Configuration du cisco 887-w

Ouiii

Comment !?

Aref#sh run
Building configuration...

Current configuration : 3057 bytes
!
! Last configuration change at 16:39:25 UTC Tue Feb 24 2015
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Aref
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
memory-size iomem 10
!
!
ip source-route
!
!
ip dhcp excluded-address 192.168.4.254

Aref#sh run
Building configuration...

Current configuration : 2479 bytes
!
! Last configuration change at 09:54:47 UTC Wed Feb 25 2015
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Aref
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$rxpD$KdpRYfFRlC0F0bd6gPRZg.
enable password ***
!
no aaa new-model
memory-size iomem 10
!
!
ip source-route
!
!
ip dhcp excluded-address 192.168.4.254
!
ip dhcp pool Aref
import all
network 192.168.4.0 255.255.255.0
default-router 192.168.4.254
dns-server 212.217.0.1 212.217.0.12 212.217.1.1
lease 0 2
!
!
ip cef
no ipv6 cef
!
!
license udi pid CISCO887W-GN-E-K9 sn FCZ1523C3Q1
!
!
!
!
!
!
!
!
!
!
!
interface BRI0
no ip address
encapsulation hdlc
shutdown
isdn termination multidrop
!
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
pvc 8/35
encapsulation aal5snap
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface wlan-ap0
description internal switch interface connecting to the embedded AP
no ip address
shutdown
arp timeout 0
!
interface Wlan-GigabitEthernet0
description internal switch interface connecting to the embedded AP
!
interface Vlan1
ip address 192.168.4.254 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
hold-queue 100 out
!
interface Dialer0
no ip address
!
interface Dialer1
ip address negotiated
ip mtu 1492
encapsulation ppp
dialer pool 1
ppp authentication chap pap callin
ppp chap hostname arefcasablanca@menara
ppp chap password 7 ***
ppp pap sent-username arefcasablanca@menara password 7 ***
ppp ipcp dns request accept
ppp ipcp wins request
ppp ipcp route default
ppp ipcp address accept
!
ip forward-protocol nd
ip http server
no ip http secure-server
!
ip nat inside source list 102 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
!
access-list 102 permit ip 192.168.4.0 0.0.0.255 any
access-list 102 permit ip 196.206.235.0 0.0.0.255 any
access-list 102 permit ip 212.217.0.0 0.0.0.255 any
access-list 102 permit ip 212.217.1.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
!
!
!
!
control-plane
!
!
line con 0
password ***
login
no modem enable
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0 4
password ***
login local
!
scheduler max-task-time 5000
end

Voila La Configuration que j'ai mis mais je ne sais pas ou est le problème