signal out of range Solved

Question

Hello everyone,I wanted to change the resolution of my screen to have a smaller display, and since then, when I start Windows, I get a message saying "out of range." I have tried booting in safe mode, but no matter which resolution I choose (even 800x600), I still have the same problem. I am using Windows 7 and my graphics card is the ATI Radeon HD 2400 Pro.Thank you for your advice, and have a good day everyone.

poupougne13 · Accepted Answer

Hello... The easiest thing is to temporarily put another screen... you can change it and put the other screen back... the TV can do the job. Best regards, @+ -- "Who wants to climb a mountain starts from the bottom!" Signed: "Gillette" alias "nobody"! ;) (°!°)

jlfa · Answer

OK thanks, it does indeed work with another screen, but not with the one on my PC, I will try with the drivers. Thank you

poupougne13 · Answer

While you are on the other screen, decrease the resolution, and restore the other one... you should have access to it again... -- "Who wants to climb a mountain starts from the bottom!" Signed: "Gillette" a.k.a. "nobody"! ;) (°!°)

jlfa · Answer

I decreased the resolution, but nothing works, it's really strange. I start on another screen, when the PC has started I reconnect my screen (without turning off the PC), and then it works. I change the resolution, but when I restart the PC, it's the same again.

poupougne13 · Answer

Check that the frequency is 60 Hz -- "He who wants to climb a mountain starts from the bottom!" Signed: "Gillette" alias "nobody"! ;) (°!°)

jlfa · Answer

Where? Thank you.

poupougne13 · Answer

In resolution, then advanced, screen... -- "He who wants to climb a mountain starts from the bottom!" Signed: "Gillette" a.k.a. "nobody"! ;) (°!°)

jlfa · Answer

Yes, 60 Hz 32 bits in display it says generic non-plug-and-play monitor, that seems strange to me, doesn't it?

poupougne13 · Answer

And what if you start with the screen that is messing up, and if you press "auto", nothing happens? Have you tried using the working screen to set a lower resolution, shutting it down that way, and restarting directly on the other one...? -- "Who wants to climb a mountain starts from the bottom!" Signed: "Gillette" a.k.a "nobody"! ;) (°!°)

jlfa · Answer

Have you tried using the working screen to lower the resolution, turning it off that way, and restarting on the other one...? Yes, it's the same and even with the lowest resolution. Press auto? I don't see it? Thank you.

poupougne13 · Answer

Auto, it's an OSD adjustment of the screen itself... -- "He who wants to climb a mountain starts from the bottom!" Signed: "Gillette" alias "nobody"! ;) (°!°)

jlfa · Answer

OK it's working again, but I'll never know where it came from, Thank you for everything.

poupougne13 · Answer

Happy for you...! That said, it happened to me just last week, changing the screen fixed the issue right away...like the other times as far as I'm concerned... So..."watch out for hasty adjustments"! ;) Please remember to mark your post as "resolved", under the title and your username...thanks! @+ -- "He who wants to climb a mountain starts from the bottom!" Signed: "Gillette" a.k.a "nobody"! ;)   (°!°)

Signal out of range

13 réponses

Epson printer prints unexpectedly

Texture issues in enshrouded

Find an effective noise-cancelling headset

Payerbest, cancel jacquie et michel subscription

Yaoi anime

Interference on freebox tv

Universal remote code

12-digit phone number

Xbox 360 on a laptop screen

My philips tv turns on by itself at night.