Disque dur externe sans aucune données S.M.A.R.T

Résolu/Fermé
kaskaï Messages postés 14 Date d'inscription samedi 11 septembre 2010 Statut Membre Dernière intervention 14 mars 2024 - Modifié le 28 oct. 2020 à 12:20
kaskaï Messages postés 14 Date d'inscription samedi 11 septembre 2010 Statut Membre Dernière intervention 14 mars 2024 - 28 oct. 2020 à 15:55
Bonjour,


Je ne sais pas trop comment interpréter l’absence d'infos délivrées par CrystalDiskInfo tandis que HWiNFO détecte correctement :
S.M.A.R.T. Feature: Present, Active
Je n'ai donc pas tellement de moyen d'apprécier l'état de santé de mon DD.


Voici néanmoins les données collectées par HWiNFO :
General Information                                                             
Drive Controller: Serial ATA 3Gb/s @ 3Gb/s <-> USB
Host Controller: Toshiba America Info. Systems, PID=D011
Drive Model: TOSHIBA MQ01UBD050
Drive Firmware Revision: AX101U
Drive Serial Number: 8635TOINT
World Wide Name: 0000
Drive Capacity: 476,940 MBytes (500 GB)
Media Rotation Rate: 5400 RPM
Nominal Form Factor: 2.5"
ATA Major Version Supported: ATA/ATAPI-5, ATA/ATAPI-6, ATA/ATAPI-7, ATA8-ACS
ATA Transport Version Supported: SATA 2.6

Drive Geometry
Number of Cylinders: 16383
Number of Heads: 16
Sectors Per Track: 63
Number of Sectors: 16514064
Total 32-bit LBA Sectors: 268435455
Total 48-bit LBA Sectors: 976773168
Logical Sector Size: 512 Bytes
Cache Buffer Size: 8192 KBytes

Transfer Modes
Sectors Per Interrupt: Total: 16, Active: 16
Max. PIO Transfer Mode: 4
Multiword DMA Mode: Total: 2, Active: -
Singleword DMA Mode: Total: 2, Active: -
Ultra-DMA Mode: Total: 5 (ATA-100), Active: 5 (ATA-100)
Max. Multiword DMA Transfer Rate: 16.7 MBytes/s
Max. PIO with IORDY Transfer Rate: 16.7 MBytes/s
Max. PIO w/o IORDY Transfer Rate: 16.7 MBytes/s
Transfer Width: 16-bit
Native Command Queuing: Supported, Max. Depth: 32
TRIM Command: Not Supported

Device flags
Fixed Drive: Present
Removable Drive: Not Present
Magnetic Storage: Present
LBA Mode: Supported
DMA Mode: Supported
IORDY: Supported
IORDY Disableable: Supported

Features
Write Cache: Present, Active
S.M.A.R.T. Feature: Present, Active
Security Feature: Present, Inactive
Removable Media Feature: Not Present, Disabled
Power Management: Present, Active
Advanced Power Management: Present, Active
Packet Interface: Not Present, Disabled
Look-Ahead Buffer: Present, Active
Host Protected Area: Present, Enabled
Power-Up In Standby: Not Suppported, Inactive
Automatic Acoustic Management: Not Suppported, Inactive
48-bit LBA: Supported, Active
Host-Initiated Link Power Management: Supported
Device-Initiated Link Power Management: Supported, Disabled
In-Order Data Delivery: Not Supported
Hardware Feature Control: Not Supported
Software Settings Preservation: Supported, Enabled
NCQ Autosense: Not Supported
Link Power State Device Sleep: Not Supported
Hybrid Information Feature: Not Supported
Rebuild Assist: Not Supported
Power Disable: Not Supported
All Write Cache Non-Volatile: Not Supported
Extended Number of User Addressable Sectors: Not Supported
CFast Specification: Not Supported
NCQ Priority Information: Not Supported
Host Automatic Partial to Slumber Transitions: Not Supported
Device Automatic Partial to Slumber Transitions: Not Supported
NCQ Streaming: Not Supported
NCQ Queue Management Command: Not Supported
DevSleep to Reduced Power State: Not Supported
Out Of Band Management Interface: Not Supported
Extended Power Conditions Feature: Not Supported
Sense Data Reporting Feature: Not Supported
Free-Fall Control Feature: Not Supported
Write-Read-Verify Feature: Not Supported

Security
Security Feature: Supported
Security Status: Disabled
Security Locked: Disabled
Security Frozen: Disabled
Enhanced Security Erase: Supported
Sanitize Feature: Not Supported
Sanitize Device - Crypto Scramble: Not Supported
Sanitize Device - Overwrite: Not Supported
Sanitize Device - Block Erase: Not Supported
Sanitize Device - Antifreeze Lock: Not Supported
Device Encrypts All User Data: Not Supported
Trusted Computing: Not Supported

Device Statistics
Lifetime Power-On Resets: 1694
Power-on Hours: 15566
Logical Sectors Written: 394478807
Logical Sectors Read: 1103663182
Number of Write Commands: 1487669
Number of Read Commands: 12536766

Overlimit Shock Events: 12

Spindle Motor Power-on Hours: 878
Head Flying Hours: 156
Head Load Events: 24111
Number of Reallocated Logical Sectors: 0
Read Recovery Attempts: 0
Number of Mechanical Start Failures: 0

Number of Reported Uncorrectable Errors: 0
Resets Between Command Acceptance and Completion: 339

Current Temperature: 27 °C
Average Short Term Temperature: 25 °C
Average Long Term Temperature : 25 °C
Operating Temperature Range: 5 - 55 °C
Lifetime Temperature: 15 - 39 °C
Lifetime Average Short Term Temperature: 21 - 31 °C
Lifetime Average Long Term Temperature: 22 - 26 °C
Time in Under-Temperature: 0 minutes
Time in Over-Temperature: 0 minutes

Number of Hardware Resets: 20168
Number of Interface CRC Errors: 0

Used Endurance Indicator: 25%



Configuration: Windows / Chrome 86.0.4240.101
A voir également:

2 réponses

jfmimi Messages postés 13734 Date d'inscription mercredi 12 décembre 2018 Statut Contributeur Dernière intervention 23 novembre 2022 1 890
28 oct. 2020 à 12:44
Bonjour
votre " crystal disk info " n'est pas du tout a jour
version 5.2.2 au lieu de 8.8.9
Vous avez également " Hard Disk Sentinel " avec des résultats plus détaillés sur le nombre de secteurs détériorés et le pourcentage de défectuosité du HDD/SSD. a Télécharger ici
1
kaskaï Messages postés 14 Date d'inscription samedi 11 septembre 2010 Statut Membre Dernière intervention 14 mars 2024 7
28 oct. 2020 à 15:55
Je ne connaissais pas Hard Disk Sentinel; merci pour le tuyau. Les données S.M.A.R.T sont correctement détectées et le disque est déclaré en excellente condition.
La maj de CrystalDiskInfo n'a rien changé
0