View original (French)

Huawei switch configuration

kodjvi Posted messages 6 Status Member -  
 hermann -
Hello,

As part of my studies, I need to configure 3 Huawei S5700 switches, the first will serve as a collector and have a 4*10G card, and the other two will serve as distribution. Who can help me?

2 answers

Answer 1 / 2
brupala Posted messages 111108 Registration date   Status Member Last intervention   14 434
 
OK,
I don't see at all what you want to do ...
routing?
If that's the case, your numbering plan doesn't work.
You have 2 routing interfaces in the same IP network, impossible.
Then, you mention address 253 which is not configured apparently.

--
and ... There you go!
2
kodjvi Posted messages 6 Status Member
 
Yes, routing! The first switch must connect to the last two from ports gigabit 0/0/2 and 0/0/3
What should I do then?
Should I put the switch's IP address (10.27.236.253 on port 0/0/2?) Which one will I put on 0/0/3?
Thank you
0
brupala Posted messages 111108 Registration date   Status Member Last intervention   14 434 > kodjvi Posted messages 6 Status Member
 
You need to create several IP networks if you want to do routing.
A real numbering plan.
Without defining the overall architecture, you won't achieve anything useful, except playing with switches.
These switches still require proper training to master and build real things.
You don't have any in real life, what are you playing with, a simulator?
Afterwards,
you are not obligated to do routing.
0
kodjvi Posted messages 6 Status Member
 
Yes, I understand, indeed I haven't had any real training that's why I'm asking you to help me, I don't know how to show you my overall architecture with my numbering plan.
0
brupala Posted messages 111108 Registration date   Status Member Last intervention   14 434 > kodjvi Posted messages 6 Status Member
 
Do you have at least one?
After that,
we can help with a blockage, but we're not here to do all your work for you.
Why are you being asked to do this without training and without the machines?
0
kodjvi Posted messages 6 Status Member > brupala Posted messages 111108 Registration date   Status Member Last intervention  
 
"Okay, I understand; it works... "Why are you being asked to do this without training and without the machines?" that's what makes it complicated... but I will try to do my best... Thank you!!"
0