PC won't start when adding RAM
Solved
mathieu258
Posted messages
3
Status
Membre
-
mathieu258 Posted messages 3 Status Membre -
mathieu258 Posted messages 3 Status Membre -
Hello,
I recently installed new RAM sticks (Corsair CMV8GX3M2A1333C9 Value Select 8GB (2x4GB) DDR3 1333 Mhz CL9 memory for desktop computer) to upgrade from 8 GB to 16 GB, however when I install them the PC restarts in a loop without any image, it just beeps. Can you help me? Thank you in advance.
Operating System
Windows 10 (X64) 1803
Installation date: 13/05/2018
Processor
Intel Core i5 3570K clocked at 3.40 GHz
Measured frequency (core0): 3.70 GHz
Number of cores: 4 physical, 4 logical
Socket: Socket 1155 LGA
CPU temperature (core 0): 31 °C
Motherboard
MSI Z77A-G45 (MS-7752) 1.0
Motherboard serial number: To be filled by O.E.M.
SKU Number: To be filled by O.E.M.
BIOS version: V2.7
Date: 24/10/2012
Chipset
North Bridge: Intel Ivy Bridge
Revision ID: 09
South Bridge: Intel Z77
Revision ID: 04
Memory
8 GB total memory of type DDR3 at 666.54 MHz
Memory timings: 9.0 clocks-9 clocks-9 clocks-24 clocks-1 TT
4 GB Kingston stick
Max frequency: 667 MHz
Bandwidth: PC3-10700
4 GB Kingston stick
Max frequency: 667 MHz
Bandwidth: PC3-10700
Graphics Card
NVIDIA GeForce GTX 670
Installed DirectX version: 11.0
GPU frequency: 324 MHz
GPU memory frequency: 324 MHz
Hard Drive
WDCWD10EZEX-22BN5A0 hard drive of 931.51 Go SATA III
Firmware: 01.01A01
SATA version: SATA Rev 2.6
Serial number: WD-WCC3F4JY86S7
M4-CT064M4SSD2 SSD of 59.63 Go SATA III
Firmware: 040H
SATA version: SATA Rev 2.6
Serial number: 000000001206091945B0
Optical Drives
ASUS DRW-24B5ST
Type: DVD+R/DL Recorder
Firmware version: 1.00
Firmware date: 2011-09-30
Network
Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Adapter type: ethernet
Software Loopback Interface 1
Adapter type: Loopback
Multimedia Cards
Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller
NVIDIA Corporation GK104 HDMI Audio Controller
Configuration: Windows / Firefox 65.0
I recently installed new RAM sticks (Corsair CMV8GX3M2A1333C9 Value Select 8GB (2x4GB) DDR3 1333 Mhz CL9 memory for desktop computer) to upgrade from 8 GB to 16 GB, however when I install them the PC restarts in a loop without any image, it just beeps. Can you help me? Thank you in advance.
Operating System
Windows 10 (X64) 1803
Installation date: 13/05/2018
Processor
Intel Core i5 3570K clocked at 3.40 GHz
Measured frequency (core0): 3.70 GHz
Number of cores: 4 physical, 4 logical
Socket: Socket 1155 LGA
CPU temperature (core 0): 31 °C
Motherboard
MSI Z77A-G45 (MS-7752) 1.0
Motherboard serial number: To be filled by O.E.M.
SKU Number: To be filled by O.E.M.
BIOS version: V2.7
Date: 24/10/2012
Chipset
North Bridge: Intel Ivy Bridge
Revision ID: 09
South Bridge: Intel Z77
Revision ID: 04
Memory
8 GB total memory of type DDR3 at 666.54 MHz
Memory timings: 9.0 clocks-9 clocks-9 clocks-24 clocks-1 TT
4 GB Kingston stick
Max frequency: 667 MHz
Bandwidth: PC3-10700
4 GB Kingston stick
Max frequency: 667 MHz
Bandwidth: PC3-10700
Graphics Card
NVIDIA GeForce GTX 670
Installed DirectX version: 11.0
GPU frequency: 324 MHz
GPU memory frequency: 324 MHz
Hard Drive
WDCWD10EZEX-22BN5A0 hard drive of 931.51 Go SATA III
Firmware: 01.01A01
SATA version: SATA Rev 2.6
Serial number: WD-WCC3F4JY86S7
M4-CT064M4SSD2 SSD of 59.63 Go SATA III
Firmware: 040H
SATA version: SATA Rev 2.6
Serial number: 000000001206091945B0
Optical Drives
ASUS DRW-24B5ST
Type: DVD+R/DL Recorder
Firmware version: 1.00
Firmware date: 2011-09-30
Network
Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Adapter type: ethernet
Software Loopback Interface 1
Adapter type: Loopback
Multimedia Cards
Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller
NVIDIA Corporation GK104 HDMI Audio Controller
Configuration: Windows / Firefox 65.0
