A voir également:
- Code erreur 6 A 00 sur MP 600
- Code ascii - Guide
- Comment déverrouiller un téléphone quand on a oublié le code - Guide
- Code puk bloqué - Guide
- Code activation windows 10 - Guide
- Mp moi - Forum Mail
2 réponses
Bonjour,
Votre réservoir d'encre usagé est probablement plein.
Voilà la manip à effectuer:
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key. soory je n'ai pas trouvé en français
Votre réservoir d'encre usagé est probablement plein.
Voilà la manip à effectuer:
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key.
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key. soory je n'ai pas trouvé en français
l'ensemble du clavier est bloqué sauf marche / arrêt