Cleaning brother printer head
Solved
jeanfrançois1
Posted messages
81
Status
Membre
-
max -
max -
Hello,
My brand new Brother 340 CW printer has printed a maximum of twenty pages with the original cartridges. After a few poorly printed sheets, then completely blank ones, I changed to generic cartridges. A disastrous mistake! The print head is very clogged. Multiple cleanings: not enough. I tried disassembling the print head: failure.
Does anyone have a solution?
Are there cleaning cartridges available? (I couldn't find any at my usual vendor)
Thank you for your informed responses and sunny greetings.
--
J.-F.
My brand new Brother 340 CW printer has printed a maximum of twenty pages with the original cartridges. After a few poorly printed sheets, then completely blank ones, I changed to generic cartridges. A disastrous mistake! The print head is very clogged. Multiple cleanings: not enough. I tried disassembling the print head: failure.
Does anyone have a solution?
Are there cleaning cartridges available? (I couldn't find any at my usual vendor)
Thank you for your informed responses and sunny greetings.
--
J.-F.
Configuration: Windows XP Internet Explorer 7.0
12 réponses
EUREKA !
It's magical, unclogging printer nozzles with vinegar. I had the same problem as many, no more yellow with my Brother DCP-110C printer.
Ready to go buy a new printer, then I stumbled upon this forum where it talks about unclogging nozzles with a syringe and vinegar or alcohol!
I gave it a shot (about 2.5 ml) injected into that little tube at the bottom of the cartridge holder, then cleaned the heads several times until the printed test patterns were good.
And it works perfectly. My printer has regained its colors.
However, I don't know where the 2.5 ml of vinegar went!! Evaporated? Mixed with the ink? Mystery, but who cares, the important thing is that it works.
EDIT: It is recommended to use a non-corrosive cleaning liquid: https://www.amazon.fr/s/ref=nb_sb_noss_1?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&url=search-alias%3Daps&field-keywords=nettoyage+imprimante&rh=i%3Aaps%2Ck%3Anettoyage+imprimante
So, don’t throw away your printers without trying this tip!
See you soon.
It's magical, unclogging printer nozzles with vinegar. I had the same problem as many, no more yellow with my Brother DCP-110C printer.
Ready to go buy a new printer, then I stumbled upon this forum where it talks about unclogging nozzles with a syringe and vinegar or alcohol!
I gave it a shot (about 2.5 ml) injected into that little tube at the bottom of the cartridge holder, then cleaned the heads several times until the printed test patterns were good.
And it works perfectly. My printer has regained its colors.
However, I don't know where the 2.5 ml of vinegar went!! Evaporated? Mixed with the ink? Mystery, but who cares, the important thing is that it works.
EDIT: It is recommended to use a non-corrosive cleaning liquid: https://www.amazon.fr/s/ref=nb_sb_noss_1?__mk_fr_FR=%C3%85M%C3%85%C5%BD%C3%95%C3%91&url=search-alias%3Daps&field-keywords=nettoyage+imprimante&rh=i%3Aaps%2Ck%3Anettoyage+imprimante
So, don’t throw away your printers without trying this tip!
See you soon.
See you soon