Windows 7 - Driver not installed (code 28)

Re

it's a wifi adapter that you installed on a desktop PC

download this driver to your desktop click here

it's a zipped file, you need to unzip it with 7zip (for example)

link >> https://www.7-zip.org/

PS: take the 64 bits for your PC

open the unzipped file and run the SETUP.EXE as administrator (right-click)

if you need the driver for wired connection (Ethernet) click here

let me know how it goes

@+

Hello,

Download this one --> TL-WN951
and place it in your documents.

Right-click on --> TL-WN951_V3_130529.zip
Select --> 7Zip
Choose --> extract to "TL-WN951_V3_130529\"

Go to Device Manager.
Right-click on the device
Update driver
Browse my computer for drivers
Choose from a list of drivers...
Have Disk
Browse
Go to your documents
Go to the unzipped driver folder --> TL-WN951_V3_130529
Folder --> Drivers Files
Folder --> Windows 7 64bit
Select the file --> netathrx.inf and OK.
Restart.

--
The human being is at its best when things are at their worst.

re

is your adapter not properly inserted in its slot?

check this page to see if it’s the same >> https://www.tp-link.com/fr/support/download/tl-wn951n/#Driver

can’t you connect via Ethernet (cable)?

would reinstalling Windows 10 and wiping out 7 fix my driver problem or not at all?

I don’t see a driver for W10 for this adapter...

@+

--
the radiation level is higher at the employment office than at Chernobyl

re

post 1 screenshot of your device manager >> network card

https://www.commentcamarche.net/infos/25913-ccm-inserer-une-image-dans-une-discussion/

@+

--
the radiation level is higher at the employment office than in Chernobyl

re

install the Chipset driver click here

and the one for the Ethernet connection click here

once it's done, repost a screenshot of your device manager

@+

--
the radiation level is higher at the unemployment office than at Chernobyl

After installing the Chipset:
Try these 3 drivers:
--> USB
--> MEI
--> Ethernet

Go back to the Device Manager:
Provide the hardware IDs of the remaining problematic devices
Look at this --> Find the identification number of a device
Post the IDs in your next message.

re

for this one >> Ethernet Controller - Hardware Ids:

PCI\VEN_8086&DEV_1503&SUBSYS_849C1043&REV_05

download this driver to your desktop click here

@+

--
the radiation level is higher at the employment office than at Chernobyl

I installed it but no change :/

Do you still have the yellow ? in the device manager?

@+

re

ok, for this one >> Network Controller - Hardware Ids:

PCI\VEN_168C&DEV_0023&SUBSYS_3071168C&REV_01

download this driver to your desktop click here

unzip it to ultimately select this file >> netathwx.inf

let us know how that goes

@+

--
the radiation level is higher at the unemployment office than at Chernobyl

re

If I understand correctly, it's not* the dev id .exe that you need to download.

If it's the dev id.exe that you need to download

then you have to unzip it and follow the instructions in this message from Kaneagle to reach the file >> netathwx.inf and click on OK

@+

--
the radiation level is higher at the employment center than at Chernobyl

re

I don't have a zip file, it's just an .exe which ultimately tells me error device not found

You have to right-click on it and choose 7zip >> extract to...

@+

--
The radiation level is higher at the job center than at Chernobyl.

Hello,
TP-LINK TL-WN951N Network Card
Intel Core i7-2600K (3.4 GHz) CPU
ASUS P8Z68-V GEN 3 Motherboard
it's a x64

re

did you see this message from Kaneagle? >> https://forums.commentcamarche.net/forum/affich-35397890-windows-7-driver-non-installe-code-28#15

@+

--
the radiation level is higher at the employment office than at Chernobyl

I repost here just in case:

screenshot of the device manager https://imgur.com/a/RB3J9Te

Ethernet Controller - Hardware Ids:

PCI\VEN_8086&DEV_1503&SUBSYS_849C1043&REV_05
PCI\VEN_8086&DEV_1503&SUBSYS_849C1043
PCI\VEN_8086&DEV_1503&CC_020000
PCI\VEN_8086&DEV_1503&CC_0200

Network Controller - Hardware Ids:

PCI\VEN_168C&DEV_0023&SUBSYS_3071168C&REV_01
PCI\VEN_168C&DEV_0023&SUBSYS_3071168C
PCI\VEN_168C&DEV_0023&CC_028000
PCI\VEN_168C&DEV_0023&CC_0280

Unknown Device - Hardware Ids:

USB\VID_0CF3&PID_3000&REV_0200
USB\VID_0CF3&PID_3000

re

wow, thanks for your patience.. a thank you feels too weak.. problem solved, I've got the wifi back, again THANK YOU to both of you for your time and patience, really top notch..

no worries for the help :), we were happy to help

let me know if you have any ? or /!\ yellow icons in the device manager

@+

--
the radiation level is higher at the employment agency than at Chernobyl

re

/!\ always on Ethernet and unknown device ^^'

I will look for it :)

@+

--
the radiation level is higher at the unemployment office than at Chernobyl

re

for this one >> Ethernet Controller - Hardware Ids:

PCI\VEN_8086&DEV_1503&SUBSYS_849C1043&REV_05

if you no longer have it on your desktop, download this driver again click here

it's a EXE that you need to unzip with zip >> extract to

follow the usual procedure to update your device

open the unzipped file >> PROXGB >> Winx64 >> NDIS62 >> ixe62x64.inf dated 05/15/2013

let us know what happens

@+

re

and for this one >> Unknow Device - Hardware Ids:

USB\VID_0CF3&PID_3000&REV_0200

download this driver to your desktop click here

it's a zipped driver, so the same procedure as before

you open the unzipped file >> qualcomm_atheros_bigfootnetworks_killer_6.1.0.590_win7_8_64bit >> and run the SETUP.EXE as administrator (right click)

let us know how it goes

@+

--
the radiation level is higher at the employment office than in Chernobyl

If it doesn't work for the Unknown Device:
Try this one --> Atheros

--
Human beings are at their best when things are at their worst.