.
So I suppose it must be a compatibility issue between the VCR and the TV.
Thank you for your help!
Sam

2 réponses

Réponse 1 / 2
glandu Posted messages 25500 Registration date   Status Contributeur Last intervention   4 086
 
Hello and welcome as a new member. If you’re not a TV technician, you need to be pragmatic and proceed by elimination. You still have to test your television, so take your SCART cables and your VCR and go to a friend's place to test it on their TV.
NB: Be sure to use the VCR output to the TV input (in).

--
"Donkeys change their minds, not idiots."
Remember to mark your message as "resolved" if that’s the case.
0
Réponse 2 / 2
MPMP10 Posted messages 46991 Registration date   Status Membre Last intervention   18 844
 
Hello,
Swap the SCART cable to see...
Curiously! (it's from experience...) when you flip the SCART cable, the picture returns.
https://www.electroguide.com/question/son-mais-pas-dimage-sur-tv-proline-l2833-hd
--
The enemy is stupid: he thinks we are the enemy when it's actually him!
Pierre Desproges
0