View original (French)

Connecting Stanmore 2 speaker to LG TV

Solved
Titicamer Posted messages 16 Status Member -  
gugu01 Posted messages 15669 Registration date   Status Contributor Last intervention   -
Hello, I can't connect my Stanmore 2 speaker to my LG TV. I've connected my TV to the speaker using an RCA cable, but there's no sound. Do I need an amplifier between the television and the speaker? Thank you in advance for your answers.
Thierry

24 answers

  • 1
  • 2
  1. gugu01 Posted messages 15669 Registration date   Status Contributor Last intervention   4 702
     
    Hello to both of you,

    The RCA connectors don't seem to be fully pushed into your converter.

    They are angled, which shouldn’t be the case, and there’s too much visible “part,” so push a little without being too rough.
    Check if there’s the same issue on the speaker side.
    Being new, it might be a bit stiff depending on the manufacturing precision.
    Auto message
    If you are here, it means you don’t know, so... ;-)
    Mini Consideration for the volunteers who are helping you: Reply, Respect, Politeness,...
    3
    1. Titicamer Posted messages 16 Status Member 1
       
      The RCA are well inserted. I pressed a bit harder but it doesn't change anything.
      0
      1. gugu01 Posted messages 15669 Registration date   Status Contributor Last intervention   4 702 > Titicamer Posted messages 16 Status Member
         
        In the picture, it looks like something is missing.

        Don't you have a simple jack-to-jack cable to connect the case's headphone output to your speaker's jack input?
        Not a solution, but for testing.
        0
    2. Titicamer Posted messages 16 Status Member 1
       
      Thank you very much for your help. I changed the RCA cable and it works. Thanks again.
      0
      1. gugu01 Posted messages 15669 Registration date   Status Contributor Last intervention   4 702 > Titicamer Posted messages 16 Status Member
         
        You're welcome, it's a good team effort ;-)

        I bet this other cable goes further into the converter's sockets, right?
        0
  • 1
  • 2