Access to http://sitecom.extender
Solved
louisjacquesm
Posted messages
5
Status
Membre
-
Bob -
Bob -
Hello,
I just bought an N300 Sitecom range extender. I'm trying to install it. The instructions tell me to go to the Internet page http://sitecom.extender. I've tried a thousand times. Each time, I joyfully receive the message: "this page cannot be displayed". Thank you for your help. As you can probably tell, I don't know anything about computers.
Louisjacquesm
I just bought an N300 Sitecom range extender. I'm trying to install it. The instructions tell me to go to the Internet page http://sitecom.extender. I've tried a thousand times. Each time, I joyfully receive the message: "this page cannot be displayed". Thank you for your help. As you can probably tell, I don't know anything about computers.
Louisjacquesm
3 réponses
Hello
I have a solution, you need to set the address to
192.168.0.5 I TESTED IT, IT WORKS..
Login Name: admin
Password: admin
I have a solution, you need to set the address to
192.168.0.5 I TESTED IT, IT WORKS..
Login Name: admin
Password: admin
Hello, have you found a solution please? I still can't access the site http://sitecom.extender..
Thank you for your help
Thank you for your help
Plug the Extender into the power outlet (220 Volts) and then turn it on.
Use a smartphone, tablet, or laptop with a WiFi connection.
Look for a network named Sitecom3fc9fd or similar.
With the smartphone or tablet, connect to this network.
Open your browser and enter http://sitecom.extender
The page should open there. In the top right corner of the page, select the language (Fr)
You will see Username: admin
Enter the password: admin
Then follow the configuration instructions via wizard; F, G, H, I, and J.
After about 1 minute, the signal strength LED will be solid. If it is blinking, you are too far from the modem.
Use a smartphone, tablet, or laptop with a WiFi connection.
Look for a network named Sitecom3fc9fd or similar.
With the smartphone or tablet, connect to this network.
Open your browser and enter http://sitecom.extender
The page should open there. In the top right corner of the page, select the language (Fr)
You will see Username: admin
Enter the password: admin
Then follow the configuration instructions via wizard; F, G, H, I, and J.
After about 1 minute, the signal strength LED will be solid. If it is blinking, you are too far from the modem.
Hi,
Indeed, this site is not working:
But http://sitecom.extender.com on the other hand, yes.
Try it
--
Best regards, Foxstill
Indeed, this site is not working:
But http://sitecom.extender.com on the other hand, yes.
Try it
--
Best regards, Foxstill
Thank you very much for the quick response. I tried http://sitecome.extender.com:, it does exist, but it's a commercial site that has nothing to do with it. According to the installation manual for the Sitecome Range Extender N300, I should be able to enter a "wizard" window.
No way to connect to the "Sitecom wifi range extender n300".
I am following the explanatory video from the technical support whose link is as follows:
http://www.sitecomlearningcentre.com/fr/products/wlx-2006v1001/wi-fi-range-extender-n300
But nothing works, no wizard and no "username" or "password".
How do you connect to the device's wifi network?
When I click on the "networks" icon, I do see Sitecom with the wifi signal, but when I click "connect", I only get Sitecom with an exclamation mark and the label "Limited" and no internet?
The site http://sitecom.extender redirects to an unavailable address...
Thank you in advance, Foxstill, for your help.
I am following the explanatory video from the technical support whose link is as follows:
http://www.sitecomlearningcentre.com/fr/products/wlx-2006v1001/wi-fi-range-extender-n300
But nothing works, no wizard and no "username" or "password".
How do you connect to the device's wifi network?
When I click on the "networks" icon, I do see Sitecom with the wifi signal, but when I click "connect", I only get Sitecom with an exclamation mark and the label "Limited" and no internet?
The site http://sitecom.extender redirects to an unavailable address...
Thank you in advance, Foxstill, for your help.