View original (French)

Disassembling Packard Bell EasyNote LV44HC PC

Tom_0133 Posted messages 5 Status Member -  
glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   -
Hello, I bought an EasyNote laptop a few years ago and it overheats a lot. I would like to disassemble my PC to access the fan, but I can only reach another part of the computer; I don't know how to remove the cover.
Thank you very much

2 answers

  1.
    glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 585
     
    Good evening,
    You have a video, it's about disassembling the keyboard, but the procedure is the same for accessing the fan.
    In my opinion, you probably haven't removed all the screws securing the lower cover.
    The heatsink also needs to be checked, just to be thorough!
    It's HERE.
    Best regards.

    The one who does not bring joy upon arriving always brings joy upon leaving!
    Breizh a tao
    2
  2. Tom_0133 Posted messages 5 Status Member
     
    Good evening, thank you for your response, but while trying to disassemble the keyboard, one part is stuck to another part of the DVD drive. Do you know how to fix this? Thank you.
    0
    1. glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 585
       
      Normally, if you have watched the video carefully, when all the screws are removed, you only have the cables to disconnect, the touchpad and keyboard, to take everything out; nothing should be "stuck" as you indicated.
      You can possibly take a picture of what you want to point out, for example.
      See you later.
      0
    2. Tom_0133 Posted messages 5 Status Member
       
      Thank you for your response, but I finally realized that it was screws I had forgotten to remove, thanks.
      0
    3. Tom_0133 Posted messages 5 Status Member > glg29 Posted messages 29751 Registration date   Status Contributor Last intervention  
       
      Do you know if we can take apart the fan to clean it thoroughly?
      0
    4. glg29 Posted messages 29751 Registration date   Status Contributor Last intervention   4 585 > Tom_0133 Posted messages 5 Status Member
       
      I had a feeling there must be a screw left somewhere!!!
      I think you should be able to remove the fan; it’s possible that the radiator comes off with it. There should be screws to take out as well; it should be fixed to the motherboard.
      See you!
      0
    5. Tom_0133 Posted messages 5 Status Member > glg29 Posted messages 29751 Registration date   Status Contributor Last intervention  
       
      Hello, do you have a assembly video? I'm struggling to put the ribbons back.
      0