View original (French)

No program selection. echosonic receiver

Solved
halima -  
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   -
Hello, I bought an echosonic receiver a month ago and it was working well. Now when I turn it on, it shows me the message 'no program selection'. I don't know how to solve this problem. Thank you.

5 réponses

Réponse 1 / 5
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   12 197
 
Hello,
Try unplugging everything, HDMI cables, antenna, and power plug, wait five minutes, and then plug them back in.
If there's no result and if you have access to the menu, perform a "reset" or "factory reset" or "initial setup" (see menu), but you will have to redo the entire installation and settings.

--
I call a cat a cat *
     *in French in the text
0
halima
 
Thank you very much.
0
Réponse 2 / 5
matousurnet Posted messages 1179 Registration date   Status Membre Last intervention   506
 
Hello,

Otherwise, warranty return (since purchased a month ago)
0
Réponse 3 / 5
halima
 
Thank you very much.
0
Réponse 4 / 5
halima
 
Finally, I was able to solve the problem thanks to the settings and parameters of the channels. Thank you very much.
0
Réponse 5 / 5
Andy31200 Posted messages 26918 Registration date   Status Modérateur Last intervention   12 197
 
You're welcome, and feel free to come back if you have any other questions.

--
I call a spade a spade *
     *in French in the text
0