Understanding laptop screws?
Eyjiz
Posted messages
1
Status
Member
-
jeannets Posted messages 28370 Registration date Status Contributor Last intervention -
jeannets Posted messages 28370 Registration date Status Contributor Last intervention -
Hello everyone,
I lost the screws that hold the front and back panels of my computer (the ones located underneath).
On the official Acer reseller's website, I found these 4 types of screws below that correspond to my PC model*.
86.00H67.520 SCRW.NYLOK.M2.L2.5
86.MQJN1.001 SCERW.M2XL2.T0.35.D7.GL.ZN.NYLOK
86.MQJN1.002 SCERW.1.IMS2X3.NI.N
86.MQJN1.003 SCERW.M2.5.L2.5.T0.6
Is anyone able to help me understand the different models? That is, diameter, length, thread pitch...?
Thanks in advance
I lost the screws that hold the front and back panels of my computer (the ones located underneath).
On the official Acer reseller's website, I found these 4 types of screws below that correspond to my PC model*.
86.00H67.520 SCRW.NYLOK.M2.L2.5
86.MQJN1.001 SCERW.M2XL2.T0.35.D7.GL.ZN.NYLOK
86.MQJN1.002 SCERW.1.IMS2X3.NI.N
86.MQJN1.003 SCERW.M2.5.L2.5.T0.6
Is anyone able to help me understand the different models? That is, diameter, length, thread pitch...?
Thanks in advance
- Acer Aspire VN7-571G
2 answers
jeannets
Posted messages
28370
Registration date
Status
Contributor
Last intervention
Ambassadeur
6 598
Hello
86.00H67.520 SCRW.NYLOK.M2.L2.5
M2 is the diameter of 2 mm
L2.5 is the length
the pitch of the thread is based on the diameter, it's standardized.. But in the USA pitch
That's probably what you're looking for https://cgi6.ebay.com/ws/eBayISAPI.dll?ViewStoreV4&name=mscorp&_rdc=1
then, there are cylindrical heads and countersunk heads and the type of screwdriver... Philips, Parker, Torx
but I can't tell you more than that.
86.00H67.520 SCRW.NYLOK.M2.L2.5
M2 is the diameter of 2 mm
L2.5 is the length
the pitch of the thread is based on the diameter, it's standardized.. But in the USA pitch
That's probably what you're looking for https://cgi6.ebay.com/ws/eBayISAPI.dll?ViewStoreV4&name=mscorp&_rdc=1
then, there are cylindrical heads and countersunk heads and the type of screwdriver... Philips, Parker, Torx
but I can't tell you more than that.
