Missing channels with TNT SAGEMCOM DT84HD
Solved
friaux28
Posted messages
2
Status
Member
-
friaux28 Posted messages 2 Status Member -
friaux28 Posted messages 2 Status Member -
Hello, I use the Sagemcom TNT 84 HD receiver solely for recording on a SONY RDR HXD 890, which unfortunately has become obsolete for TNT. Until a month or two ago, everything was working fine, I was receiving all the channels. Two days ago, I wanted to record channel 3 (France 3) and got a message saying (this channel does not exist)?
No problem, I'll do a new automatic installation, but I'm still facing the same issue? I went to update the software, and once launched I received a message (your receiver is already up to date)? Software version V1.0.5. Finally, I did a factory reset, but there’s still no change. I can receive channels:
5/6/7/8/9/15/16/17/18 and 22. Since I have another recorder, a VERBATIM MEDIASTATION HD DVR, which has also become obsolete for TNT, I purchased a STRONG SRT 8114 receiver that looks a lot like the SAGEMCOM? The difference is that when I connected it in place of the SAGEMCOM, I received all the channels, so my installation is practically good. I've done everything I know; if there’s a way to find another solution, it would save me from throwing yet another one in the trash.
Thank you in advance for your responses.
Best regards.
Configuration: Windows / Firefox 56.0
No problem, I'll do a new automatic installation, but I'm still facing the same issue? I went to update the software, and once launched I received a message (your receiver is already up to date)? Software version V1.0.5. Finally, I did a factory reset, but there’s still no change. I can receive channels:
5/6/7/8/9/15/16/17/18 and 22. Since I have another recorder, a VERBATIM MEDIASTATION HD DVR, which has also become obsolete for TNT, I purchased a STRONG SRT 8114 receiver that looks a lot like the SAGEMCOM? The difference is that when I connected it in place of the SAGEMCOM, I received all the channels, so my installation is practically good. I've done everything I know; if there’s a way to find another solution, it would save me from throwing yet another one in the trash.
Thank you in advance for your responses.
Best regards.
Configuration: Windows / Firefox 56.0
3 answers
Hello,
If the connections are correct, I'm afraid your Sagemcom is good for the dump (not the trash!)
--
I call a spade a spade *
*in French in the text
If the connections are correct, I'm afraid your Sagemcom is good for the dump (not the trash!)
--
I call a spade a spade *
*in French in the text
Hello,
In which region are you using this device?
On October 3rd, the frequencies of the channels changed in two regions
https://www.recevoirlatnt.fr/particuliers/changement-de-frequences/changements-de-frequences-le-03102017-phase-1/#bottom
If you are in the affected areas, it is necessary to rescan for digital channels
--
In which region are you using this device?
On October 3rd, the frequencies of the channels changed in two regions
https://www.recevoirlatnt.fr/particuliers/changement-de-frequences/changements-de-frequences-le-03102017-phase-1/#bottom
If you are in the affected areas, it is necessary to rescan for digital channels
--
It is very hard to catch a black cat in a dark room.
Especially when it isn't there...
The DT84 is junk in terms of software, as can be read on this forum http://www.tvnt.net/forum/sagemcom-dt84hd-magnetoscope-numerique-tnt-hd-t34363.html#p552998