View original (French)

BIOS Startup Conflict

Solved
NeoCloud -  
 NeoCloud -
Hello everyone,

I'm facing an issue, every time I start my desktop computer I get this message

"Please enter setup to recover BIOS settings.
After setting up Intel(R) Optane memory or the RAID configuration was built, SATA Mode selection must be changed to RAID mode to avoid unknown issues."

I searched in various forums without any luck :(

How can we resolve this issue?

Thank you in advance :)

1 answer

  1.
    jfmimi Posted messages 13734 Registration date   Status Contributor Last intervention   1 929
     
    Hello
    go to the Bios and reset the values to default
    usually press "F5" and then "F10" to save and exit

    0
    1. NeoCloud
       
      Good evening @jfmimi,

      Yes, I had tested this option to reset the BIOS to default but it still gives me this error :(
      0
    2. jfmimi Posted messages 13734 Registration date   Status Contributor Last intervention   1 929 > NeoCloud
       
      look in the BIOS to ensure the disk mode is set to "AHCI" and not "RAID"
      1