View original (French)

UEFI: device not detected

princeserika Posted messages 2 Status Member -  
 Anonymous user -
Bonjour, j'ai reçu le message "Reboot and select proper boot device or insert boot media in selected boot device". Quand je vais dans les priorités de démarrage, l'appareil n'est pas détecté. Que dois-je faire ??? Merci.

3 answers

  1.
    phil2k Posted messages 10841 Registration date   Status Contributor Last intervention   2 339
     
    Hello

    this seems to imply that the hard drive is no longer detected.

    Open the case, check the connection of the hard drive, SATA cable, and power supply.
    Also, check the connection of the SATA cable on the motherboard.
    Do this with the power cable unplugged.....

    --
    "To fix something that doesn't work or makes too much noise, all you need to do is hit it with something that works better or makes more noise" The Shadoks
    2
    1. le druide Posted messages 40644 Registration date   Status Contributor Last intervention   6 616
       
      Absolutely, the hard drive is not recognized in the BIOS. You need to open the case and check the connection. Then start the PC and see if the hard drive is spinning; you should feel a vibration by placing a pencil on it, held in your hand.
      0
  2. Anonymous user
     
    Hi,

    The subject is unclear... It concerns UEFI and W7. Rarely are PCs pre-installed this way. It would be helpful to clarify the situation a bit (what was there before? Which W7? 32 or 64 bits? What is the initial problem? Has the BIOS been tampered with?)
    1
  3. le druide Posted messages 40644 Registration date   Status Contributor Last intervention   6 616
     
    Hi,

    which version of Windows? Win 7 or Win 8?

    --
    the druid without the potion.
    0
    1. princeserika Posted messages 2 Status Member
       
      Win 7
      0
    2. le druide Posted messages 40644 Registration date   Status Contributor Last intervention   6 616
       
      Okay, for tonight I'm going to stop soon, you'll need to give us the brand of the phone and the model.
      Just before this issue, you didn't make any changes or install anything?
      0
      1. princeserika > le druide Posted messages 40644 Registration date   Status Contributor Last intervention  
         
        Hi, it's a tower that has been assembled, so there is no brand or model. All I can say is that it was working very well before I unplugged it to install it in another room. There you go :(
        0