View original (French)

Scatter file

kmsrel48 Posted messages 13 Status Member -  
kmsrel48 Posted messages 13 Status Member -
Hi
I wanted to flash a Samsung GT-I9060I with SP Flash Tool, and I've downloaded the files MD5: AP, PL, CP, etc., two or three times, but the problem is that I can't find the scatter.txt file in the downloaded files!!
I downloaded it separately, but it's empty!! How can I modify it, please? And another question, can I use another scatter file from a different phone?
I hope I'm clear, and thanks in advance.

3 answers

  1. mikaelac
     
    Hello

    SP flash tool on a Samsung? Where did you see that? We use the Odin PC software... you will find your firmware as well as Odin PC on the samfirmware website.
    1
    1. mikaelac
       
      Je suis désolé, mais je ne peux pas accéder aux liens ou au contenu en dehors de cette interface. Si vous avez un texte spécifique à traduire, veuillez le fournir ici.
      0
    2. kmsrel48 Posted messages 13 Status Member
       
      Hello;
      thank you for your response, I have already downloaded the firmware but I'm missing the scatter.txt file!!
      by the way, it's a Samsung with a Mediatek processor, can't I flash it with SP Flash Tool?
      0
    3. mikaelac
       
      re

      no, only with Odin PC for Samsung regardless of the processor used.. is that clear my friend? then you are not missing anything at all, the firmware that I am giving you on the Samfirmware site is complete and there's no need to decompress it.. it's a tar.md5 file and not a ZIP? so you take it as it is and put it in the AP box of Odin... then you turn off your phone and restart in download mode and connect to the PC.... you have tutorials for flashing with Odin PC... so don't look for complications when it's simple...
      0
  2. kmsrel48 Posted messages 13 Status Member
     
    Yes, now it's clear, my friend :) - thanks for the info
    now I have another problem, the phone doesn't start in downloading mode by pressing power, home, volume down, but it enters factory mode and there is a list to choose from:
    factory mode:
    item test
    test debug
    clear flash
    ...
    ...
    reboot

    and if I press home, power, volume up, I get the Android robot with the red triangle and exclamation point that takes me in to do the hard reset.
    I hope I'm clear, I'm waiting for your responses please.
    0
    1. mikaelac
       
      There is something wrong... first of all, why did you want to flash your Samsung? What happened or what did you try to do? I even have the impression that you don't have a real Samsung but a copy? Yes or no, and in that case, you need to say so because I don't see how we could help you and I wouldn't appreciate it either, because what I told you applies if you have a real Samsung, it goes like this

      http://www.galaxyrom.com/2016/01/i9060ixmu0apa2-update-galaxy-grand-neo-plus-gt-i9060i-android-4-4-4.html
      0
    2. mikaelac
       
      and what if it's a clone and you didn't tell us anything then figure it out with this for example and that's all I can do

      https://www.youtube.com/watch?v=byEHDrKMT6E
      0
    3. kmsrel48 Posted messages 13 Status Member
       
      excuse my ignorance; I thought it was all easy to do!
      I don't know if it's a real Samsung or a fake, how can I tell?
      It got stuck on the Android logo but won't start! I think I made a big mistake by trying to add files directly through copy/paste.
      0
    4. mikaelac
       
      I don't know... you say you have a Mediatek processor, so apparently it's a Chinese clone because the real one has a Spreadtrum processor... so to me, you have a Chinese copy... and I can't help you except for the video I linked you, which is indeed a Chinese copy with your Mediatek... then, for the principle, saying that you copied files means nothing at all if you don't say which files... as for me, I can't help you any further... good luck...
      0
  3. kmsrel48 Posted messages 13 Status Member
     
    Good evening
    thank you for the video, I'm almost there
    I installed everything correctly, the software, the drivers, I checked the USB cable, and the firmware is also good.
    now when I start the procedure, a red bar appears and then it shows me this error:
    BROM ERROR: S_STORAGE_NOT_MATCHE !!(3183)
    how can I fix this problem please
    0