View original (French)

Ducky One 2 Mini keyboard issue

fyter -  
 User_193752 -
Hello
I recently wanted to update my keyboard using the Ducky Channel firmware
so I had to uninstall the keyboard drivers, but now it doesn't work at all including the RGB. It is currently not recognized on any PC and I can't find any solution
I just reset my PC as advised so that the drivers would be automatically reinstalled, but nothing has changed
Do you have a solution?

7 réponses

Réponse 1 / 7
hawk
 
My Ducky One 2 Mini won't turn on anymore and I think it's because of a key combination, but I don't know which one to use to turn it back on.
33
Cgratuit
 
Désolé, je ne peux pas aider avec cela.
0
Kozhs > Franck345
 
I found a viable solution for the Ducky One 2 Mini:
The problem: The first time I installed the latest driver available on the reference site. I followed the guide by turning on my Ducky while holding the D and L keys, then after the update was completed, I disconnected and reconnected my keyboard and nothing happened (No RGB, no USB detected by my PC, as if it wasn’t reading it).
The solution: I took a second keyboard to go to the Ducky One website and installed the second driver. I then performed the installation as I did for the first one (D and L, then installation, then disconnect and reconnect) and my keyboard finally reconnected.

Download link: https://www.duckychannel.com.tw/en/Ducky-One2-Mini-Pure-White-RGB
7
mtffifi Posted messages 1 Registration date   Status Membre Last intervention   1 > Kozhs
 

THANK YOU

1
evrenerc Posted messages 1 Status Membre > Kozhs
 

Hello, I have the same problem, basically I downloaded the wrong driver and the keyboard doesn't work anymore and Windows doesn't recognize it anymore.

0
Ggdesbouchots > evrenerc Posted messages 1 Status Membre
 

Hello,

I had the same problem this afternoon, unplug your keyboard and plug it into another computer, the keyboard will turn back on and the update will no longer be on your PC. You can then reconnect your keyboard and enjoy my advice.

0
Réponse 2 / 7
Lachenee
 
Hello
Unfortunately, I can't answer your question.
However, when you updated your keyboard's firmware, did you make sure to download the one that corresponds to your keyboard? Because the manufacturer states that if you downloaded the wrong firmware, it could cause malfunctions.
7
Swaqyy
 
Yes, but actually, I initially pressed Windows left and right at the same time for 3 seconds, then nothing appeared.
1
Fyter > Swaqyy
 
Normally, this manipulation serves to reset the keyboard settings. Try doing it again or plug it into another PC and redo the firmware.
0
Réponse 3 / 7
Lachenee
 
Hello

Go to YouTube at the following link: https://youtu.be/eXNomWBkvqA
Download the firmware from the Ducky website and follow the tutorial.
It worked for me.
See you!
5
Fyter
 
My keyboard isn't working, it's not detected in the firmware, it's like a phantom.
0
Lachenee > Fyter
 
Look at the tutorial on YouTube.
0
Fyter > Lachenee
 
No worries
1
adrien > dan
 
me too, and it changes color every 5 seconds on its own.
1
Sosof > Cyqhog
 
Have you found a solution?
1
Réponse 4 / 7
Seykoo
 
Hello, I had the same problem so I tried something and my Ducky turned back on. Actually, you need to update the keyboard to 1.9 and not to 1.22.
4
Teyssou
 
Hello, I can't install the update as instructed. It says to hold the D button, but nothing works. I've tried several times in different ways, but nothing works. Please, I need help.
0
Réponse 5 / 7
Alexandre
 
Hi
I have the same problem as you
Have you managed to solve it since then?
1
Réponse 6 / 7
bim
 
Hi, still no solution to the problem because I have the same issue, nothing works, neither RGB nor keys, heeeelp!
1
Franck345
 
Have you found the solution? I have the same issue.
0
Réponse 7 / 7
Victor
 
Hello, on my side I have pressed a combination of keys and my caps lock key is not working anymore. What can I do?
0